AMX MXA-MPL Manuals

Operation/Reference Guide User Interface Accessories MXA-MP/MPL Modero X Series® Multi Preview and Multi Preview Live Last Updated: 12/12/2012

Installation Guide MXA-MPL Modero X Series® Multi Preview Live Overview The MXA-MPL Modero X Series® Multi Preview Live (FG5968-10) is a touch panel accessory that displays an HD video stream on Modero X Series Touch Panels when used in conjunction with a high-definition (HD) Enova DVX All-In-One Presentation Switcher or Enova DGX Digital Media Switcher. The MXA-MPL accepts digital video inputs over a DVI Multi-Format connector and converts them to a video stream. The MXP-MPL also supports all of the features of the MXA-MP, displaying up to 10 JPEG preview images on a Modero X Series touch panel. The MXA-MPL makes it easy for users to identify quickly what is currently being displayed by up to 10 source devices. Note: For full functionality, the MXA-MPL may be used with the Enova series media switchers and Modero X Series touch panels. The MXA-MPL may not be used with previously released AMX touch panels or switchers. For more information on installation and configuration, refer to the MXA-MP/MXA-MPL Operation/Reference Guide, available at www.amx.com. Common Applications Use the MXA-MPL to preview a live video stream or snapshot of the content from a source device before switching to that source. Features • Supports one (1) HD digital video stream or up to 10 preview images. • Updates all 10 preview images sequentially or one image continuously. • Streams digital video sources to a Modero X Series Touch Panel • Seamlessly interconnects between a Modero X Series Touch Panel and an Enova DGX or Enova DVX. Product Specifications Rebooting the MXA-MPL To reboot the MXA-MPL, press and hold the Reset button (FIG. 1) for one second. Configuring the MXA-MPL Configuring the MXA-MPL into a network requires modification of the device’s corresponding NetLinx files via NetLinx Studio and the associated touch panel pages via TPDesign 4. Documentation of the available commands may be found in the Modero X Series Programming Guide, available at www.amx.com. Resetting the MXA-MPL to Factory Defaults To reset the MXA-MPL’s configuration settings to its factory defaults: 1. Press and hold the Factory Reset button (on the front panel) for about 5 seconds. 2. The Power LED will blink three times. At this time, release the Factory Reset button. To reset the MXA-MPL’s firmware from its current version to its factory default version: 1. Press and hold the Factory Reset button (on the front panel) for about 10 seconds. 2. At about the 5-second mark, the Power LED will blink 3 times. Keep holding the Factory Reset button. At the 10-second mark, the Power LED will blink 7 times at a faster rate. At this time, release the Factory Reset button. Connecting the MXA-MPL to a Network Since the MXA-MPL works to transmit HD video and images from an Enova switcher to a Modero X touch panel, it needs to be connected between the switcher and the touch panel. To connect the touch panel to the MXA-MPL: 1. Insert the incoming network connection cable from the Enova switcher to the upper Ethernet In RJ-45 connector (FIG. 1). 2. If the touch panel is not panoramic (MXD/T-1000, MXD/T-700, MXD-430), connect an outgoing Ethernet cable from the MXA-MPL’s Ethernet Out RJ-45 connector to an AMX-certified high-power Power over Ethernet injector. Do not apply power until the installation is complete. 