AMF-BRUNS EasyPull Manuals

Art.-No.: 10022366 │ 06/2017 Faults on the EasyPull If problems or faults occur on the EasyPull, refer to the Chapter “Faults and Troubleshooting” in the full Operating Instructions. Contact our Customer Service Department if a fault can not be rectified using the information given there. Customer Service The AMF-Bruns customer service department will be more than pleased to assist in questions regarding the ordering of spare parts, fault rectification, maintenance and repair work. Address: AMF-Bruns GmbH & Co. KG Hauptstraße 101 26689 Apen Telephone: +49 (0) 44 89 / 72 72-30 Telefax: +49 (0) 44 89 / 62 45 E-mail: [email protected] AMF-Bruns GmbH & Co. KG Hauptstraße 101 | 26689 Apen | Germany Telephone +49 (0) 4489 / 72 72 30 Telefax +49 (0) 44 89 / 6245 [email protected] www.amf-bruns.de These brief operating instructions do not in any way replace the full Operating Instructions! Please read the full Operating Instructions thoroughly before using the product for the first time! www.amf-bruns.de BRIEF OPERATING INSTRUCTIONS EasyPull AMF-Bruns EasyPull Issue: June 2017 / Subject to technical changes without notice.

AMF-BRUNS USER AND INSTALLATION MANUAL EASY PULL FRONT WHEELCHAIR RESTRAINTS WARNING Carefully read, understand and follow all warnings and instructions provided in this manual, and keep it in a safe place for future reference. If you have any doubt whatsoever regarding the use or maintenance of any AMF-Bruns product, please contact AMF-Bruns. Failure to follow these warnings and instructions can result in product malfunction or loss of control of the vehicle, causing an accident, severe personal injury or death. This guide contains current information at the time of printing. AMF-Bruns reserves the right to modify systems or content without notice. Please visit our website for updated versions. AMF-BRUNS OF AMERICA www.amfbrunsamerica.com REV 4/2018 Part Number: - TR-600002

www.amf-bruns.de Operating Instructions EasyPull

Operating Instructions www.amf-bruns.de EASYPULL

Before Daily Use • Visually inspect Easy Pull for webbing damage. • Check that buckles latch correctly, magnets are not broken or missing, etc. • Check magnets position and tighten magnet locking screws by turning clockwise after each adjustment. After Daily Use • Always fully retract webbing back into housing. • Report any damage or malfunctions on unit. System Operation: Load Wheelchair • Open rear door and unfold ramp. • Grab and hold both loops of webbing. • Press & hold the “A” or “C” button on remote control and pull webbing until you’re at the end of the ramp. • ONLY USE “C” BUTTON WITHOUT WHEELCHAIR ATTACHED. • Secure wheelchair by feeding webbing through/around a solid member of wheelchair’s frame or any location showing this symbol: • Adjust magnets according to size of wheelchair. • Magnets MUST BE minimum 10” ahead of footrest of the wheelchair. • Release wheelchair brakes. • Position yourself behind wheelchair. • Holding chair irmly, press & hold “B” button on the remote control. • Guide wheelchair safely into vehicle until magnets touch base (approximately 3 cm / 1 3/16” away). • Once system locks, pull wheelchair backwards ensuring chair is safely locked. • Hook up rear securements by anchoring retractor or belt to vehicle’s loor. • Place hook or loop on a solid frame of wheelchair frame or any location using this symbol: • Apply tension on the retractors or belts accordingly. DO NOT OVER-TENSION. Apply wheelchair breaks. • Occupant system lap & shoulder belt must always be used. • Fold ramp and close rear door safely. AMF-BRUNS EASYPULL USER GUIDE