Altronix NetWayXT Manuals

More than just power.TM Rev. 042409 I.T.E. 43KC Repeater Modules Models Include: NetWayXT - IEEE 802.3af (15W) Compliant Repeater Module NetWayXTX - IEEE 802.3af (15W) and IEEE 802.3at (30W) Compliant Repeater Module NetWayXTG (UL evaluation pending) - 1Gb IEEE 802.3af (15W) and IEEE 802.3at (30W) Compliant Repeater Module Installation Guide all-guide s.com

Rev. 042409 ® Installation Guide NetWayXT/NetWayXTX Repeater Overview: Altronix NetWayXT (IEEE 802.3af (15W) compliant) and NetWayXTX (IEEE 802.3af (15W) and IEEE 802.3at (30W) compliant) repeater modules interface with NetWay midspans to extend data (video) for an additional 100m. A maximum range of 600m for NetWayXT and even longer for NetWayXTX is possible using multiple repeaters, based on camera/device port power requirement. Features: • UL/CUL Listed for Information Technology Equipment (UL 60950-1). • CE approved. • Repeater module extends range 100m each. • Port status LEDs. • Compact insulated housing. • Plug-and-play installation. • Auto detection and protection of legacy non-PoE cameras. • No external power required. • Compatible with NetWay1/NetWay8/ NetWay8M/NetWay16 and NetWay16M. Installation Instructions: NetWayXT/NetWayXTX is not intended to be connected to outside plant leads. 1. Mount NetWayXT/NetWayXTX in desired location utilizing the mounting hole (Fig. 1a, pg. 1, Fig. 2a, pg. 2). Use a proper fastener and/or wall anchor when securing NetWayXT to the wall. 2. Connect structured cable from port marked [OUT] on NetWay1/NetWay8/NetWay8M/NetWay16 or NetWay16M to port marked [IN] on the NetWayXT/NetWayXTX (Fig. 1b, pg. 1, Fig. 2b, pg. 2). 3. Connect structured cable from port marked [OUT] on NetWayXT/NetWayXTX to the PoE camera/ device or next NetWayXT/NetWayXTX repeater (Fig. 1b, pg. 1, Fig. 2b, pg. 2, Figs. 3-4, pg. 2). 4. Port status LEDs will illuminate on NetWayXT indicating the port is operational (Fig. 1b, pg. 1, refer to Port LED definitions on pg. 1). 5. Power LED will illuminate indicating 12VDC output (Fig. 1b, pg. 1). Port LED definitions for NetWayXT repeater: Status Green LED Yellow LED OFF Indicates it is connected as 10Base-T or no link. Indicates no link. ON Indicates it is connected as 100Base-TX. Indicates a link. Blinking --------------------------- Indicates activity. NetWayXT Fig. 1 next NetWayXT Fig. 1a Fig. 1a NetwayXT Repeater IN OUT Power Power LED Structured Cable from NetWay1, NetWay8, NetWay8M, NetWay16, NetWay16M or last NetWayXT Structured Device or Cable to PoE Camera/ LEDs Port Status www.altronix.com I.T.E. 43KC NetWayXTX Available from A1 Security Cameras www.a1securitycameras.com email: [email protected] - 1 ­

NetWayXT - 1 - Overview: Altronix NetWayXT repeater modules interface with NetWay midspans to extend data (video) an additional­ 100m (328 ft.). A maximum range of 600m (1968 ft.) is possible using multiple repeaters, based on camera/device port requirement. Specifica­tions: ­Installation Instructions: NetWayXT is not intended to be connected to outside plant leads. 1. Mount NetWayXT in desired location utilizing the mounting hole (Fig. 1a, pg. 1). Use a proper fastener and/or wall anchor when securing NetWayXT to the wall. 2. Connect structured cable from port marked [OUT] on NetWay1/NetWay8/NetWay8M/NetWay16 or NetWay16M to port marked [IN] on the NetWayXT (Fig. 1b, pg. 1). 3. Connect structured cable from port marked [OUT] on NetWayXT to the PoE camera/device or next NetWayXT repeater (Fig. 1b, pg. 1, Figs. 2-4, pg. 2­). 4. Port status LEDs will illuminate on NetWayXT indicating the port is operational (Fig. 1b, pg. 1, refer to Port LED definitions on pg. 1). 5. Power LED will illuminate indicating 12VDC output (Fig. 1b, pg. 1). Port LED definitions for NetWayXT repeater:­ Status Green LED Yellow LED OFF Indicates it is connected as 10Base-T or no link. Indicates no link. ON Indicates it is connected as 100Base-TX. Indicates a link. Blinking ------- Indicates activity. Fig. 1 Fig. 1a Fig. 1b • UL/CUL Listed for Information Technology Equipment (UL 60950-1). • CE approved. • Repeater module extends range 100m (328 ft.) each. • Port status LEDs. • Compact insulated housing. • Plug-and-play installation. • Auto detection and protection of legacy non-PoE cameras. • No external power required. • Compatible with NetWay1/NetWay8/NetWay8M/ NetWay16 and NetWay16M. NetwayXT Repeater IN OUT Power Power LED Structured Cable from NetWay1, NetWay8, NetWay8M, NetWay16, NetWay16M or last NetWayXT Structured Cable to PoE Camera/ Device or next NetWayXT Port Staus LEDs www.altronix.com I.T.E. 43KC NetWayXT - Repeater ® Rev. 042409

