Anest Iwata Wider1A Manuals

2 pdf manual(s) Anest Iwata Wider1A for free download (Document Types: Instruction manual)

Anest Iwata Wider1A Instruction manual [PDF] (6 pages)

  • Identifier: id-2206854
  • Brand: Anest Iwata
  • Device: Wider1A Paint Sprayer
  • Type: PDF
  • Key Aspects: Cleaning and Sanitization Methods, Step-by-Step Assembly Procedures, Regulatory Compliance and Standards
  • UPD Date: 12.05.2026
  • Source File: 2080778.pdf
  • Pages: 6
  • Description: User documentation for the Anest Iwata Wider1A.
Pages Preview:
  • - 2 -  Parts list ◆Marked parts are wearable parts. ◎ When ordering parts, specify spray gun’s model, part name with ref. No. and marked No. of air cap assy, fluid nozzle and fluid needle. ◎ When replacing fluid nozzle or/and fluid needle, please replace both fluid nozzle and fluid needle assy together. ◎ When receiving the spray gun, make sure that it has not been damaged during transport or storage and also check that all the above contents
  • - 3 -  How to connect Step1 Fit the gun to fitting stay, aim at spraying direction and fix it. Step2 Connect atomizing air hose to atomizing air side (Cap marked side) and operating air hose to operating air side( CYL marked side). Step3 Connect fluid hose to fluid inlet side. Step4 supply thinner to automatic gun. Spray and clean fluid passage with thinner. Step5 supply paint to automatic gun and test spray and adjust air volume, fluid output and patte
  • - 4 -  How to operate Step1 Adjust operating air pressure from 3 to 4 bar (43 to 57 PSI). NOTE: Valve orifice inside three- way solenoid valve should be minimumφ4mm (0.157 in) and also operating air hose length should be within 10m (32.8ft) with the inner diameter more than φ6mm 0.236in) to avoid delayed operation and any kind of failure. Step2 Although atomizing air pressure varies according to spray conditions, pulling the piston of the gun with the
  • １ Residual Risk Map Requiring Protective Measures by Machine Users (Abbreviated Name: Residual Risk Map) Product model:
Document Preview & Text Transcription (Main Page)
Click to expand and read text
- 1 - INSTRUCTION MANUAL Automatic Spray Guns Be sure to observe warning s and cautions in this instruction manual. If not, it can cause paint ejection and serious bodily injury by drawing organic solvent. Be sure to observe following marked items which are especially important. Indicates a potentially hazardous situation which, if not avoided, may result in serious injury or loss of life. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or property damage. Indicates notes which we ask you to observe. The safety precautions in this instruction manual are the minimum necessary conditions. Follow national and local regulations regarding fire prevention, electricity and safety as well as your own company regulations. Symbol Marking on the Spray Gun: II 2 G Ex h X This ANEST IWATA spray gun complies with 2014/34/EU Directive relating to equipment and protective systems intended for use in explosive potentially atmospheres. II 2 G Ex h IIB T6 Gb X T Amb +5°C +40°C Complies with European Directive Specific Marking for Explosion Protective Group II (Surface) Category (Zone 1&2) Type of Atmospher e (GAS) Ignition Protection (not applied) Explosion Group (Ethylene) Temperatur e Class (≤ 85°C) Explosion Protection level (EPL) Additional conditions: Any static Electricity should be discharged and needs to be diverted to the ground via a conductive air hose not included. Ambient Temperatur e Important specifications Max. Pressure 0.70MPa / 7.0bar / 100psi Noise level 83dB(A) Spray condition Recommended Measuring point 1m backwards from spray gun, 1.6m height Max. temperature Atmosphere: 5°C ~40°C (41°F~104°F) Air and Fluid: 5°C ~43°C (41°F~109°F) Main specifications Model Type of feed Nozzle orifice Φ mm (in) Air cap assy Mark Recommended condition Air consumption l/min (cfm) Pattern width mm (in) Air & fluid connection Mass g (lbs.) *1 Atomizing air pressure MPa (bar / PSI) Fluid output ml/min WIDER1A-08E2P Pressure 0.8 (0.031) E2P 0.29 (2.9/43) 150 270 (9.5) 190 (7.5) 【Air】 Atomizing air:Φ8 Operation air:Φ6 【Fluid】 WIDER1A:G1/4 WIDER2A:G3/8 400 (0.88) WIDER1A-10E2P 1.0 (0.039) 200 220 (8.7) WIDER1A-13H2 1.3 (0.051) H2 250 260 (9.2) 230 (9.1) WIDER2A-12G2P 1.2 (0.047) G2P 500 530 (18.7) 400 (15.7) 420 (0.93) WIDER2A-15K2 1.5 (0.059) K2 270 330 (11.7) 340 (13.4) WIDER2A-20R2 2.0 (0.079) R2 400 360 (12.7) 320 (12.6) WIDER2A-25W1 2.5 (0.098) W1 500 360 (12.7) 330 (13.0) *1. Atomizing air pressure means air pressure at spray gun inlet when trigger is pulled and air flows. This manual contains IMPORTANT WARNINGS and INSTRUCTIONS. Equipment in this manual is exclusively for painting purposes. Do not use for other purposes. The operator shall be fully conversant with the requirements stated in this instruction manual including important warnings, cautions and operation and correct handling. Read and understand the instruction manual, before use and retain for reference. Nozzle needle assy combination Model Fluid nozzle Fluid needle Mark Orifice Φ mm (in) Mark WIDER1A Φ0.8 / W1 / 08 12H WIDER1A Φ1.0 / W1 / 10 Φ1.3 / W1 / 13 15H WIDER1A WIDER2A Φ1.2 / W2 / 12 12H WIDER1A Φ1.5 / W2 / 15 15H WIDER1A Φ2.0 / W2 / 20 20H WIDER2A Φ2.5 / W2 / 25 25H WIDER2A