3. If the touch panel is a panoramic model (MXD/T-1900L-PAN or MXD/T-2000XL-PAN), outgoing power to the touch panel may be supplied via the MXA-MPL’s 2-pin connector output (FIG. 1) or through another source. Do not apply power until the installation is complete. FIG. 1 MXA-MPL MXA-MPL Specifications Power Requirements: • MXA-MPL only: 120VAC at 170ma (20W) • MXA-MPL with touch panel: 120VAC at 410ma (50W) Start-Up Inrush Current: 17.2A at 116.8VAC Video: Video Streams: Max Number of Active Video Streams: 1 Video Preview Images: • Video Preview Image Format: JPEG (accessed over HTTP) • Max Number of Video Preview Images:10 • Min Refresh Time of Preview Images: 2 sec Video Input: HDMI, DVI, RGBHV, S-Video, composite or component video Video Input Resolutions: Video Input Resolutions supported by Firmware v2.1.28 or higher: • HDMI/DVI: 1024 x 768p @ 60 Hz, 720 x 480i @ 60 Hz, 720 x 480p @ 60 Hz • PAL: 576i, 576p @ 50 Hz • NTSC: 480i, 480p @ 60 Hz Video Input Resolutions supported by Firmware versions previous to v2.1.28: • HDMI/DVI: 640 x 480p @ 60 Hz, 800 x 600p @ 60 Hz, 1024 x 768p @ 60 Hz,1280 x 720p @ 60 Hz • PAL: 576i, 576p@50 Hz • NTSC: 480i, 480p@60 Hz Video Input Resolutions not supported: • 1280 x 768p @ 60 Hz, 1920 x 1080p @ 60 Hz Video Output: Up to 720p @ 30 fps over IP (Matches input resolution) Communications: 10/100 port, RJ-45 connector with Ethernet/IP pass-through Audio Input: Unbalanced 1/8th-inch mini-jack connector (for use with non-HDMI audio only) Front Components: Power LED: Lights green when device is receiving power. Video Input Diag Out Audio In (not used) 2-pin Connector Output Ethernet In Ethernet Out Power Input Power Status Video Input LAN Panel Video Outpu Reset Factory Reset Front Rear (to Touch Panel) Status LED: Toggles on/off green every 5 seconds if communicating to the panel.(i.e.: the panel is configured to use the MXA-MPL). Video Input LED: Lights red when receiving video signals. LAN LED: Lights green when the LAN connection is enabled. Panel LED: Lights green when device is connected to a panel. Video Output LED: Lights red when sending a video stream to a touch panel. Reset button: Reboots the device when pressed. Factory Reset button: Resets the unit to factory defaults when pressed for at least 5 sec- onds. Rear Components: Video Input: DVI-I multi-format video input Diag Out: HDMI diagnostics output (720p only). Audio In: 1/8th-inch mini-jack input (for use with non-HDMI audio only) 2-Pin Connector Output: 2-pin 3.5 mm Phoenix-style connector output, 12 Volts, 3 Amps Ethernet In: 10/100 port, RJ-45 connector for Ethernet connection to network. Ethernet Out: 10/100 port, RJ-45 connector for Ethernet connection to touch panel. Power Input: • IEC power cord connector • 100-240V AC • 47-63Hz Operating Environment: • Temperature (Operating): 32° F to 104° F (0° C to 40° C) • Temperature (Storage): 4° F to 140° F (-20° C to 60° C) • Humidity (Operating): 20% to 85% RH • Humidity (Storage): 5% to 85% RH • Power (“Heat”) Dissipation: 232 BTU/hr Dimensions: 1 9/16” x 8 1/4” x 7 3/16” (4 cm x 21 cm x 18.2 cm) Weight: 2.80 lbs (1.27 kg) Certifications: • UL • FCC Part 15 Class A • CE EN 55022 Class A and EN 55024 • CB Scheme IEC 60950-1 • IC • IEC/EN-60950 • UL • RoHS Included Accessories: • MXA-MPL Installation Guide (93-5968-10) • MIC AC Universal Power Cord (CA1090-131) Other AMX Equipment: • MPA-VRK, Rack Shelf 1RU 7.3" Depth (FG5968-30) • AC-SMB, Surface Mount Bracket Accessory (FG525) • CC-DVI-5BNCM, DVI to 5 BNC Male Cable 6' (FG10-2170-08) • CC-DVI-RCA3M, DVI to 3 RCA Male Cable 6' (FG10-2170-09) • CC-DVIM-VGAF, DVI to HD-15 Female Adapter (FG10-2170-13) • CC-DVI-SVID, DVI to S-Video Cable (FG10-2170-10) • CC-3.5ST5-RCA2F, 5-pin 3.5mm Phoenix-style to 2 RCA Female Cable (FG10-003-20)