NetWayXT - 1 - Overview: Altronix NetWayXT repeater modules interface with NetWay midspans to extend power and data (video) an additional 100m (328 ft.). A maximum range of 600m (1968 ft.) is possible using multiple repeaters, based on camera/device port requirement. Installation Instructions: NetWayXT is not intended to be connected to outside plant leads. 1. Mount NetWayXT in desired location utilizing the mounting hole (Fig. 1a, pg. 1). Use a proper fastener and/or wall anchor when securing NetWayXT to the wall. 2. Connect structured cable from port marked [OUT] on NetWay1/NetWay8/NetWay16 to port marked [IN] on the NetWayXT (Fig. 1b, pg. 1). 3. Connect structured cable from port marked [OUT] on NetWayXT to the PoE camera/device or next NetWayXT repeater (Fig. 1b, pg. 1, Fig. 4 and 5, pg. 2). 4. Port status LEDs will illuminate on NetWayXT indicating the port is operational (Fig. 1b, pg. 1, refer to Port LED definitions on pg. 1). 5. Power LED will illuminate indicating 12VDC output (Fig. 1b, pg. 1). Port LED definitions for NetWayXT repeater: • UL/CUL Listed for Information Technology Equipment (UL 60950-1). • CE approved. • Repeater module extends range 100m (328 ft.) each. • Port status LEDs. • Compact insulated housing. • Plug-and-play installation. • Auto detection and protection of legacy non-PoE cameras. • No external power required. • Compatible with NetWay1, NetWay8 and NetWay16 Specifications: NetwayXT Repeater IN OUT Power Power LED Structured Cable from NetWay1, NetWay8 NetWay16 or last NetWayXT Structured Cable from PoE Camera/ Device or next NetWayXT Port Staus LEDs www.altronix.com I.T.E. 43KC Fig. 1 Fig. 1a NetWayXT - Repeater Rev. 042409 Status Green LED Yellow LED OFF Indicates it is connected as 10Base-T or no link. Indicates no link. ON Indicates it is connected as 100Base-TX. Indicates a link. Blinking ------- Indicates activity. Fig. 1b

NetWayXT - 1 - Overview: Altronix NetWayXT repeater modules interface with NetWay midspans to extend power and data (video) an additional 100m (328 ft.). A maximum range of 600m (1968 ft.) is possible using multiple repeaters, based on camera/device port requirement. Installation Instructions: 1. Mount NetWayXT in desired location utilizing the mounting hole (Fig. 1a, pg. 1). 2. Connect structured cable from port marked [OUT] on NetWay1/NetWay8/NetWay16 to port marked [IN] on the NetWayXT (Fig. 1b, pg. 1). 3. Connect structured cable from port marked [OUT] on NetWayXT to the PoE camera/device or next NetWayXT repeater (Fig. 1b, pg. 1). 4. Port status LEDs will illuminate on NetWayXT indicating the port is operational (Fig. 1b, pg. 1, refer to Port LED definitions on pg. 1). 5. Power LED will illuminate indicating 12VDC output (Fig. 1b, pg. 1). Port LED definitions for NetWayXT repeater: • Repeater module extends range 100m (328 ft.) each. • Port status LEDs. • Compact insulated housing. • Plug-and-play installation. • Auto detection and protection of legacy non-PoE cameras. • No external power required. • Compatible with NetWay1, NetWay8 and NetWay16 Specifications: NetwayXT Repeater IN OUT Power Power LED Structured Cable from NetWay1, NetWay8 NetWay16 or last NetWayXT Structured Cable from PoE Camera/ Device or next NetWayXT Port Staus LEDs www.altronix.com Fig. 1 Fig. 1a NetWayXT - Repeater Rev. 042409 Status Green LED Yellow LED OFF Indicates it is connected as 10Base-T or no link. Indicates no link. ON Indicates it is connected as 100Base-TX. Indicates a link. Blinking ------- Indicates activity. Fig. 1b