ACT ACTSMART2 Manuals

ACTsmart2 system Network System Product Overview ACTsmart2 System allows easy configuration and maintenance of the ACTsmart2 devices. It consists of a Windows PC application (ACTWin Smart), the ACTsmart2 controller unit and a cable to connect the controller to the PC. The ACTsmart2 devices are available as Proximity, PIN and Proximity and PIN only. For cards and fobs for the ACTsmart2 System, please use ACTProx cards and fobs (see our Ordering Section for further details). Main Features Simple graphical interface Digital keypad backlighting (ACTsmart2 1080/1090) 1 to 8 doors 1000 users 16 user groups 100,000 event log on PC 1,000 event log buffer on controller Flash upgrade facility Built in translation facility Rapid on the fly downloading Choice of reader types Proximity, Pin and Proximity and Pin only Installation / Specification Guidelines The ACTsmart2 system is designed to suit access control systems for small to medium sized enterprises or facilities The lock and door controls are contained in the reader and no other controller other than the ACTsmart2 controller is required The ACTsmart2 system is strictly an access control system. Please review the comparison chart on the reverse side of this leaflet to ensure it is suitable for customer’s requirements The maximum cabling distance between the PC and the Smart2 controller is 30 metres The maximum network cabling for the readers is 1.4km of twisted screen pair or category 5 The controller, readers etc require a 12volt dc supply ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ACTsmart2 System Schematic ACTsmart2 System ACTsmart2 Readers networked to a PC via an ACTsmart2 Controller For full functionality use 12 volts DC only ACTsmart2 Controller ACTsmart2 1080 Pin & Proximity ACTsmart2 1090 Pin Only Max 8 Units ACTsmart2 1070 Proximity Only C M Y CM MY CY CMY K