Adamson IS Series Manuals

Adamson Systems Engineering | Table of Contents Read these instructions, keep them available for reference. This manual can be downloaded from Heed all warnings and follow all instructions. A qualifi ed technician must be present during the installation and use of this product. This product is capable of producing extremely high sound pressure levels and should be used according to the specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will not be liable for damages caused by any possible misuse of this product. Servicing is required when the loudspeaker has been damaged in any way, such as when the loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not operate normally. Inspect your products regularly for any visual or functionality irregularities. Protect the cabling from being walked on or pinched. Read the appropriate IS-Series Rigging Manual before installing the product. Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives. Safety & Warnings ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ 3 4 5 6 7 8 9 In an effort to continuously improve its products, Adamson releases updated accompanying software, presets and standards for its products. Adamson reserves the right to change the specifications of its products and the content of its documents with no prior notice. Page 1 IS7 User Manual Distribution Date: May 1st, 2021 Copyright 2021 by Adamson Systems Engineering Inc.; all rights reserved This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe place and make it available upon request to any operator. Resale of this product must include a copy of this manual. This manual can be downloaded from Declarations EU Declaration of Conformity Adamson Systems Engineering declares that the products stated below are in conformance with the relevant fundamental health and safety criteria of the applicable EC Directive(s), in particular: Signed at Port Perry, ON. CA - May 1st, 2021 ------------------------------------------------ Brock Adamson (President & CEO) ADAMSON SYSTEMS ENGINEERING, Inc. 1401 Scugog Line 6, Port Perry (ON), L9L 1B2, Ontario, Canada T: +1 905 982 0520, F: +1 905 982 0609 Email: [email protected] Website: www.adamsonsystems.com IS7 User Manual Directive 2014/35/EU: Low Voltage Directive IS7 - 971-0003, 971-0004, 971-0006, 971-5003, 971-5004, 971-5006 Directive 2006/42/EC: Machinery Directive IS7/IS118 Rigging Frame - 930-0026, 930-5026 Extended Beam - 930-0021, 930-5021 Moving Point Extended Beam - 930-0033, 930-5033 IS7 Micro Frame - 930-0029, 930-5029 Extended Lifting Plates - 932-0043 Line Array H-Clamp - 932-0047 https://adamsonsystems.com/support/downloads-directory/is-series/is7 Adamson Systems Engineering | Table of Contents Read these instructions, keep them available for reference. This manual can be downloaded from Heed all warnings and follow all instructions. A qualifi ed technician must be present during the installation and use of this product. This product is capable of producing extremely high sound pressure levels and should be used according to the specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will not be liable for damages caused by any possible misuse of this product. Servicing is required when the loudspeaker has been damaged in any way, such as when the loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not operate normally. Inspect your products regularly for any visual or functionality irregularities. Protect the cabling from being walked on or pinched. Read the appropriate IS-Series Rigging Manual before installing the product. Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives. Safety & Warnings ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ 3 4 5 6 7 8 9 In an effort to continuously improve its products, Adamson releases updated accompanying software, presets and standards for its products. Adamson reserves the right to change the specifications of its products and the content of its documents with no prior notice. Page 3 IS7 User Manual https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is7 1. Safety & Warnings 2. Product Introduction 3. Wiring 4. Amplification 5. Presets & Control 6. Weatherized 7. Technical Specifications Adamson Systems Engineering | Page 4 IS7 User Manual IS7 • The IS7 is an ultra-compact line array enclosure designed for medium throw applications. It contains two symmetrically arrayed 7” LF transducers and a 3” HF compression driver mounted onto an Adamson sound chamber. The high frequency sound chamber is designed to couple multiple cabinets across the entire intended frequency band without loss of coherence. • The operational frequency range of the IS7 is 80 Hz to 18 kHz. The use of proprietary technologies such as Controlled Summation Technology and Advanced Core Architecture allow high maximum SPL and maintains a consistent nominal horizontal dispersion pattern of 100° down to 400 Hz. • The enclosure has an unobtrusive visual design which blends seamlessly into the surrounding space, is made of marine grade birch plywood, and has a four-point rigging system. Without sacrificing low resonance to composite material, the IS7 weighs only 14 kg / 30.9 lbs. • Up to sixteen IS7 can be flown in the same array when using the IS7/IS118 Rigging Frame and up to eight when using the IS7 Micro Frame. Nine rigging positions are available, allowing vertical inter-cabinet splay angles from 0° to 10°. Always consult Blueprint AV™ and the IS-Series Line Array Rigging Manual for correct rigging positions (including ground stacking options) and installation procedures. • The IS7 is intended to be used as a standalone system or with the IS118 companion subwoofer, which brings the usable frequency range down to 35 Hz. The IS7 can also be paired with other IS-Series subwoofers. • The IS7 is designed for use with Lab.gruppen’s D-Series line of installation amplifiers. The nominal impedance of the IS7 is 16 Ω per band, maximizing amplifier efficiency. IS7 Ultra Compact Line Array

