3M Dynapro ET 350 R Manuals

Installing the Rack Mount ET 350 Monitor (Model 350R), ET 3170 Terminal, and ET 3200 Series Computers 3M Touch Systems Proprietary Information 1 Intended Use When properly installed using the materials provided, and according to these instructions, the rack mount is intended to mount the 3M DynaproTM ET 350 monitor, the ET 3170 terminal, and ET 3200 series computers for use in a standard 19-inch EIA rack. Product safety information Read and understand all safety information in this document before installing and using the rack mount. Equipment Materials supplied The Rack Mount Kit comes with the following items: ! 1 rack adapter (the example illustrated below is the adapter for the ET 3170 terminal or ET 3210 computer) ! 8 clip nuts ! 12 Phillips #10-32 x ½ inch panhead machine screws ! 12 flat washers ! 12 lock washers ! 8 slotted #10-32 x 5/8 inch countersunk machine screws ! 8 cup washers Tools Required ! No. 2 Phillips screwdriver ! Large flat-blade screwdriver WARNING To reduce the risks associated with fire and explosion which, if not avoided, could result in death or serious injury and/or property damage. ! Use the materials provided so that installation of the ET unit will not result in a hazardous condition due to uneven mechanical loading. WARNING To reduce the risks associated with electrical shock or fire which, if not avoided, may result in death or serious injury and/or property damage: ! Follow all product and accessory installation instructions. WARNING To reduce the risks associated with electrical shock or fire which, if not avoided, could result in death or serious injury and/or property damage: ! Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g., use of power strips). ! Consideration should be given to the connection of the ET unit to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern. CAUTION To reduce the risks associated with fire which, if not avoided, may result in minor or moderate injury or cause property damage. ! Installation of the ET unit in a rack should be such that the amount of air flow required for safe operation of the unit is not compromised. 73145_a