ACTi CAM-6600 Series Manuals

3 pdf manual(s) ACTi CAM-6600 Series for free download (Document Types: Quick installation manual, Hardware user manual)

ACTi CAM-6600 Series Quick installation manual [PDF] (13 pages)

  • Identifier: id-954763
  • Brand: ACTi
  • Device: CAM-6600 Series Security Camera
  • Type: PDF
  • Key Aspects: Pre-Installation Safety Requirements, Emergency Shutdown Procedures, Performance Optimization Tips
  • UPD Date: 07.07.2026
  • Source File: 1203748.pdf
  • Pages: 13
  • Description: Product operation manual for the ACTi CAM-6600 Series.
Pages Preview:
  • 1 Getting Started 1.1 PACKAGE CONTENTS CAM-6510 Warranty Card Software CD Power & A/V Cable LAN/WAN Cable Power Adaptor 5.4” Transparent Cover Decoration Ring / Fixing Plate 1
  • 1.2 PHYSICAL DESCRIPTION Indoor High Speed Dome Bottom 1. Reset Button Step 1: Switch off IP device by disconnecting the power cable Step 2: Press and continue to hold the Reset Button. Reconnect the power cable while continuing to hold the reset button. Step 3: Keep holding the reset button depressed around 6 seconds, release the reset button. The unit will start up with factory default settings. 2. Communication Switch Setting The table below shows the f
  • Use the switch to change your speed dome ID by turning the arrow to the desired number respectively. For instance, if the speed dome ID is 123, the ID switch should be set as below: centesimal decimal single digit NOTE: If controlling through an ACTi decoder via analog means such as a keyboard or DVR, no two speed domes should be given the same ID or communication conflict may occur. When controlled only through Ethernet and software (without the
  • decimal single digit 5. 16 Pin Connector for LAN/WAN The LAN/WAN cable (shown as the figure below) is shipped with IP high speed dome. Please find it in the accessory bag. 6. 22 Pin Connector A 50cm data cable (shown as the figure below) is shipped with IP high speed dome. Please find it in the accessory bag. Power Input PIN NAME DESCRIPTION 1 AC24V AC 24V of Power Input 2 E-GND E-Ground Pin of Power Input 3 AC24V AC 24V of Power Input 7. Cable Wiri
  • The alarm pins are serviceable for connecting alarm input and output devices, such as alarm sensors, sirens or flashing light with the surveillance system. The table shown as follows lists the definition of alarm pins on the 22-pin connector.
Document Preview & Text Transcription (Main Page)
Click to expand and read text
IP Indoor High Speed Dome CAM-6510 Ver. 090318 Quick Installation Guide

ACTi CAM-6600 Series Hardware user manual [PDF] (68 pages)

  • Identifier: id-106014
  • Brand: ACTi
  • Device: CAM-6600 Series Security Camera
  • Type: PDF
  • Key Aspects: Technical Support and Resource Links, Recommended Spare Parts List, Control Panel and Interface Navigation
  • UPD Date: 03.05.2026
  • Source File: 6789.pdf
  • Pages: 68
  • Description: General instruction manual for the ACTi CAM-6600 Series.
Pages Preview:
  • 0-1 0 PRECAUTIONS 1. Read these instructions All the safety and operating instructions should be read before the product is operated. 2. Heed all warnings All warnings on the product and in the instruction manual should be adhered to. The symbol indicates the following items, please carefully read the description next to each symbol. a. Failure to follow the safety instruction given may directly endanger people, cause damage to the system or to other e
  • 0-2 typographical or technical errors and reserve the right to make changes to the product and manuals without prior notice. FCC/CE Regulation NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, us
  • 0-3 Table of Contents 0 PRECAUTIONS________________________________________________ 0-1 Copyright __________________________________________________________________ 0-1 Trademarks ________________________________________________________________ 0-1 Liability ___________________________________________________________________ 0-1 FCC/CE Regulation __________________________________________________________ 0-2 1 INTRODUCTION _________________________________
Document Preview & Text Transcription (Main Page)
Click to expand and read text
IP Outdoor High Speed Dome CAM-6600 series Ver. 090318 Hardware User’s Manual

ACTi CAM-6600 Series Quick installation manual [PDF] (15 pages)

  • Identifier: id-2238441
  • Brand: ACTi
  • Device: CAM-6600 Series Security Camera
  • Type: PDF
  • Key Aspects: Basic Configuration Guidelines, Hardware Setup Instructions, Manufacturer Contact and Support Data
  • UPD Date: 23.03.2026
  • Source File: 2049191.pdf
  • Pages: 15
  • Description: Device guide for the ACTi CAM-6600 Series.
Pages Preview:
  • 1 Getting Started 1.1 PACKAGE CONTENTS CAM-6600 series Warranty Card Software CD Power & A/V Cable LAN/WAN Cable Alarm Cable 5.4” Transparent Cover Power Adaptor (Option) Lubricant Screws 1
  • 1.2 PHYSICAL DESCRIPTION Outdoor High Speed Dome Bottom 1. Reset Button Step 1: Switch off IP device by disconnecting the power cable Step 2: Press and continue to hold the Reset Button. Reconnect the power cable while continuing to hold the reset button. Step 3: Keep holding the reset button depressed around 6 seconds, release the reset button. The unit will start up with factory default settings. 2. Communication Switch Setting The table below shows the
  • number respectively. For instance, if the speed dome ID is 123, the ID switch should be set as below: centesimal decimal single digit NOTE: No two speed domes should be given the same ID, or communication conflict may occur. NOTE: The number “0” should locate upwards as shown in above diagram for correct switch definition. 4. Dome Control Protocol Protocol is a specific set of rules, procdures used for data communications. Basing on the protoco
Document Preview & Text Transcription (Main Page)
Click to expand and read text
IP Outdoor High Speed Dome CAM-6600 series Ver. 070307 Quick Installation Guide

ACTi CAM-6600 Series: Security Camera Category Related Instructions

FD8164
Vivotek FD8164
11.04.2026 201 pages

User’s Manual FD8164/8164V Fixed Dome Network Camera 2MP • H.264 • MicroSD/SDHC/SDXC • Compact Design Rev. 1.1 Product operation guide for the Vivotek FD8164 Security Camera. This reference manual outlines interface navigation, hardware setup, startup procedures.

Mini Cube IPC2202
HOME8 Mini Cube IPC2202
11.04.2026 12 pages

User Manual Mini Cube HD Camera (IPC2202) Technical operations guide for the HOME8 Mini Cube IPC2202 Security Camera. The manual elaborates on features and maintenance guidelines, technical assistance, software updates.

2CU-Z301-AHD
2seeU 2CU-Z301-AHD
03.08.2026 2 pages

D N (AGC) N D (AGC) SETUP MENU Thank you for your purchase of this product. Before attempting to connect or operate this product, please read these instructions completely. The above drawing is for reference only. MODEL: 1/3” SONY Exmor IMX238 CMOS Pro Device operation guide for the 2seeU 2CU-Z301-AHD Security Camera. It contains information on wiring setup, technical assistance, connectivity setup, troubleshooting tips.

C905IP
ELRO C905IP
18.08.2026 2 pages

QUICK START GUIDE Download your OMGUARD APP GB DE PL NL FR ES 1- Camera x 1, stand x 1, antenna x 1, power adapter x 1, screw pack x 1, manual CD x 1, Quick Start Guide x 1. 2- Power up the camera and receiver. Connect the camera to Wi-Fi router 3- Download th Instruction guide for the ELRO C905IP Security Camera. This reference manual outlines setup validation, software updates, functional overview, wiring diagrams.