American Standard 7522 Manuals

M30 © 2008 AS America Inc. Revised 8/05 To Be Specified: ❏ Gooseneck Spout: 7522.055 ❏ Knee Action Mixing Valve: 7676.029 ❏ Grid Drain: 7716.020 ❏ Trap: ❏ Nipple: ❏ Painted Bracket Support: 485742-600 (2 req’d) ❏ Flex Tempered Supply (by others): SURGEON’S SCRUB SINK VITREOUS CHINA SURGEON’S SCRUB SINK • Vitreous china • Low front rim • Wall hanger • For wall hanger (included) or for exposed bracket support [381mm (15") painted brackets available] ❏ 9047.044 Faucet holes on 203mm (8") centers ❏ 9047.093 Single center faucet hole (Illustrated) Nominal Dimensions: 711 x 559mm (28" x 22") Compliance Certifications - Meets or Exceeds the Following Specifications: • ASME A112.19.2 for Vitreous China Fixtures Available in White Only NOTES: * DIMENSION SHOWN FOR LOCATION OF “P” TRAP IS SUGGESTED. 15" PAINTED SUPPORT BRACKETS 485742-600 AVAILABLE AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. 356mm (14) FINISHED WALL 1-1/2 O.D. TAILPIECE FINISHED FLOOR 711mm (28) 914mm (36) 356mm (14) T-7F HANGER 559mm (22) MIXING VALVE BODY 254mm (10) 305mm (12) 425mm (16-3/4) 140mm (5-1/2) 445mm (17-1/2) 76mm (3) 146mm (5-3/4) 292mm (11-1/2) 73mm (2-7/8) 1-1/2 N.P.T.. WASTE OUTLET 127mm (5) CL 76mm (3) 76mm (3) 76mm (3) C/L OF 3/8 N.P.T. SUPPLIES 381mm (15) BRACKETS (485742-600) TO BE ORDERED SEPARATELY 133mm (5-1/4) C/L OF TEMP. SUPPLY 25mm (1) * 457mm (18)