Adamson Systems Engineering | Table of Contents Read these instructions, keep them available for reference. This manual can be downloaded from Heed all warnings and follow all instructions. A qualifi ed technician must be present during the installation and use of this product. This product is capable of producing extremely high sound pressure levels and should be used according to the specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will not be liable for damages caused by any possible misuse of this product. Servicing is required when the loudspeaker has been damaged in any way, such as when the loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not operate normally. Inspect your products regularly for any visual or functionality irregularities. Protect the cabling from being walked on or pinched. Read the appropriate IS-Series Rigging Manual before installing the product. Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives. Safety & Warnings ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ 3 4 5 6 7 8 9 In an effort to continuously improve its products, Adamson releases updated accompanying software, presets and standards for its products. Adamson reserves the right to change the specifications of its products and the content of its documents with no prior notice. Page 1 IS119 User Manual Distribution Date: May 1st, 2021 Copyright 2021 by Adamson Systems Engineering Inc.; all rights reserved This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe place and make it available upon request to any operator. Resale of this product must include a copy of this manual. This manual can be downloaded from Declarations EU Declaration of Conformity Adamson Systems Engineering declares that the products stated below are in conformance with the relevant fundamental health and safety criteria of the applicable EC Directive(s), in particular: Signed at Port Perry, ON. CA - May 1st, 2021 ------------------------------------------------ Brock Adamson (President & CEO) ADAMSON SYSTEMS ENGINEERING, Inc. 1401 Scugog Line 6, Port Perry (ON), L9L 1B2, Ontario, Canada T: +1 905 982 0520, F: +1 905 982 0609 Email: [email protected] Website: www.adamsonsystems.com IS119 User Manual Directive 2014/35/EU: Low Voltage Directive IS119 - 994-0005, 994-0006, 994-0012, 994-5005, 994-5006, 994-5012 Directive 2006/42/EC: Machinery Directive IS10 & IS119 Support Frame - 930-0028, 930-0035, 930-5028 Extended Beam - 930-0021, 930-5021 Moving Point Extended Beam - 930-0033, 930-5033 IS10 Micro Frame - 930-0030, 930-5030 Line Array H-Clamp - 932-0037 https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is119 Adamson Systems Engineering | Table of Contents Read these instructions, keep them available for reference. This manual can be downloaded from Heed all warnings and follow all instructions. A qualifi ed technician must be present during the installation and use of this product. This product is capable of producing extremely high sound pressure levels and should be used according to the specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will not be liable for damages caused by any possible misuse of this product. Servicing is required when the loudspeaker has been damaged in any way, such as when the loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not operate normally. Inspect your products regularly for any visual or functionality irregularities. Protect the cabling from being walked on or pinched. Read the appropriate IS-Series Rigging Manual before installing the product. Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives. Safety & Warnings ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ 3 4 5 6 7 8 9 In an effort to continuously improve its products, Adamson releases updated accompanying software, presets and standards for its products. Adamson reserves the right to change the specifications of its products and the content of its documents with no prior notice. Page 3 IS119 User Manual 1. Safety & Warnings 2. Product Introduction 3. Wiring 4. Amplification 5. Presets & Dispersion 6. Weatherized 7. Technical Specifications https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is119 Adamson Systems Engineering | Page 4 IS119 User Manual IS119 • The IS119 is a sub-compact subwoofer enclosure designed for extended LF capabilities. It contains one ND19-S 19” LF driver. • The operational frequency range of the IS119 is 30 Hz to 100 Hz. The use of proprietary techologies such as Advanced Cone Architecture give the IS119 an extremely high maximum SPL level. • The enclosure has an unobtrusive visual design which blends seamlessly into the surrounding space, including identical grills at the front and back so cardioiod deployments appear identical to non-cardioid. It is made of marine grade birch plywood, and has an aluminum rigging system mounted on each corner. Without sacrificing lowered resonance to composite material, the IS119 is able to maintain a low weight of 44.5 kg / 98 lbs. • Up to twenty IS119 can be flown when using the IS10 & IS119 Support Frame and can also be flown in the same array as the IS10 when using an additional IS10 & IS119 Support Frame. Always consult Blueprint AV™ and the IS- Series Line Array Rigging Manual for correct rigging positions (including ground stacking options) and installation procedures. • The IS119 is designed for use with Lab.gruppen’s D-Series line of installation amplifiers. The nominal impedance of the IS119 is 8 Ω. IS119 Sub Compact Subwoofer