Anest Iwata Wider1A Instruction manual [PDF] (4 pages)

  • Identifier: id-2032528
  • Brand: Anest Iwata
  • Device: Wider1A Paint Sprayer
  • Type: PDF
  • Key Aspects: Operational Mode Explanations, Component Overview and Descriptions, Model Variations and Compatibility
  • UPD Date: 14.06.2026
  • Source File: 2255330.pdf
  • Pages: 4
  • Description: Stepwise user guide for the Anest Iwata Wider1A.
Pages Preview:
  • - 2 -  Parts list ◆Marked parts are wearable parts. ◎ When ordering parts, specify spray gun’s model, part name with ref. No. and marked No. of air cap assy, fluid nozzle and fluid needle. ◎ When replacing fluid nozzle or/and fluid needle, please replace both fluid nozzle and fluid needle assy together. ◎ When receiving the spray gun, make sure that it has not been damaged during transport or storage and also check that all the above contents
  • - 3 -  How to connect Step1 Fit the gun to fitting stay, aim at spraying direction and fix it. Step2 Connect atomizing air hose to atomizing air side (Cap marked side) and operating air hose to operating air side( CYL marked side). Step3 Connect fluid hose to fluid inlet side. Step4 supply thinner to automatic gun. Spray and clean fluid passage with thinner. Step5 supply paint to automatic gun and test spray and adjust air volume, fluid output and patte
  • - 4 -  How to operate Step1 Adjust operating air pressure from 3 to 4 bar (43 to 57 PSI). NOTE: Valve orifice inside three- way solenoid valve should be minimumφ4mm (0.157 in) and also operating air hose length should be within 10m (32.8ft) with the inner diameter more than φ6mm 0.236in) to avoid delayed operation and any kind of failure. Step2 Although atomizing air pressure varies according to spray conditions, pulling the piston of the gun with the
Document Preview & Text Transcription (Main Page)
Click to expand and read text
- 1 - INSTRUCTION MANUAL Automatic Spray Guns Be sure to observe warning s and cautions in this instruction manual. If not, it can cause paint ejection and serious bodily injury by drawing organic solvent. Be sure to observe following marked items which are especially important. Indicates a potentially hazardous situation which, if not avoided, may result in serious injury or loss of life. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or property damage. Indicates notes which we ask you to observe. The safety precautions in this instruction manual are the minimum necessary conditions. Follow national and local regulations regarding fire prevention, electricity and safety as well as your own company regulations. Symbol Marking on the Spray Gun: II 2 G Ex h X This ANEST IWATA spray gun complies with 2014/34/EU Directive relating to equipment and protective systems intended for use in explosive potentially atmospheres. II 2 G Ex h IIB T6 Gb X T Amb +5°C +40°C Complies with European Directive Specific Marking for Explosion Protective Group II (Surface) Category (Zone 1&2) Type of Atmospher e (GAS) Ignition Protection (not applied) Explosion Group (Ethylene) Temperatur e Class (≤ 85°C) Explosion Protection level (EPL) Additional conditions: Any static Electricity should be discharged and needs to be diverted to the ground via a conductive air hose not included. Ambient Temperatu re Important specifications Max. Pressure 0.70MPa / 7.0bar / 100psi Noise level 83dB(A) Spray condition Recommended Measuring point 1m backwards from spray gun, 1.6m height Max. temperature Atmosphere: 5°C ~40°C (41°F~104°F) Air and Fluid: 5°C ~43°C (41°F~109°F) Main specifications Model Type of feed Nozzle orifice Φ mm (in) Air cap assy Mark Recommended condition Air consumption l/min (cfm) Pattern width mm (in) Air & fluid connection Mass g (lbs.) *1 Atomizing air pressure MPa (bar / PSI) Fluid output ml/min WIDER1A-08E2P Pressure 0.8 (0.031) E2P 0.29 (2.9/43) 150 270 (9.5) 190 (7.5) 【Air】 Atomizing air:Φ8 Operation air:Φ6 【Fluid】 WIDER1A:G1/4 WIDER2A:G3/8 400 (0.88) WIDER1A-10E2P 1.0 (0.039) 200 220 (8.7) WIDER1A-10E1 1.0 (0.039) E1 100 90 (3.2) 140 (5.5) WIDER1A-13H2 1.3 (0.051) H2 250 260 (9.2) 230 (9.1) WIDER1A-15H2 1.5 (0.059) 270 255 (10.0) WIDER1A-05R 0.5 (0.020) 05R 20 40 (1.4) 35 (1.4) WIDER2A-12G2P 1.2 (0.047) G2P 500 530 (18.7) 400 (15.7) 420 (0.93) WIDER2A-15K2 1.5 (0.059) K2 270 330 (11.7) 340 (13.4) WIDER2A-20R2 2.0 (0.079) R2 400 360 (12.7) 320 (12.6) WIDER2A-25W1 2.5 (0.098) W1 500 360 (12.7) 330 (13.0) *1. Atomizing air pressure means air pressure at spray gun inlet when trigger is pulled and air flows. This manual contains IMPORTANT WARNINGS and INSTRUCTIONS. Equipment in this manual is exclusively for painting purposes. Do not use for other purposes. The operator shall be fully conversant with the requirements stated in this instruction manual including important warnings, cautions and operation and correct handling. Read and understand the instruction manual, before use and retain for reference. Nozzle needle assy combination Model Fluid nozzle Fluid needle Mark Orifice Φ mm (in) Mark WIDER1A Φ0.5 / W1 / 05 05H WIDER1A Φ0.8 / W1 / 08 12H WIDER1A Φ1.0 / W1 / 10 Φ1.3 / W1 / 13 15H WIDER1A Φ1.5 / W1 / 15 WIDER2A Φ1.2 / W2 / 12 12H WIDER1A Φ1.5 / W2 / 15 15H WIDER1A Φ2.0 / W2 / 20 20H WIDER2A Φ2.5 / W2 / 25 25H WIDER2A

