Air King AK927 Manuals

READ AND SAVE THESE INSTRUCTIONS READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. GENERAL SAFETY INFORMATION When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to person, including the following: 1. Read all instructions before installing or using exhaust fan. 2. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer. 3. Before servicing or cleaning the unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. 4. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-related construction. 5. Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA) and the American Society for Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE), and the local code authorities. CAUTION: FOR GENERAL VENTILATING USE ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS AND VAPORS. Models: AK917, AK927 www.airkinglimited.com 210575917 Rev. A 1-06 Bulb Heat Lamp with Fan SAVE THESE INSTRUCTIONS 6. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities. 7. Ducted fans must always be vented to the outdoors. 8. This unit must be grounded. 9. To avoid motor bearing damage and noisy and/or unbalanced impellers, keep drywall spray, construction dust, etc. off power unit. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, DO NOT USE THIS FAN WITH ANY SOLID-STATE SPEED CONTROL DEVICE. WARNING: DO NOT INSTALL OVER A TUB OR MOUNT IN A SHOWER STALL ENCLOSURE. 10. Do not install into a ceiling thermally insulated to a value greater than R-40. 11. NEVER place a switch where it can be reached from a tub or shower. WARNING: DO NOT USE IN KITCHENS. WARNING: THIS UNIT IS DESIGNED AND TESTED TO BE A SUPPLEMENTAL HEATER FOR USE WITH A TIMER OR A SWITCH. IT IS NOT INTENDED TO BE USED AS THE PRIMARY SOURCE OF HEAT AND CONTROLLED BY A THERMOSTAT. IMPORTANT INSTRUCTIONS - OPERATING MANUAL 1 of 8

IMPORTANT INSTRUCTIONS - OPERATING MANUAL READ AND SAVE THESE INSTRUCTIONS READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. GENERAL SAFETY INFORMATION When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to person, including the following: SAVE THESE INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSON, OBSERVE THE FOLLOWING: a) Use this unit only in the manner intended by the manufacturer.If you have questions, contact the manufacturer. b) Before servicing or cleaning the unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSON, OBSERVE THE FOLLOWING: a) Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-related construction. b) Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA) and the American Society for Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE), and the local code authorities. c) When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities. CAUTION: FOR GENERAL VENTILATING USE ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS AND VAPORS. d) Ducted fans must always be vented to the outdoors. e) This unit must be grounded. f) To avoid motor bearing damage and noisy and/or unbalanced impellers, keep drywall spray, construction dust, etc. off power unit. g) Read all instructions before installing or using exhaust fan. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, DO NOT USE THIS FAN WITH ANY SOLID-STATE SPEED CONTROL DEVICE. WARNING: DO NOT INSTALL OVER A TUB OR MOUNT IN A SHOWER STALL ENCLOSURE. a) Do not install into a ceiling thermally insulated to a value greater than R-40. b) NEVER place a switch where it can be reached from a tub or shower. WARNING: DO NOT USE IN KITCHENS. WARNING: THIS UNIT IS DESIGNED AND TESTED TO BE A SUPPLEMENTAL HEATER FOR USE WITH A TIMER OR A SWITCH. IT IS NOT INTENDED TO BE USED AS THE PRIMARY SOURCE OF HEAT AND CONTROLLED BY A THERMOSTAT. www.airkinglimited.com 210575917 Rev. C 1-11 1 of 8 Bulb Heat Lamp with Fan Models: AK917, AK927

SPECIFICATIONS HEATER WITH EXHAUST FAN AK927 Specifications subject to change without notice. C US • Grill White, polymeric grill (flame retardant ABS UL rated 94-5V) secured in place with torsion springs; easily removed if neccessary, dimensions - 161/2" x 10". • Blower Wheel One piece polymeric wheel, 3 7/8" diameter, 21/2" wide with 21 fins. • Motor Heavy duty, plug in 2 pole motor. Life time lubrication, thermally protected. Rated 120 volts, 60 hz., 0.90 amps. • Fan Housing 23 gauge galvanized steel housing. Dimensions 137/8" x 8" x 5 7/8". • Duct Collar Plastic collar for 4" duct connection, comes complete with built in non-metallic back draft damper for quiet operation. • Ventilating Area For bathrooms up to 70 sq. ft. • Lamping Information 2 - 250 watt maximum, type R40 bulb, medium base, 850 Btu. with shaped aluminum socket housing with porcelain socket. (lamp not included) • Unit Mounting The housing will mount in ceilings with at least 6" of clearance and through drywall thickness up to 3/4", with a rough-in opening of 137/8" x 8". Rated for ceilings insulated to R-40. The housing will mount between 16" on center joists, using the 4 supplied housing mounting rails. • Single Pack Shipping Info Box Dim: 18" x 111/2" x 73/4" UPC: 0-8316227011-5 Shipping Weight: 9 lbs. PERFORMANCE HVI Sones Fan Speed Power Static Pressure (inches of w.g.) @ .1 SP RPM Watts 0 0.05 0.1 0.125 0.15 0.2 0.25 0.3 Air Flow - CFM CUL/HVI - TYPE IC RATED PROJECT LOCATION CONTRACTOR ARCHITECT ENGINEER SUBMITTED BY DATE FAN MODEL CFM IN RPM WATTS AMPS SONES QTY OPTIONAL EQUIPMENT NUMBER NUMBER W.G. & REMARKS 57/8" 4" 137/8" 10" 161/2" 8" Updated 1-11 U.S.: 820 Lincoln Avenue West Chester, Pennsylvania 19380-4466 Tel: (610) 692-7400 • 877-304-3785 Fax: (610) 696-8048 Canada: 8 Edvac Drive Brampton, Ontario L6S 5P2 Tel: (905) 456-2033 Fax: (905) 456-1015 70 CFM/3.5 Sones @ 0.10" SP., 120 Volts, 4.6 amps, 60 hz.

