Operation & user’s manual [PDF] (12 pages)
- Updated: 16.03.2026
Document Preview & Text Transcription
User Guide
AirVox™ S690 / SW690 / SW695
Battery Powered PA System with
Thank you for choosing one of the AirVox Series PA Sys-
tems with from AmpliVox Portable Sound Sys-
tems.
We are excited in introducing this truly unique system. Our
system combines flexibility with functionality. Please refer to
this user guide as you enjoy the unique capabilities of another
quality product from AmpliVox Portable Sound Systems.
We encourage you to visit our website www.ampli.com to
register your product for its warranty coverage, sign up to re-
ceive our newsletter, download our catalog, and learn more
about the complete line of AmpliVox audio visual products,
AmpliVox • 650 Anthony Trail Suite D, Northbrook, IL 60062 • Phone: (800)267-5486 • Fax: (800)267-5489 www.ampli.com
TABLE OF CONTENTS
SAFETY INSTRUCTIONS …………..................................... 2
WHAT’S IN THE BOX ………………..................................... 3
SPECIFICATIONS …………................................................ 3
BACK PANEL / AUDIO CONTROLS .................................... 4
WIRELESS RECEIVER ………….……….............................. 5
WIRELESS HANDHELD MICROPHONE ………………….… 5
BLUETOOTH ………..…….................................................... 6
BATTERY COMPARTMENT …………….............................. 7
SPEAKER STAND MOUNT …………………………………… 8
WIRELESS SPEAKER TRANSMITTER ………………….…. 9
TROUBLESHOOTING / SERVICING ................................ 10
WARRANTY ….................................................................. 11
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by AmpliVox Portable
Sound Systems is under license.
READ FIRST ABOUT BATTERY OPERATION!
BY OBSERVING A FEW SIMPLE RULES, YOU CAN EXTEND THE
LIFESPAN OF THE SEALED LEAD ACID (SLA) BATTERIES THAT
OPERATE YOUR AMPLIVOX BATTERY POWERED PORTABLE
PA SYSTEM OR ACCESSORY:
• ALWAYS KEEP YOUR AMPLIVOX PORTABLE PA SYSTEM
PLUGGED IN AND CHARGING WHEN NOT IN USE.
• FOR LONG TERM STORAGE (OVER 1 MONTH) WE
RECOMMEND DISCONNECTING THE SLA BATTERIES TO
AVOID GRADUAL, CONTINUOUS DISCHARGE.
•
ALWAYS STORE SLA BATTERIES IN A CHARGED
CONDITION WHEN REMOVED FROM SERVICE.
•
FOR SLA BATTERIES IN STORAGE, APPLY A TOPPING
CHARGE EVERY SIX MONTHS.
• AVOID REPEATED DEEP DISCHARGES. THIS PRACTICE
WILL CUT THE LIFE OF THE BATTERY SIGNIFICANTLY.
•
AVOID OPERATING SLA BATTERIES AT ELEVATED
AMBIENT TEMPERATURES.
• BATTERY STATUS INDICATOR - RED = NO BATTERY POW-
ER, YELLOW / ORANGE= ABOUT 4 HOURS LEFT. CHARGE
BATTERY OVERNIGHT FOR BEST RESULTS.
2
IMPORTANT SAFETY INSTRUCTIONS
Before using this product, read the instruction manual for important safety information. Please retain this manual
for future reference and warranty information.
Cleaning
When cleaning the device, please use a soft, dry cloth. Never use benzene, paint-thinner, or other chemicals on
the device.
Location
Place the device in stable location, so it will not fall causing damage to the device or bodily harm.
Intended use
The product may only be used with the original parts intended for it. The intended use includes adherence to the
specified installation instructions. The manufacturer accepts no liability for damage arising due to improper use.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compli-
ance could void the user’s authority to operate the equipment.
IMPORTANT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. The unit’s circuitry may cause interference to nearby
radios. To prevent interference, either switch the unit off or move away from the affected radio.
NOTE: This equipment complies within the limits for a class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
NOTE: Shielded cables may be required to be used with this unit to ensure compliance with the Class B FCC
limits.
