ADTRAN 6541 Manuals

installation guide SHDSL 2-Wire/4-Wire NTU Product Series Installation and Maintenance Guide Document Number: 61230001E1-5E July 2015 SHDSL 2-Wire/4-Wire NTU Product Series Installation and Maintenance Guide ii 61230001E1-5E Front Matter Trademarks Any brand names and product names included in this document are trademarks, registered trademarks, or trade names of their respective holders. To the Holder of this Document The contents of this document are current as of the date of publication. ADTRAN® reserves the right to change the contents without prior notice. In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses even if ADTRAN has been advised thereof as a result of issue of this documen About this Document This document provides instructions for the installation and maintenance of the SHDSL 2- Wire/4-Wire NTU Product Series. The intended audience for this information is the craft- person responsible for the installation and maintenance of the equipment. These instructions assume familiarity with the intended use of the equipment, basic required installation skills, and knowledge of local and accepted safety practices. Additionally, this document provides provisioning information specific to the User Interface of the SHDSL 2-Wire/4-Wire NTU Product Series. The intended audience for this information is system management personnel responsible for the configuration of the software applica- tions. User Interface provisioning assumes familiarity with the intended use of the equipment, concepts peculiar to this product, and a computer operations skill set. Related information can be obtained by referring to the applicable Component and System level documentation. . 901 Explorer Boulevard P.O. Box 140000 Huntsville, AL 35814-4000 (256) 963-8000 ©2015 ADTRAN, Inc. All Rights Reserved. ® 61230001E1-5E iii Revision History Conventions The following typographical conventions are used in this document: This font indicates a cross-reference link. This font indicates references to other documentation and is also used for emphasis. This font is used for strong emphasis. This font indicates a System Response (on-screen messages and prompts). This font indicates System Input (text to be typed exactly as shown). This Font indicates screen menu items, fields and parameters. THIS FONT indicates keyboard keys (ENTER, ESC, ALT). Keys that are to be pressed simulta- neously are shown with a plus sign (ALT + X indicates that the ALT key and X key should be pressed at the same time). THIS FONT indicates silk-screen labels or other system label items. Revision Date Description B May 2006 Initial revision created from 61230001L1-5B to add RoHS Directive 2002/95/EC compliance C December 2006 Revise to include TSCAN features D September 2011 Revise Safety and Regulatory Compliance content E July 2015 Remove RoHS Directive 2002/95/EC compliance information.

SHDSL 2-Wire/4-Wire NTU Product Series Installation and Maintenance Practice Document Number: 61230001L1-5C December 2006 ® SHDSL 2-Wire/4-Wire NTU Product Series Installation and Maintenance Practice ii 61230001L1-5C Front Matter Trademarks Any brand names and product names included in this document are trademarks, registered trademarks, or trade names of their respective holders. To the Holder of this Document The contents of this document are current as of the date of publication. ADTRAN® reserves the right to change the contents without prior notice. In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses even if ADTRAN has been advised thereof as a result of issue of this document. 901 Explorer Boulevard P.O. Box 140000 Huntsville, AL 35814-4000 (256) 963-8000 ©2006 ADTRAN, Inc. All Rights Reserved. ® 61230001L1-5C iii Revision History Conventions The following typographical conventions are used in this document: This font indicates a cross-reference link. This font indicates screen menus, fields, and parameters. THIS FONT indicates keyboard keys (ENTER, ESC, ALT). Keys that are to be pressed simultaneously are shown with a plus sign (ALT+X indicates that the ALT key and X key should be pressed at the same time). This font indicates references to other documentation and is also used for emphasis. This font indicates on-screen messages and prompts. This font indicates text to be typed exactly as shown. This font indicates silk-screen labels or other system label items. This font is used for strong emphasis. NOTE Notes inform the user of additional, but essential, information or features. CAUTION Cautions inform the user of potential damage, malfunction, or disruption to equipment, software, or environment. WARNING Warnings inform the user of potential bodily pain, injury, or death. Revision Date Description A August 2003 Initial release B June 2004 Revise to include feature modifications C December 2006 Revise to include TSCAN feature, Firmware System Release v1.68

SHDSL 2-Wire/4-Wire LTU Installation and Maintenance Practice Document Number: 61230011L1-5B December 2006 ® SHDSL 2-Wire/4-Wire NTU Product Series Installation and Maintenance Practice ii 61230011L1-5B Front Matter Trademarks Any brand names and product names included in this document are trademarks, registered trademarks, or trade names of their respective holders. To the Holder of this Document The contents of this document are current as of the date of publication. ADTRAN® reserves the right to change the contents without prior notice. In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses even if ADTRAN has been advised thereof as a result of issue of this document. 901 Explorer Boulevard P.O. Box 140000 Huntsville, AL 35814-4000 (256) 963-8000 ©2006 ADTRAN, Inc. All Rights Reserved. ® 61230011L1-5B iii Revision History Conventions The following typographical conventions are used in this document: This font indicates a cross-reference link. This font indicates screen menus, fields, and parameters. THIS FONT indicates keyboard keys (ENTER, ESC, ALT). Keys that are to be pressed simultaneously are shown with a plus sign (ALT+X indicates that the ALT key and X key should be pressed at the same time). This font indicates references to other documentation and is also used for emphasis. This font indicates on-screen messages and prompts. This font indicates text to be typed exactly as shown. This font indicates silk-screen labels or other system label items. This font is used for strong emphasis. NOTE Notes inform the user of additional, but essential, information or features. CAUTION Cautions inform the user of potential damage, malfunction, or disruption to equipment, software, or environment. WARNING Warnings inform the user of potential bodily pain, injury, or death. Revision Date Description A May 2005 Initial release B December 2006 Revise to include TSCAN feature, Firmware System Release v1.68 SHDSL 2-Wire/4-Wire NTU Product Series Installation and Maintenance Practice iv 61230011L1-5B Training ADTRAN offers training courses on our products. These courses include overviews on product features and functions while covering applications of ADTRAN product lines. ADTRAN provides a variety of training options, including customized training and courses taught at our facilities or at customer sites. For inquiries concerning training, contact ADTRAN: Training Phone: 800-615-1176, ext. 7500 Training Fax: 256-963-6700 Training Email: [email protected]