ANTAIRA LMP-2012G-SFP Series Manuals

LMP-2012G-SFP Series 20-Port Industrial Gigabit PoE+ Light Layer 3 Managed Ethernet Switch, with 8*10/100/1000Tx (30W/port) and 12*100/1000 SFP Ports, 48~55VDC Power Input Hardware Manual Version 1.0 (June 2021)

Antaira Technologies LMP-2012G-SFP Series 20-Port Industrial Gigabit PoE+ Managed Ethernet Switch, w/8*10/100/1000Tx (30W/Port) and 12*100/1000 SFP Slots; 48~55VDC Power Input Quick Installation Guide Version 1.0 (June 2021) Tel: 1-844-268-2472 Fax: 1-714-671-9944 www.antaira.com 19020000000145 Package Check List The package contains the following items: ⚫ Quick installation guide ⚫ LMP-2012G-SFP(-T) ⚫ Wall mounting bracket set with screws ⚫ DC cable –18 AWG & DC jack 5.5 x 2.1mm ⚫ Dust cover set ⚫ RJ45 to DB9 serial console cable Front Panel Layout Top Panel View LMP-2012G-SFP series top panel is equipped with a 4-pin removal terminal block (Relay and Power 2 Input) and a 2-pin removal terminal block (Power 1 Input) (48~55VDC). Product Overview System Interface/Performance  All RJ45 ports support the auto MDI/MDI-X function  Embedded 8*10/100/1000Tx (30W/Port) RJ45 ports and 12*100/1000 SFP slots  Store-and-forward switching architecture  8K MAC address table Power Input & Connection  DC 48 to 55V redundant power, with a 4-Pin Removal Terminal Block (Relay and Power 2 Input) and a 2-Pin Removal Terminal Block (Power 1 Input)  It is recommended to use a UL listed industrial power supply Operating Temperature  Standard operating temperature model: -10°C to 65°C  Extended operating temperature model: -40°C to 75°C Case/Installation  IP30 protection  DIN-Rail and wall mount design LED Indicators LED Color Description Power 1 Green On Power input 1 is active Off Power input 1 is inactive Power 2 Green On Power input 2 is active Off Power input 2 is inactive Status Green On The system is ready and works fine. There are no events occurring. Red Flashing Firmware upgrading On System booting or configured event happens Master Green On ERPS Owner Mode (Ring Master) is ready Off ERPS Owner Mode is not active Ring Green On Ring Network is active Flashing ERPS Ring works abnormally or misconfigured Off Ring Network is not active PoE Load Green Off PoE Load ≤ 50% On PoE Load 51 – 70% Red On PoE Load 71 – 90% Flashing PoE Load 91 – 100% LAN Port 1~8 (Upper LED) Green On Connected to network, 10/100/1000Mbps Flashing Networking is active Off Not connected to network LAN Port 1~8 (Lower LED) Green On The port is supplying power to the powered-device Off No powered-device attached or power supplying fails LINK/ACT (SFP Port 9~20) Green On Connected to network, 1000Mbps Flashing Networking is active Off Not connected to network Amber On Connected to network, 100Mbps Flashing Networking is active Off Not connected to network 4-Pin Removal Terminal Block (Relay and Power 2 Input) 2-Pin Removal Terminal Block (Power 1 Input) LAN# 1~8 – 10/100/1000Tx RJ45 LAN# 1~8 LED for PoE Status LAN# 1~8 LED for Link/Activity Status 10/100/1000Mbps LED for Power 1, Power 2, Status, Master, Ring, and PoE Load Grounding Screw 4-Pin Removal Terminal Block (Relay and Power 2 Input) SFP Port# 17~20 LED for Link/Activity Status 100/1000 Console Port USB for Configuration SFP Port# 9~20– 100/1000 Reset Button 2-Pin Removal Terminal Block (Power 1 Input) SFP Port# 9~16 LED for Link/Activity Status 100/1000