Acrosser Technology AR-B9461C Manuals

Page 1 of 2 AR-B9461C Manual AR-B9461C Manual Version 1.0 1. AR-B9461C SYSTEM SETTING The AR-B9461C is 94.5*102mm I/O board. This section provides hardware’s jumpers setting, the connectors’ locations, and the pin assignment. 1.1. PACKING LIST ! The quick setup manual ! AR-B9461C I/O board ! Software utility CD. 1.2. HARD DISK CONNECTOR (IDE1, IDE2) 1 2 44 43 NOTE: The IDE1 connector will only work when, IDE2 connector has been connected to the CN4 of AR-B1550H. It is designed for testing purpose, users are not recommended to connect IDE device to this connector directly. 1.3. PC104 CONNECTOR (CN3) 1 2 64-Pin PC/104 Connector 63 64 -IOCHCK --- SD7 --- SD6 --- SD5 --- SD4 --- SD3 --- SD2 --- SD1 --- SD0 --- IOCHRDY--- AEN --- SA19 --- SA18 --- SA17 --- SA16 --- SA15 --- SA14 --- SA13--- SA12 --- SA11 --- SA10 --- A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28 A29 A30 A31 A32 --- GND --- RSTDRV --- +5 VDC --- IRQ9 --- +3 VDC ---DREQ2 --- IRQ1 --- /IRQ8 --- IRQ12 --- GND --- /RTCCS --- RTCALE --- -IOW --- -IOR -----DACK3 --- DREQ3 --- -DACK1 --- DREQ1 --- -REFRESH --- BUSCLK --- IRQ7 SA9 --- SA8 --- SA7 --- SA6 --- SA5 --- SA4 --- SA3 --- SA2 --- SA1 --- SA0 --- GND --- B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 B25 B26 B27 B28 B29 B30 B31 B32 --- IRQ6 --- IRQ5 --- IRQ4 --- IRQ3 --- -DACK2 --- TC --- BALE --- +5 VDC --- 24M --- GND --- GND 1 2 1.4. KB & MOUSE CONNECTOR (CN4) 1 6 1-MOUSE DATA 2-KB DATA 3-GND 4-VCC 5-MOUSE CLOCK 6-KB CLOCK CN4 1.5 BATTERY JUMPER (JP3) 1 3 JP1 1-2 EXTERNAL BATTERY 2-3 ON-BOARD BATTERY 1.6 IR. HEADER (J2) 1 5 1-VCC 2-NOT USED 3-IRRX 4-GND 5-IRTX J2 1.7 EXT.BATT (J1) J1 1-EXBAT 2-GND 1 1.8 COMPACT FLASH SELECT (JP4) M 1-2Master 2-3Slave JP4 S