AIRBLAST 1070 PNE Manuals

OPERATOR’S MANUAL AIRBLAST 1070 PNE VACUUM BLASTING MACHINE NOTICE This user’s manual describes how to handle and operate the subject machine(s) to ensure safe operation, optimum work economy and long service life. Read this book before putting the machine into operation to ensure correct handling, operation and proper maintenance from the beginning. Keep this book available for the operator(s) and make sure that the unit is operated and maintained according to the instructions. In all correspondence always mention the unit type and the complete serial number shown on the data plate. The owner is responsible to keep the machine(s) in a safe operating condition. If any statement in this book especially with regard to safety does not comply with local legislation, the stricter of the two shall apply. The author disclaims any responsibility from the use or misuse of information contained in this publication. Copyright 2012 By AIRBLAST BV All rights reserved This Handbook or any parts thereof may not be reproduced in any form without the written consent of the copyright owners. USER MANUAL VACUUM BLASTING MACHINE 1070 PNE AB Revision 1 January 2012 page 0.0 Table of contents page 1. Introduction 1.1 2. Responsibilities of owner and personnel 2.1 3. Safety 3.1 3.1 Safety precautions 3.1 3.2 Safety provisions 3.4 3.3 Warning/ caution Information 3.5 4. Technical data 4.1 5. Parts list 5.1 6. Transport 6.1 7. Machine function 7.1 8. Setting up for operation 8.1 8.1 Installation instructions 8.1 8.2 Operation instructions 8.2 8.3 Adjustment 8.2 8.3.1 Setting the pressure 8.2 8.3.2 Adjustment of the abrasive control valve 8.3 9. Operation of the machine 9.1 9.1 Inspection procedure before starting up 9.1 9.2 Operation instructions 9.1 9.3 Taking the machine out of operation 9.3 10. Maintenance 10.1 11. Trouble shooting 11.1 12. Parts 12.1 13. Pneumatic diagram 13.1 USER MANUAL VACUUM BLASTING MACHINE 1070 PNE AIRBLAST Revision 1 January 2012 page 1.1 1. Introduction The AIRBLAST's Vacuum Blasting technology is a new concept for cleaning many types of surfaces quickly, thoroughly and without environmental pollution. The AIRBLAST 1070 PNE machine is designed as a high capacity direct pressure-blasting machine featuring a continuous blast media feed system. This feature allows the machine to be kept compact and lightweight but with a minimum down time for media loading and machine handling. During the blast operations, the dust and debris are separated from the re-usable abrasive for simple disposal. Only the cleaned blast media recycles to provide optimal surface prepa- ration.