Adamson Systems Engineering | Table of Contents Read these instructions, keep them available for reference. This manual can be downloaded from Heed all warnings and follow all instructions. A qualifi ed technician must be present during the installation and use of this product. This product is capable of producing extremely high sound pressure levels and should be used according to the specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will not be liable for damages caused by any possible misuse of this product. Servicing is required when the loudspeaker has been damaged in any way, such as when the loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not operate normally. Protect the cabling from being walked on or pinched. Read the appropriate IS-Series Rigging Manual before installing the product. Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives. Safety & Warnings ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ 3 4 5 6 7 8 In an effort to continuously improve its products, Adamson releases updated accompanying software, presets and standards for its products. Adamson reserves the right to change the specifications of its products and the content of its documents with no prior notice. Page 1 IS7 User Manual Distribution Date: March 1st, 2021 Copyright 2021 by Adamson Systems Engineering Inc.; all rights reserved This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe place and make it available upon request to any operator. Resale of this product must include a copy of this manual. This manual can be downloaded from Declarations EU Declaration of Conformity Adamson Systems Engineering declares that the products stated below are in conformance with the relevant fundamental health and safety criteria of the applicable EC Directive(s), in particular: Signed at Port Perry, ON. CA - March 1st, 2021 ------------------------------------------------ Brock Adamson (President & CEO) ADAMSON SYSTEMS ENGINEERING, Inc. 1401 Scugog Line 6, Port Perry (ON), L9L 1B2, Ontario, Canada T: +1 905 982 0520, F: +1 905 982 0609 Email: [email protected] Website: www.adamsonsystems.com IS7p User Manual Directive 2014/35/EU: Low Voltage Directive 967-0001 IS7p - 70 x 40 967-0002 IS7pb - 70 x 40 967-0003 IS7p - 100 x 50 967-0004 IS7pb - 100 x 50 Directive 2006/42/EC: Machinery Directive 930-0031 IS7p & IS10p Fill Plate 930-0032 IS7p Short Fill Plate 934-0027 IS7p Horizontal Bracket 934-0028 IS7p Vertical Bracket 934-0026 IS-Series Sight Mount 932-0006 Bracket C-Clamp 932-0039 IS-Series Pole Mount Adapter 932-0040 IS-Series C-Clamp 932-0041 IS-Series Point H-Clamp 932-0042 IS-Series Tilt Adaptor 932-0044 IS-Series Sight Mount LInk 934-0031 IS-Series Super Sight Mount 934-0032 IS-Series Articulator https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is7p Adamson Systems Engineering | Table of Contents Read these instructions, keep them available for reference. This manual can be downloaded from Heed all warnings and follow all instructions. A qualifi ed technician must be present during the installation and use of this product. This product is capable of producing extremely high sound pressure levels and should be used according to the specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will not be liable for damages caused by any possible misuse of this product. Servicing is required when the loudspeaker has been damaged in any way, such as when the loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not operate normally. Protect the cabling from being walked on or pinched. Read the appropriate IS-Series Rigging Manual before installing the product. Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives. Safety & Warnings ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ 3 4 5 6 7 8 In an effort to continuously improve its products, Adamson releases updated accompanying software, presets and standards for its products. Adamson reserves the right to change the specifications of its products and the content of its documents with no prior notice. Page 3 IS7 User Manual https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is7p 1. Safety & Warnings 2. Product Introduction 3. Wiring 4. Amplification 5. Presets & Control 6. Technical Specifications