Anest Iwata Wider1A: Paint Sprayer Category Related Instructions

T720
Tritech T720
23.07.2026 24 pages

Product usage guide for the Tritech T720 Paint Sprayer. The document elaborates on device functions and basic operation, performance details, service instructions.

MATABI BERRY 1,5
Goizper Group MATABI BERRY 1,5
14.04.2026 14 pages

Ref. 8.18.41.200 Mod. BERRY 1,5 D.L/L.G. SS-291-2010 C/ ANTIGUA, 4 - 20577 ANTZUOLA Apartado 211 - 20570 BERGARA - GUIPUZCOA - SPAIN Tel.:  34-943 786000 // Fax: 34-943 766008 [email protected]  //  www.goizper.com ES - Gracias por confiar en nosotros. P Setup and usage guide for the Goizper Group MATABI BERRY 1,5 Paint Sprayer. This documentation details procedures for troubleshooting guides, setup validation, user preferences.

9083
Enabling Devices 9083
04.05.2026 2 pages

Adapted Garden Sprayer- #9083 USER’S GUIDE Product manual for the Enabling Devices 9083 Paint Sprayer. The manual provides information on testing procedures, energy usage, service procedures.

GX series
Graco GX series
01.07.2026 54 pages

3A3212C EN Operation, Parts GX Electric Airless Sprayers For professional use only. Not approved for use in explosive atmospheres or hazardous locations. For portable airless spraying of architectural paints and coatings. Models: GX 3000 psi (207 bar, 20.7 MPa Product instruction handbook for the Graco GX series Paint Sprayer. It includes maintenance procedures and hardware instructions, usage procedures, operating guidelines.