ANXELL ML-600 Manuals

Copyright All Rights Reserved. P-MU-ML-600 Published: 2020.11.25 ML-600M 275 25 24 203 43.5 83.5 3 116 250 ML-600 Electric Lock (with Mechanical Override) Installation Instructions Specifications Dimensions Wiring Diagram Lock Mode: Fail-Secure Operating Voltage: 12~24VAC/DC Current Draw: 500mA / 12VDC, 250mA / 24VDC Operating Temperature: -10°C~+49°C Humidity: 0~85% non-condensing Preload: 300 lbs of pressure strength Solenoid Testing: Tested up to 250,000 cycles Latch Throw: 16mm Relock Delay Time: 3 seconds Optional Cylinder: EYC-72 Unti:mm ML-600M 28 100 150 125 2 Lock Body White White N.C. COM N.O. Access Control (N.O. + COM.) Power Supply Black Red Yellow Green Blue Door Status Output Circuit Description Strike Plates Currrent Draw Pull in (2 secs) Holding Energy-saving Door closed (3 secs) De-energized Time (seconds) De-engergized A. De-energized: Door is in locked status.(Operating in fail-secure mode) B. Pull-in:The electric lock is energized through access control devices. (Please refer to the wiring diagram) C. Energy-saving: After supplying power to unlock for 2 seconds , the current draw will drop to save energy. During this time, the electric lock remains unlocked. D. Door closed: After door is closed, the NIB (deadlatch) will will retract into the lock housing and press the internal micro switch. After door keeps closing for 3 seconds, the lock will be completely de-energized and the door will remain locked. (Without keeping door closed for 3 seconds, the electric lock will not be de-energized and remains unlocked.) 30 Backset Trigger to unlock 12~24VDC/AC