Adamson Systems Engineering | Table of Contents Read these instructions, keep them available for reference. This manual can be downloaded from Heed all warnings and follow all instructions. A qualifi ed technician must be present during the installation and use of this product. This product is capable of producing extremely high sound pressure levels and should be used according to the specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will not be liable for damages caused by any possible misuse of this product. Servicing is required when the loudspeaker has been damaged in any way, such as when the loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not operate normally. Protect the cabling from being walked on or pinched. Read the appropriate IS-Series Rigging Manual before installing the product. Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives. Safety & Warnings ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ 3 4 5 6 7 8 In an effort to continuously improve its products, Adamson releases updated accompanying software, presets and standards for its products. Adamson reserves the right to change the specifications of its products and the content of its documents with no prior notice. Page 1 IS10p User Manual Distribution Date: March 1st, 2021 Copyright 2021 by Adamson Systems Engineering Inc.; all rights reserved This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe place and make it available upon request to any operator. Resale of this product must include a copy of this manual. This manual can be downloaded from Declarations EU Declaration of Conformity Adamson Systems Engineering declares that the products stated below are in conformance with the relevant fundamental health and safety criteria of the applicable EC Directive(s), in particular: Signed at Port Perry, ON. CA - March 1st, 2021 ------------------------------------------------ Brock Adamson (President & CEO) ADAMSON SYSTEMS ENGINEERING, Inc. 1401 Scugog Line 6, Port Perry (ON), L9L 1B2, Ontario, Canada T: +1 905 982 0520, F: +1 905 982 0609 Email: [email protected] Website: www.adamsonsystems.com IS10p User Manual Directive 2014/35/EU: Low Voltage Directive 963-0004 IS10p - 70 x 40 963-0005 IS10pb - 70 x 40 963-0006 IS10p - 100 x 50 963-0007 IS10pb - 100 x 50 Directive 2006/42/EC: Machinery Directive 934-0029 IS10p Horizontal Bracket 934-0030 IS10p Vertical Bracket 930-0031 IS7p & IS10p Fill Plate 932-0006 IS-Series Bracket C-Clamp 932-0039 IS-Series Pole Mount Adapter 932-0040 IS-Series C-Clamp 932-0041 IS-Series Point H-Clamp 932-0042 IS-Series Tilt Adapter 932-0044 IS-Series Mount Link 934-0026 IS-Series Sight Mount 934-0031 IS-Series Super Sight Mount 934-0032 IS-Series Articulator https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is10p Adamson Systems Engineering | Table of Contents Read these instructions, keep them available for reference. This manual can be downloaded from Heed all warnings and follow all instructions. A qualifi ed technician must be present during the installation and use of this product. This product is capable of producing extremely high sound pressure levels and should be used according to the specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will not be liable for damages caused by any possible misuse of this product. Servicing is required when the loudspeaker has been damaged in any way, such as when the loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not operate normally. Protect the cabling from being walked on or pinched. Read the appropriate IS-Series Rigging Manual before installing the product. Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives. Safety & Warnings ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ 3 4 5 6 7 8 In an effort to continuously improve its products, Adamson releases updated accompanying software, presets and standards for its products. Adamson reserves the right to change the specifications of its products and the content of its documents with no prior notice. Page 3 IS10p User Manual https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is10p 1. Safety & Warnings 2. Product Introduction 3. Wiring 4. Amplification 5. Presets 6. Technical Specifications Adamson Systems Engineering | Page 4 IS10p User Manual IS10p • The IS10p is a sub-compact point source enclosure designed with high output level and high clarity in mind. It has an unobtrusive visual design which blends seamlessly into the surrounding space. It contains two symmetrically arrayed 10” transducers and a 3” compression driver mounted on an Adamson waveguide. • The high frequency waveguide is rotateable in increments of 90°. The nominal dispersion pattern is 70° x 40° (HxV). A 100° x 50° high frequency waveguide is also available. • Adamson’s use of proprietary techologies such as Advanced Cone Architecture give the IS10p an extremely high maximum SPL level of 139 dB. • The nominal impedance of the IS10p is 8 Ω per band, maximizing amplifier efficiency. • The operational frequency range of the IS10p is 60Hz to 18kHz, +/- 3 dB. • The IS10p is intended to be used as either a standalone system, or a fill enclosure in tandem with other IS-Series products. The IS10p is designed to pair easily and coherently with IS-Series subwoofers. • The wooden enclosure is made of marine grade birch plywood, and has a steel rigging system mounted on each side. Without sacrificing low resonance to composite material, the IS10p is able to maintain a low weight of 21 kg / 46.3 lbs. • The IS10p is designed for use with Lab.gruppen’s D-Series line of installation amplifiers. IS10p Sub-Compact Point Source

