Animo OptiBean Manuals

OptiBean (XL) 50 2013/08 Rev. 0.5 OptiBean (XL) GB 51 2013/08 Rev. 0.5 Service menu continued ... Main item Sub-item Item Description 2.8 read log Last 20 error messages including time and date will be saved 2.9 Erase log Are you sure? Log will be erased 2.10 Load defaults # See Section 4 Models and recipes Are you sure? Model # OB2 OB3 OB2 variant OB2 variant OB3 variant OB3 variant OB3 variant OB3 variant OB3 variant OB3 variant Type code 2B1A xx00 2B2A xx00 2B3A xx00 2B4A xx00 2B5A xx00 2B6A xx00 2B7A xx00 2B8A xx00 2B9A xx00 2BAA xx00 The defaults must be loaded when a new circuit board is installed. When loading the defaults, the OptiBean model stated on the type plate must be set. Only after con� rming the question ‘are you sure?’ the right model settings will be loaded. Note; � When you con� rm this setting, all factory settings are loaded into the control and all changed programmed values are lost. � After loading the defaults, the PIN code is 2-2-2-2-2 again and the language is set to English again. Change as necessary. 2.11 SD menu Before loading or saving data, place an empty SD memory card in the card reader. This is located behind the stainless steel panel on the inside of the door. Load data Memory Card Personal settings With this menu item Personal settings can be loaded into the machine using an SD memory card (uploaded). This � le contains the (changed) personal settings for the menus; 2.4 Settings / 2.6 Service boiler / 2.13 Additional settings. The data � le (2Bxxxx00.MDU) must be on the SD card. Language With this menu item, a non-standard language set can be loaded into the machine. The data � le (xxxxxx.TLF) must be on the SD card. Recipe With this menu item Personal recipes can be loaded into the machine using an SD memory card (uploaded). This � le contains the (changed) personal recipes for the menus; 2.1 Quick recipe / 2.2 Button settings / 2.3 Recipe settings. The data � le (2Bxxxx00.RCU) must be on the SD card. Counters With this menu item Recipe counters can be loaded into the ma- chine using an SD memory card (uploaded). There must be a data � le (2Bxxxx00.CNT) on the SD card. This � le contains all recipe counters from the 1.3 Recipe counters Use this function only when, for example, a new control must be installed in the machine and the counters must be ‘moved’ from the old control to the new one. Do not misuse this function! Operating hours With this menu item Operating hours can be loaded into the ma- chine using an SD memory card (uploaded). There must be a data � le (2Bxxxx00.TMR) on the SD card. This � les contains all the operating hours from the menu 2.7 Hard- ware test / operating hours. Use this function only when, for example, a new control must be installed in the machine and the counters must be ‘moved’ from the old control to the new one. Do not misuse this function! Service menu continued ... Main item Sub-item Item Description 2.11 SD menu (continued....) Save data Memory Card Personal settings With this menu item Personal settings can be saved on an SD memory card and/or copied to another machine. All changed settings made in the menus; 2.4 Settings / 2.6 Service boiler / 2.13 Additional settings are saved in a data � le (2Bxxxx00. MDU) on the card. Recipes With this menu item Personal recipes can be saved on an SD memory card and/or copied to another machine. All changed settings made in the menus; 2.1 Quick recipe pro / 2.2 Button settings) / 2.3 Recipe settings are saved in a data � le (2Bxxxx00.RCU) on the SD card. Counters With this menu item Recipe counters (personal recipes) can be saved on an SD memory card. All counter readings from the menu; 1.3 Recipe counters are saved in a data � le (2Bxxxx00.CNT) on the SD card. Note; after the counters have been saved you will be asked if the counters in the machine must be reset. Press Esc. (X) for NO, press Enter (V) for YES. Log With this menu item the Log (error messages overview) can be saved on an SD memory card. All error messages from the menu; 2.8 Read log are saved in a data � le (2Bxxxx00.LOG) on the SD card. Note; Depending on your settings, Windows can see this � le as a TXT � le. Operating hours With this menu item the Operating hours can be saved on an SD memory card. All operating hours from the menu; 2.7 Hardware test / Operating hours are saved in a data � le (2Bxxxx00.TMR) on the SD card. Note; after the operating hours have been saved you will be asked if the counters in the machine must be reset. Press Esc. (X) for NO, press Enter (V) for YES. 2.12 Change PIN code New PIN code Repeat PIN code With this menu item the PIN code can be changed. Use only the keys 1 to 4. The complete service menu is secured behind this PIN code. This PIN code prevents unintentional changes to the machine settings by untrained personnel. � The factory PIN code is 2-2-2-2-2 PIN code forgotten? In the PIN code input display (operator menu item 1.7) a number is displayed on the right. Enter the associated PIN code (see the list below) to access the service menu. ���������������� � ��������� Pin Code Table No. Pin code No. Pin code No. Pin code 1 3 4 2 4 2 8 2 3 2 4 1 15 2 1 2 1 1 2 3 1 4 3 4 9 2 4 3 2 3 16 1 2 2 3 3 3 4 1 3 4 3 10 3 1 3 3 2 17 3 4 1 4 4 4 4 3 2 3 2 11 1 3 3 3 2 18 4 1 4 3 3 5 2 3 3 4 1 12 1 2 4 1 3 19 3 1 2 4 1 6 4 2 1 3 1 13 4 3 1 2 1 20 2 2 3 2 4 7 2 4 2 4 4 14 1 1 1 4 2

OptiBean OptiBean XL service book Feel like a barista. Model 2011

OptiBean service boek servicehandbuch service book manuel de service OptiBean XL

GB 1 2011/06 Rev. 0.4 OptiBean service boek servicehandbuch service book manuel de service

gebruiksaanwijzing betriebsanleitung user manual mode d’emploi all-guides com

/i gebruiksaanwijzing brugsanvisning user manual brukerhåndbok betriebsanleitung användarhandböck mode d’emploi all-guides com