ABB Navigator 550 Manuals

— ABB MEASUREMENT & ANALY TICS | OPER ATING INSTRUCTION | OI/ASO550 -EN REV. G Navigator 500 Sodium analyzer Measurement made easy Introduction The Navigator 500 sodium analyzer is designed to provide continuous monitoring and control of power station boiler feed water / steam condensate. The analyzer comprises a Navigator 540 transmitter with multiple wet-section capability for up to 4 wet- sections. This Operating Instruction provides installation, operation and maintenance procedures for the Navigator 550 sodium wet-section and a Navigator 540 transmitter. — Navigator 500 sodium analyzer

— ABB MEASUREMENT & ANALY TICS | COMMISSIONING INSTRUCTIONS | CI/AHM550 -EN REV. D Navigator 550 Hydrazine wet-section Measurement made easy Introduction This publication provides commissioning instructions for the Navigator 550 hydrazine wet- section. The wet-section is used in conjunction with the Navigator 540 transmitter. Note. Purchase or prepare the correct solutions prior to commissioning: • to purchase solutions, contact your local ABB representative • to prepare solutions, refer to Solution preparation (overleaf) For more information Further publications are available for free download from:   abb.com/measurement or by scanning this code: Search for or click on Data Sheet Navigator 500 Hydrazine analyzer DS/AHM550-EN Operating Instruction Navigator 500 Hydrazine analyzer OI/AHM550-EN Commissioning Instruction Navigator 540 transmitter CI/AWT540-EN — Navigator 550 hydrazine wet-section

— ABB MEASUREMENT & ANALY TICS  |  INFORMATION  |  INF13/141-EN REV. B Navigator 550 Hydrazine and sodium wet-sections Flowmeter upgrade procedures (single-stream and multi-stream) Measurement made easy 1 Introduction These procedures must be carried out by a trained technician. Tools required • Adjustable spanner 2 For more information Further information is available from:   www.abb.com/analytical or by scanning these codes: Sales Service Navigator 550 hydrazine and sodium wet-sections

— ABB MEASUREMENT & ANALY TICS | COMMISSIONING INSTRUCTIONS | CI/ADS550 – EN REV. D Navigator 550 Low level dissolved oxygen wet-section Measurement made easy Introduction This publication provides commissioning instructions for the Navigator 550 low level dissolved oxygen wet-section. The wet-section is used in conjunction with the Navigator 540 transmitter. For more information Further publications are available for free download from: www.abb.com/measurement or by scanning this code: Search for or click on Data Sheet Navigator 500 dissolved oxygen analyzer DS/ADS550-EN Operating Instruction Navigator 500 low level dissolved oxygen analyzer OI/ADS550-EN Commissioning Instruction Navigator 540 transmitter CI/AWT540-EN — Navigator 550 low level dissolved oxygen wet-section

Operating instructions OI/AHM550–EN Rev. A Navigator 500 Hydrazine analyzer Measurement made easy Introduction The Navigator 500 hydrazine analyzer is designed to provide continuous monitoring and control of power station boiler feed water. The analyzer comprises a Navigator 540 transmitter with multiple wet-section capability for up to 4 wet-sections. These Operating instructions provide installation, operation and maintenance procedures for the Navigator 550 hydrazine wet-section and a Navigator 540 transmitter. For more information Further publications for the Navigator 500 hydrazine analyzer are available for free download from: www.abb.com (see links and reference numbers below) or by scanning this code: search for or click on: Navigator 550 hydrazine wet-section Commissioning instructions CI/AHM550-EN Navigator 540 transmitter Commissioning instructions CI/AWT540-EN

— ABB MEASUREMENT & ANALY TICS  |  INFORMATION  |  INF13/124 -EN REV. B Navigator 550 Low level dissolved oxygen wet-section Sensor assembly spares replacement procedures Measurement made easy 1 Introduction These procedures must be carried out by a trained technician. 2 For more information Further information is available from:   www.abb.com/analytical or by scanning these codes: Sales Service Navigator 550 low level dissolved oxygen wet-section

— ABB MEASUREMENT & ANALY TICS | INFORMATION | INF12/113 -EN REV. C Navigator 550 Low level dissolved oxygen wet-section Spares replacement procedures Measurement made easy 1 Introduction These procedures must be carried out by a trained technician. Tools required • Pozidrive screwdriver • Slot-head terminal screwdriver • Anti-static strap. 2 For more information Further information is available from: www.abb.com/analytical or by scanning these codes: Sales Service Navigator 550 low level dissolved oxygen wet-section

Information INF13/114–EN Navigator 550 Hydrazine wet-section Spares replacement procedures 1 Safety 2 Tools required  Pozidrive screwdriver  Slot-head terminal screwdriver  Anti-static strap. 3 Replacement procedures Warning. These procedures must be carried out by a trained technician. CHEMICAL  Ensure personal protective equipment (PPE) such as gloves and eye protection are worn during any maintenance.  Observe all health and safety procedures for handling chemicals.  To familiarize yourself with handling precautions, dangers and emergency procedures, always review the Material Safety Data Sheets prior to handling containers, reservoirs and delivery systems that contain chemical reagents and standards.  Take care if cleaning any spillages and observe all relevant safety instructions. Wipe up any spillages using clean water.  Perform general cleaning of the wet-section using a damp cloth only – mild detergent can be used as a cleaning aid. Do not use Acetone or any organic solvents. ELECTRICAL  Isolate all high voltage supplies to the transmitter before performing replacement procedures.  The wet-section is vulnerable to electrostatic damage. Wear an anti-static strap or dismantle the wet-section on an anti-static workbench.  Ensure all electrical connections are kept dry at all times. GENERAL  Shut off the external sample supply to the wet-section before performing replacement procedures. When a procedure is complete, restore power to the transmitter, sample to the wet-section at the correct flow rate and, if necessary, calibrate the wet-section – refer to the wet-section Operating Instructions (OI/AHM550-EN) for calibration instructions.  Dispose of the old components in accordance with the guidelines contained in the Operating instructions (OI/AHM550-EN). Fig. 3.1 Low level dissolved oxygen wet-section – replacement procedures Modbus cable assembly – see Section 3.1, page 2 PCB housing seals, PCB cover and PCB – see Section 3.1, page 2 Flowmeter assembly and flowmeter cable – see Section 3.2, page 2 Constant-head assembly, pressure switch assembly and pressure switch cable – see Section 3.4, page 3 Solenoid valve assembly and solenoid valve cable – see Section 3.4, page 3