3onedata IMF204-2F Series Manuals

IMF204-2F Series Ring Network Serial to Fiber MODEM Quick Installation Guide 3onedata Co., Ltd. Address: 3/B, Zone 1, Baiwangxin High Technology Industrial Park, Song Bai Road, Nanshan District, Shenzhen, 518108, China Website: www.3onedata.com Tel: +86 0755-26702688 Fax: +86 0755-26703485 【Package Checklist】 Please check whether the package and accessories are intact while using the device for the first time. 1 Serial to fiber MODEM 2 Quick installation guide 3 Lug x2 4 Power line ( AC standard feature ) 5 Warranty card 6 Certification If any of these items are damaged or lost, please contact our company or dealers, we will solve it ASAP. 【Product Overview】 The products of this series are industrial unmanaged ring network serial to fiber MODEM, Models are as follow: Model I. IMF204-2F-4DI(RS-485)-P(12~48VDC) (2 fiber interfaces + 4 RS-485 serial ports, 12~48VDC) Model II. IMF204-2F-4DI(RS-485)-P(100~240VAC) (2 fiber interfaces + 4 RS-485 serial ports, 100~240VAC) 【Panel Design】  Front View  Rear View Model I Model II 1. Serial port transmitting and receiving data indicators 2. Fiber port connection status indicator 3. Master/Slave device status indicator 4. Running status indicator 5. DIP switch 6. Console port 7. Fiber interface 8. RS-485 serial port 9. Terminal block of 12~48VDC power supply input 10. Terminal block of 100~240VAC power supply input 【Mounting Dimension】 Unit: mm Note before mounting:  Don't place or install the device in area near water or moist, keep the relative humidity of the device surrounding between 5%~95% without condensation.  Before power on, first confirm the supported power supply specification to avoid over-voltage damaging the device.  The device surface temperature is high after running; please don't directly contact to avoid scalding. 【Wall-mounted Device Mounting】 Step 1 Adopt a M3 screw to install the left/right mounting board on the device backboard. Step 2 On the wall of device mounting, place the device on the wall for reference or refer to the mounting dimension to mark two screw positions. Step 3 Attach the equipment to the marked wall and