3
WHAT’S IN THE BOX
S690 / SW690 / SW695 SPECIFICATIONS
Rated Power Output:
50 W RMS
Speaker:
6" X 8"
Frequency Response:
200 Hz to 15 kHz
Sensitivity:
124 dB SPL @ 1 W / 1 M
PA Battery:
Two 12 volt rechargeable Sealed Lead
Acid Batteries (SLA), 2.9 AH,
User accessible and replaceable
USB Charger:
5V / 500mA
Wireless PA
Frequency:
16 preset channels.
Wireless Range:
Up to 300 Feet (91 meters)
Range: Up to 30 Feet
AC Power:
100-240 V Auto sensing, 50/60 Hz
Microphone Input:
1/4" (6.3mm)
Weight:
15 lbs. (with batteries) 6.8 kgs
Dimensions :
14" H x 12 1/2" W x 10" D
SW690
•
AirVox PA
•
16 Channel Wireless
Receiver
•
Headset / Lavalier Mi-
crophone & Wireless
Bodypack Transmitter
•
Universal Power Supply
with North America IEC
Power Cord
•
Two Rechargeable SLA
Batteries (Installed)
•
Flex Antenna
S690
•
AirVox PA
•
Wired Handheld Micro-
phone (not shown)
•
Universal Power Sup-
ply with North America
IEC Power Cord
•
Two Rechargeable
SLA Batteries
(Installed)
•
Flex Antenna
SW690 Model Shown
SW695
•
AirVox PA
•
16 Channel Wireless
Receiver
•
Wireless Handheld
Microphone Transmitter
(not shown)
•
Universal Power Supply
with North America IEC
Power Cord
•
Two Rechargeable SLA
Batteries (Installed)
•
Flex Antenna
4
BACK PANEL
•
POWER SWITCH B : Press to turn ON. Power LED and
Battery Status Meter H will light.
•
MASTER VOLUME C : Rotate knob clockwise to
increase volume of PA to desired level.
•
LINE / MICROPHONE ,VOLUME / TONE CON-
TROLS : Work separately from MASTER VOLUME.
•
Rotate knob clockwise to increase VOLUME. Turn TONE
knob counter-clockwise for more bass or clockwise for more
treble.
•
LINE IN / OUT : 3.5mm jacks for other audio devices.
Use LINE OUT when using cable to connect to the S1274
REMOTE COMPANION SPEAKER.
•
BATTERY CHARGER / DC IN : To charge the battery,
connect the PA to 110-220VAC using the supplied
power cord and AC Adapter. The battery will charge when
unit is operating with AC power, HOWEVER, the unit will
charge faster with the power switch in the “off”
position. Charging time is about 7 hours.
The PA should be plugged in and charging when not in
use to maximize battery life. Recharging the PA only
when the battery status light is orange or red will short-
en the useful life of the batteries.
•
BATTERY STATUS METER : The color of the light indi-
cates the condition of the battery. Red – battery low, re-
charge immediately; Yellow/Orange – battery at 50%
should be recharged before use. Green - fully
charged.
A full charge should give you up to 10 hours of
operating time ( less if using for music).
•
USB CHARGING : A 5V, 500mA charging connector
has been provided to help maintain your battery in a cell
phone, tablet or computer while in use with the PA speaker.
AUDIO CONTROLS
BLUETOOTH
AUDIO CONTROLS
16 CHANNEL DIGITAL
WIRELESS RECEIVER
B
C
D
E
F
G
H
I
J
D
•
WIRED MICROPHONE INPUT : Combination XLR / ¼″
connector (this jack will accept either type microphone). If
you plug in a line level device into mic level the sound will be
loud and distorted. A microphone with an XLR connector is
typically Mic Level. A microphone with a 1/4" connector is
typically Line Level.
•
PHANTOM POWER : When using a Phantom
Microphone press button to activate circuitry.
•
EXTERNAL SPEAKER JACK : 1/4" output jack. Use for
connecting to a PASSIVE SPEAKER.
•
SIREN BUTTON : Single - Variable tone @125 dB.
Push and hold.
QUICK SET-UP GUIDE
Instructions, when this manual
cannot be found.
E
G
F
I
J
H
K
L
K
L
M
M
UHF ANTENNA CONNECTOR
Pages Preview: