ALIBI ALI-BC1720LPC Manuals

1 www.observint.com ALI-BC1720LPC_CQ 12/8/15 Mounting base Mounting screw holes Camera underside - mounting base Optional ALI-AB4 mounting bracket for ALI-BC1720LPC camera (includes mounting fasteners) What’s in the box • Camera assembly • This installation and user guide TOOLS YOU NEED To install the camera, you will need: • 12 Vdc power source. See Specifications for power requirement. • Compatible mounting bracket with tools and fasteners for mounting the camera • Video and power extension cables • CCTV video setup monitor (optional) INSTALLATION Before installation: • Make sure that the device is in good condition and all the assembly parts are included. • Check the specification of the products for the installation environment. • Make sure that the wall or the ceiling is strong enough to withstand 3 times the weight of the camera and mounting bracket. • To avoid fire or shock hazard, use only UL listed power supplies. Verify that the power supply will provide the rated voltage and wattage for the camera. See the Specifications section. During installation: • Camera Lens: Handle the camera carefully to prevent scratching or soiling the lens. If the lens or LED array shield becomes soiled, clean it only with mild glass cleaner. • Monitor impedance: Set the CVBS monitor impedance switch to 75 Ω. • Camera drop cable: The camera drop cable includes two connectors: — Video BNC connectors: For transmission of the video signal across a coax (75 Ω) extension cable. BNC connectors are labeled for the signal type. Connect the TVI drop cable to an HD-TVI hybrid video recorder interface, and the CVBS drop cable to an NTSC monitor or a CVBS recorder video input. — Power connector: When applying 12 Vdc power, observe the power polarity. The polarity is marked on the connector. ALI-BC1720LPC 720P HD-TVI License Plate Camera Quick Installation and User Guide The ALI-BC1720LPC License Plate Camera feature a progressive scan 720p sensor that delivers HD-TVI high- definition video resolution over RG59 coax or any standard analog CCTV cabling. This HD video camera is ideal for license plate recognition. NOTE: This camera does not include a mounting bracket. Contact your vendor for bracket options. Features • 1.27 megapixel progressive scan sensor provides 720P resolution • HD-TVI and CVBS video output • 6 ~ 22 mm motorized zoom lens with motorized focus • 0.001 Lux ultra-low light rating • 0 lux with white light LEDs • UTC Up the Coax Control • IP66 rated housing White light LEDs (6) Motorized Lens Sun shield Photosensor Drop cable Mount point Camera back 12 Vdc power connector HD-TVI video BNC connector* CVBS video BNC connector* Camera drop cable connectors * Drop cable BNC connectors are labeled for TVI (HD-TVI) or CVBS.