Exhaust Fans Deluxe Quiet Fans Deluxe Quiet Fans w/Light Quiet Fans Quiet Fans w/Light Deluxe Round Fans w/Light Decorative Round Fans w/Light Decorative Oak Fans w/Light Fans with Light High Performance Fans Advantage Fans Through the Wall Fan Deluxe Heaters Advantage Heaters Bulb Heaters The Advantage 3" and 4" Duct Series Exhaust Fans provide economical ventilation for bathrooms, utility rooms and other areas needing ventilation. • Large keyhole slots on models AS50, AS60, and AS70. Models AS90 and AS120 include adjustable hanging brackets for mounting to joist on 16" centers. • AS50, AS60, and AS70 feature a slim 33/4" housing, allowing installation into either ceiling or wall applications. • UL listed for installation over a tub or shower on a GFCI circuit. United States: 820 Lincoln Avenue • West Chester, PA 19380 • 877-304-3785 Canada: 110 Glidden Road • Brampton, ON L6T-2J3 • 800-250-8767 The Deluxe Combination Heater Series will instantly make your home a more comfortable place to live. • 1500 watts providing 5120 BTUs of heat. • Includes adjustable hanging brackets for mounting to joist on 16" centers or large keyhole slots. • Wall control switches included with the unit. • Units with light feature a moonstone glass lens with 100 watt maximum light and 7 watt night light (Bulbs not included). • Energy Efficient Fluorescent model AKF965. • 4" Exhaust duct connection. The Advantage Combination Heater Series provides an economical solution to adding supplemental warmth. • Includes the features of the Deluxe Heater Series, except the night light and control switches • Energy Efficient Fluorescent model AKF55. The Bulb Heater Series provides instant supplemental heat where it is needed the most. • Uses one or two 250 watt maximum R-40 infrared bulbs (Not included). • Includes adjustable hanging brackets for mounting to joist on 16" centers or large keyhole slots. • 4" Exhaust duct connection What is a Sone? - The sone is an internationally recognized unit of loudness, which simplifies reporting of sound output. The sones translate laboratory decibel readings into numbers that correspond to the way people sense loudness. Double the sone is double the loudness. In everyday terms, one sone is equivalent to the sound of a quiet refrigerator in a quiet kitchen. CFM - Cubit Feet per Minute. A measurement of how much air flows during a one minute period. www.airkinglimited.com Rev. D 10/06 Advantage Exhaust Fans Model CFM Sones Duct Size AS50 50 3.0 3" AS60 60 3.5 3" AS70 70 5.0 3" AS90 90 2.5 4" AS120 120 4.0 4" Models AS50, AS60, AS70 Models AS90, AS120 Deluxe Heaters Model Features CFM Sones AK965L Heat/Vent/Light/Night Light 70 3.5 AKF965 Heat/Vent/Light/Night Light 70 3.5 AK960 Heat/Light/Night Light N/A N/A AK905 Heat/Vent 70 3.5 AK093L Heat/Vent/Light/Night Light 70 3.5 The Through the Wall Exhaust Fan Series adds versatility to your ventilation needs. • Vent directly to the outside. • All metal housing installs into walls from 4" to 9" thick. • Spring loaded aluminum backdraft damper. • 8" round diameter housing for maximum air flow. Through the Wall Exhaust Fan Model CFM Sones Duct Size EWF-180 180 3.0 8" Advantage Heaters Bulb Heaters Model Features CFM Sones AK55L Heat/Vent/Light 70 3.5 AKF55 Heat/Vent/Light 70 3.5 Model Features CFM Sones AK912 Single Bulb Heat N/A N/A AK917 Single Bulb Heat/Fan 70 3.5 AK922 Double Bulb Heat N/A N/A AK927 Double Bulb Heat/Fan 70 3.5 Models AK922, AK927 Models AK912, AK917 C US