Alpha Dickson KT6P1 Manuals
1 pdf manual(s) Alpha Dickson KT6P1 for free download (Document Types: Quick start)
Alpha Dickson KT6P1 Quick start [PDF] (5 pages)
- Identifier: id-1858784
- Brand: Alpha
- Device: Dickson KT6P1 Measuring Instruments
- Type: PDF
- Key Aspects: Unpacking and Inspection Guidelines, System Architecture and Design Overview, Periodic Inspection Checklists
- UPD Date: 31.07.2026
- Source File: 1863978.pdf
- Pages: 5
- Description: Product usage guide for the Alpha Dickson KT6P1.
Click to expand and read text
Phone: 1-800-757-3747 or 1-630-543-3747 | Fax: 1-630-543-0498 | Email: [email protected] | Website:DicksonDate.com KT6P1, KT6P2, KT6P5 6” (152mm) Temperature Chart Recorder Quick Start 1. Remove the protective pen cap. 2. Connect Probe: Make sure the KTC probe is connected firmly to the Replaceable Sensor and that the Replaceable Sensor is plugged in firmly to the chart recorder. 3. Insert 4 AA batteries and plug in AC adapter. Unit will power on. 4. The instrument will move pen to the appropriate readings. 5. Install the chart that matches the Dip Switch settings you have selected. a. Press the PEN HOME key to move the pen to the outside of the chart. The pen is automatically raised off the chart. b. Remove the old chart, place the new chart on the Chart Hub being certain that the edge of the chart slides under the Chart Guide Clip located at the outside of the chart. 6. Set the appropriate time. There are two ways to adjust the chart and set the appropriate time: a. Set the chart time manually by inserting a coin into the groove in the chart hub and turning clockwise until the correct hour (and day if applicable) on the chart is referenced to the timing arrow (just to the right of the pen tip on the dial). Press Pen Home to move the pen(s) back onto the chart. The following feature should be used for fine adjustments only: b. To adjust the chart time, press and hold Adjust-Up and Adjust-Down buttons located on the back of the unit next to the dip switch. The green LED will blink rapidly for about five seconds, then the LED will remain solid green. While in this state the Adjust-Up button will move the chart backward (counter clockwise) and the Adjust-Down button will move the chart forward (clockwise). Rotate the chart until the correct hour (and day if applicable) on the chart is referenced to the timing arrow. Once you have set your chart, press the Pen Home button to exit Chart Adjust Mode. The unit will take one minute to exit the Chart Adjust Mode once Pen Home is pressed. Press Pen Home to move the pen(s) back onto the chart. 7. Place the KT6 recorder on a flat vibration-free surface. Be sure it is in a vertical position and level. For best performance and longevity, the location should be a clean environment, free from dust and corrosive fumes. Do not exceed temperature specifications. Wall Mount: Keyhole slots are provided on the KT6 recorder for wall mounting.
Dickson KT6P1: Related Instructions
Installation and Servicing Instructions Alpha SolarSmart 150 Pre-Heat Drain Back Solar System and Unvented Hot Water Solar Cylinder for use with an Alpha Combin General instruction manual for the Alpha SolarSmart 150 Water System. It explains configuration options and device features, installation procedures, system configuration.
Quick start guide for the Alpha WMP-ND02 Network Card. The manual elaborates on features and error codes, supported accessories, functional overview.
Professional manual for the Alpha WCB-G03A1 Adapter. The document details configuration and software installation, installation, daily usage, network configuration.
70 April 2007 PRODUCT REVIEW Reviewed by Norm Fusaro, W3IZ Assistant Manager, Membership and Volunteer Programs Department The Alpha 8100 is the latest manual- Instruction and usage manual for the Alpha 8100 Amplifier. It describes usage and network configuration, product handling, diagnostic information.
User's Instructions Alpha 240X G.C. No. 47 532 13 Service Listed 0051 Alpha 240X Wall Mounted, Fan Assisted, Room Sealed, Gas Fired Combination Boiler For use w Full operation manual for the Alpha Alpha 240X Boiler. The manual describes installation guides, installation, power requirements, error handling.
Product manual for the Alpha Ecoguard Type W Power Tool. This guide explains the features and shutdown procedures, operating guidelines, error codes, software installation.
Similar Manuals in the Measuring Instruments Category
LIGHT FUNCTION POWER SETL MAX READING Introduction The DT-45SNL is Digatron’s small, easy to use, digital engine monitoring system. This instrument was design Practical operating guide for the Digatron DT-45SNL Measuring Instruments. The manual provides technical details on operating instructions, technical specifications, device operation tips, technical assistance.
® 1735 Power Logger Users Manual March 2006 Rev. 2, 3/10 © 2006-2010 Fluke Corporation, All rights reserved. Specifications are subject to change without noti Technical reference manual for the Fluke 1735 Other. This guide presents instructions on firmware installation, operating modes, assembly reference.
AN092 Getting Started 36 Thornwood Dr. — Ithaca, NY 14850 USA Tel: 607-257-1080 — Fax: 607-257-1146 www.kionix.com — [email protected] © Kionix 2019 All Ri Device maintenance guide for the Rohm Kionix KX132 Measuring Instruments. This manual elaborates on specifications, operating modes, hardware components.
Bruksanvisning för fuktmätare Bruksanvisning for fuktmåler Instrukcja obsługi wilgotnościomierza Operating Instructions for Moisture Meter 405-044 SV Bruks Instruction and reference manual for the Meec tools MD-2G Measuring Instruments. It offers details on hardware instructions, service procedures, technical guidelines.