Adamson Systems Engineering | Table of Contents Read these instructions, keep them available for reference. This manual can be downloaded from Heed all warnings and follow all instructions. A qualifi ed technician must be present during the installation and use of this product. This product is capable of producing extremely high sound pressure levels and should be used according to the specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will not be liable for damages caused by any possible misuse of this product. Servicing is required when the loudspeaker has been damaged in any way, such as when the loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not operate normally. Inspect your products regularly for any visual or functionality irregularities. Protect the cabling from being walked on or pinched. Read the appropriate IS-Series Rigging Manual before installing the product. Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives. Safety & Warnings ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ 3 4 5 6 7 8 9 In an effort to continuously improve its products, Adamson releases updated accompanying software, presets and standards for its products. Adamson reserves the right to change the specifications of its products and the content of its documents with no prior notice. Page 1 IS10 User Manual IS10n User Manual Distribution Date: May 1st, 2021 Copyright 2021 by Adamson Systems Engineering Inc.; all rights reserved This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe place and make it available upon request to any operator. Resale of this product must include a copy of this manual. This manual can be downloaded from Declarations EU Declaration of Conformity Adamson Systems Engineering declares that the products stated below are in conformance with the relevant fundamental health and safety criteria of the applicable EC Directive(s), in particular: Signed at Port Perry, ON. CA - May 1st, 2021 ------------------------------------------------ Brock Adamson (President & CEO) ADAMSON SYSTEMS ENGINEERING, Inc. 1401 Scugog Line 6, Port Perry (ON), L9L 1B2, Ontario, Canada T: +1 905 982 0520, F: +1 905 982 0609 Email: [email protected] Website: www.adamsonsystems.com Directive 2014/35/EU: Low Voltage Directive IS10n - 973-0008, 973-0009, 973-0011, 973-5008, 973-5009, 973-5011 Directive 2006/42/EC: Machinery Directive IS10 & IS119 Support Frame - 930-0028, 930-0035, 930-5028 Extended Beam - 930-0021, 930-5021 Moving Point Extended Beam - 930-0033, 930-5033 IS10 Micro Frame - 930-0030, 930-5030 Line Array H-Clamp - 932-0037 https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is10n Adamson Systems Engineering | Table of Contents Read these instructions, keep them available for reference. This manual can be downloaded from Heed all warnings and follow all instructions. A qualifi ed technician must be present during the installation and use of this product. This product is capable of producing extremely high sound pressure levels and should be used according to the specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will not be liable for damages caused by any possible misuse of this product. Servicing is required when the loudspeaker has been damaged in any way, such as when the loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not operate normally. Inspect your products regularly for any visual or functionality irregularities. Protect the cabling from being walked on or pinched. Read the appropriate IS-Series Rigging Manual before installing the product. Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives. Safety & Warnings ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ ______________________________________________________________________________________ 3 4 5 6 7 8 9 In an effort to continuously improve its products, Adamson releases updated accompanying software, presets and standards for its products. Adamson reserves the right to change the specifications of its products and the content of its documents with no prior notice. Page 3 IS10 User Manual https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is10n 1. Safety & Warnings 2. Product Introduction 3. Wiring 4. Amplification 5. Presets & Control 6. Weatherized 7. Technical Specifications Page 3 IS10 User Manual Adamson Systems Engineering | Page 4 IS10n User Manual IS10n • The IS10n is a sub-compact line array enclosure designed for extended throw capabilities. It contains two symmetrically arrayed 10” transducers and a 4” compression driver mounted on an Adamson sound chamber. The high frequency sound chamber is designed to couple multiple cabinets across the entire intended frequency band without loss of coherence. • The operational frequency range of the IS10n is 60 Hz to 18 kHz. The use of proprietary technologies such as Controlled Summation Technology and Advanced Core Architecture allow high maximum SPL and maintains a consistent nominal horizontal dispersion pattern of 80° down to 400 Hz. • The enclosure has an unobtrusive visual design which blends seamlessly into the surrounding space, is made of marine grade birch plywood, and has a four-point rigging system. Without sacrificing low resonance to composite material, the IS10n is able to maintain a low weight of 25.6 kg / 56.5 lbs. • Up to twenty IS10n can be flown in the same array when using the IS10 & IS119 Support Frame and up to 4 when using the IS10 Micro Frame. Nine rigging positions are available allowing vertical inter-cabinet splay angles from 0° to 10°. Always consult Blueprint AV™ and the IS-Series Line Array Rigging Manual for correct rigging positions (including ground stacking options) and installation procedures. • The IS10n is intended to be used as a standalone system or with the IS119 companion subwoofer, which brings the usable frequency range down to 30 Hz. The IS10n can also be paired with other IS-Series subwoofers. • The IS10n is designed for use with Lab.gruppen’s D-Series line of installation amplifiers. The nominal impedance of the IS10n is 8 Ω per band, maximizing amplifier efficiency. IS10n Sub Compact Line Array