QUICK START GUIDE MXA-MPL Modero X Series® Multi Preview Live Overview The MXA-MPL Modero X Series® Multi Preview Live (FG5968-10) is a touch panel accessory that displays an HD video stream on Modero X Series Touch Panels when used in conjunction with a high-definition (HD) Enova DVX All-In-One Presentation Switcher or Enova DGX Digital Media Switcher. Note: For full functionality, the MXA-MPL may be used with the Enova series media switchers and Modero X Series touch panels. The MXA-MPL may not be used with previously released AMX touch panels or switchers. For more information on installation and configuration, refer to the MXA-MP/MXA-MPL Instruction Manual, available at www.amx.com. Product Specifications Installation Temperature and/or cooling approaches that must be taken into consideration to maintain the product within the specified operating temperature. FIG. 2 represents an MXA-MPL in a typical rack mount installation, with full air circulation around the front and back. In this case, the main concern is with heat building up between components, possibly to levels that may affect device operation. The MXA-MPL may also be put on a freestanding location or mounted either vertically or horizontally under a table using two surface mounting brackets (FG525) (FIG. 3). Installation in a rack requires an (optional) MPA-VRK Rack Mounting Tray (FG5968-30): 1. Select a position on the Rack Mounting Tray for the installation. The Rack Mounting Tray contains screw holes to allow single or double MXA-MPL installations. 2. Using the screws included with the MPA-VRK, install the screws to the bottom of the MXA-MPL through the Rack Mounting Tray (FIG. 4). Use four screws for each device, one at each corner. 3. Connect the Rack Mounting Tray to the rack with the provided rack mount screws. Connecting Video Input to the MXA-MPL The MXA-MPL has a single DVI (12+5) female Multi-Format Video input connection on the rear panel that supports the following video input types: Each of these video inputs support specific video resolutions as follows: AMX has a series of optional cables to make the connection between the Multi-Format Video Input to specific video types easier. • DVI to 5 BNC Male Cable 6 (FG10-2170-08) • DVI to 3 RCA Male Cable 6 (FG10-2170-09) • DVI to HD-15 Female Adapter (FG10-2170-13) • DVI to S-Video Cable (FG10-2170-10) (FIG. 5). Note: When connecting an Enova DVX to an MXA-MPL, an HDMI cable adapter may be needed to connect from the DVX’s HDMI cable to the MXA-MPL Video Input port. FIG. 1 MXA-MPL MXA-MPL SPECIFICATIONS Power Requirements: • MXA-MPL only: 120VAC at 170ma (20W) • MXA-MPL with touch panel: 120VAC at 410ma (50W) Start-Up Inrush Current: 17.2A at 116.8VAC Power Input: • IEC power cord connector • 100-240V AC • 47-63Hz Environmental: • Temperature (Operating): 32° F to 104° F (0° C to 40° C) • Temperature (Storage): 4° F to 140° F (-20° C to 60° C) • Humidity (Operating): 20% to 85% RH • Humidity (Storage): 5% to 85% RH • Power (“Heat”) Dissipation: 232 BTU/hr Dimensions: 1 9/16” x 8 1/4” x 7 3/16” (4 cm x 21 cm x 18.2 cm) Weight: 2.80 lbs (1.27 kg) Certifications: • UL • FCC Part 15 Class A • CE EN 55022 Class A • EN 55024 • CB Scheme IEC 60950-1 • IC • IEC/EN-60950 • UL • RoHS Included Accessories: • MXA-MPL Installation Guide (93-5968-10) • MIC AC Universal Power Cord (CA1090-131) FIG. 2 HEAT CONVECTION IN RACK-MOUNTED DEVICES Video Input Diagnostic Output Audio In 2-pin +12V Ethernet In Ethernet Out Power Input Power Status Video Input LAN Panel Video Output Reset Factory Reset Front Rear (Pass-through to Touch Panel) Multi-Format Power Output FIG. 3 INSTALLING TWO AC-SMB SURFACE MOUNT BRACKETS (FG525) FIG. 4 INSTALLING TWO MXA-MPL DEVICES IN A RACK MOUNTING TRAY • HDMI • DVI • RGBHV • S-Video • Composite • Component INPUT TYPE RESOLUTION INPUT TYPE RESOLUTION Component • 720x480i@60Hz • 720x480p@60Hz • 720x576i@50Hz • 720x576p@50Hz HDMI • 640x480p@60Hz • 800x600p@60Hz • 1024x768p@60Hz • 1280x720p@60Hz Composite • ntsc • pal-bghid • pal-m SVideo • ntsc • pal-bghid • pal-m DVI • 640x480p@60Hz • 800x600p@60Hz • 1024x768p@60Hz • 1280x720p@60Hz RGB/Graphics • 640x480p@60Hz • 800x600p@60Hz • 1024x768p@60Hz • 1280x768p@60Hz Screws MPA-VRK