ALIBI ALI-NVR5100P Series Manuals

1 ALI-NVR51xxP_SQ 10/5/15 Item Description ON / OFF Switch Switch for powering the device on or off. GROUND Terminal for ground. Connect to earth ground before powering on the NVR. LAN Interface 10/100/1000BASE-T Ethernet network interface USB interface Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard Disk Drive (HDD). AUDIO OUT CVBS AUDIO OUT - BNC connector for audio output. This connector is synchronized with CVBS video output VGA AUDIO OUT - BNC connector for audio output. This connector is synchronized with VGA video output Internal Ethernet switch ports 16 ports for IP cameras. These ports provide Power over Ethernet (PoE) to the cameras. RS-485, ALARMS IN/OUT RS-485, Alarm IN / OUT terminations Item Description SW ON RS-485 termination switch: Up position is not terminated. Down position is terminated with 120 Ω resister. RS-485 (T+, T-, R+. R-) T+ and T- pins connect to R+ and R- pins of PTZ receiver respectively. KB Controller port: D+, D- pin connects to Ta, Tb pin of controller. For cascading devices, the first NVR’s D+, D- pin should be connected with the D+, D- pin of the next NVR ALARM IN (1 through 16) Alarm inputs 1 - 16. Alarm input is tied to ground through the alarm sensor. ALARM OUT (1-G through 4-G) Alarm outputs 1 - 4 with ground terminations. Mouse Control A standard 3-button (left/right/scroll-wheel) USB mouse can also be used with this NVR. To use a USB mouse: 1. Plug USB mouse into the either the front panel or backpanel USB connector of the NVR. 2. The mouse will be automatically detected. If the mouse is not detected, the mouse may not be compatible with the NVR. Please refer to the recommended device list from your provider. This quick setup guide provides instructions to initially setup and use the ALI-NVR5116P and ALI-NVR5132P network video recorders (NVRs). For additional information on the extensive capabilities of your NVR, refer to the ALI-NVR5100P Series Embedded Network Video Recorder User Manual provided electronically with your system. NVR Front Panel Status indicators USB ports (2) Item Function / Description Status Indicators POWER Indicator is green when the unit is powered on. When the unit is off, the LED is red if power is available. HDD HDD indicator blinks red when data is being read from or written to an HDD. TX/RX Blinks green when the network connection is functioning normally. USB Interfaces Universal Serial Bus (USB) ports for additional USB devices such as a mouse or Hard Disk Drive (HDD). NVR Backpanel Camera Channels (POE) LAN RS-485, Alarms IN / OUT Power connector Fan outlet ON / OFF switch Monitor Out (HDMI, VGA, CVBS) Audio OUT Ground eSata RS-232 USB Item Description eSATA Connects external SATA HDD, CD/DVD-RW. RS-232 Interface DB9 (male) connector for RS-232 devices VIDEO OUT (CVBS, VGA, HDMI) CVBS - BNC connector for video output VGA - DB15 connector for VGA compatible monitor. Supports 1920 × 1080p @ 60 Hz, 1600 × 1200 @ 60 Hz, 1280 × 1024 @ 60 Hz, 1280 × 720 @ 60 Hz/, 1024 × 768 @ 60 Hz HDMI - HDMI connector for an HDMI compatible monitor. Supports 1920 × 1080p @ 60 Hz, 1600 × 1200 @ 60 Hz, 1280 × 1024 @ 60 Hz, 1280 × 720 @ 60 Hz/, 1024 × 768 @ 60 Hz LINE IN BNC connector for audio input. RS-485, ALARMS IN/OUT See below. AC 100V ~ 240V AC 100 V ~ 240 V power supply. ALI-NVR5100P Series Embedded Network Video Recorder Quick Setup Guide

ALI-NVR5100P Series Embedded Network Video Recorder User Manual Products: ALI-NVR5116P, ALI-NVR5132P ALI-NVR5100P Series Network Video Recorder PLEASE READ THIS MANUAL BEFORE USING YOUR SYSTEM, and always follow the instructions for safety and proper use. Save this manual for future reference. ALI-NVR5116P_SM 10/5/15