AMP Research BedStep AMP 75314-01A Manuals

Chevy Silverado / GMC Sierra 1500 2014-2015 Torque wrench 18mm T25 20-03797-10 19-03783-90 18mm 15-03962-90 13mm 33 ft-lbs / 44 Nm ParT NuMber: aMP 75314-01a 15-03961-90 15-03963-90 18mm 13mm 19-03901-90 19-03900-90 19-03377-90 11-03639-90 19-03901-90 15-03948-90 1 2 3 4 remove factory nuts Install bracket to truck Torque nuts to 59 ft-lbs / 80Nm Insert threaded bracket (19-03963-90) into bum- per and assemble bracket (19-03961-90) with supplied bolt. Use slotted end of bracket at bolt. T25 13mm Install bracket (19-03962-90) to upper bed panel. Slotted side will mount on bed panel. See im- age for bracket orientation. use provided bolts and nuts to mount and torque bolts to 16 ft-lbs / 22Nm Install step pad. Offset pad to rearward position Torque 3 PT screws to 5 ft-lbs /6Nm Note: Overtightening screws may damage step pad. 5 6 7 8 Congratulations on the purchase of your AMP RESEARCH BedStep® Here’s what you should know... OPERATION  The AMP Research BedStep® is foot operated and deploys and retracts with a nudge of your foot.  To deploy, press down using your left foot, on the foward outside corner of the step pad.  To retract, gently kick the underside of the step pad.  Max Load Capacity: 300lbs.  Always use appropriate hand holds when stepping up to or down from your truck’s cargo bed. MAINTENANCE TIPS The step pad surface and linkage arms can be washed with mild soap and water using a soft brush or sponge to dislodge any mud, dirt or accumulated road grime. Rinse with fresh water. To prevent slipping, avoid applying waxes, lubricants or protectants like Armor All® to the step surface. ATTENTION! BEDSTEP SHOULD ALWAYS BE STOWED IN THE RETRACTED POSITION WHEN DRIVING.