Apantac DA-8HD Manuals

DA-8HD USER MANUAL 1 x 8 Triple Rate (3G/HD/SD-SDI) Reclocking Distribution Amplifier DA-8HD FRONT VIEW 1. Output 5 (ASI compatible) 2. Output 6 (Terminator should be ap- plied when not in use) 3. Output 7 (ASI compatible) 4. Output 8 (Terminator should be ap- plied when not in use) 5. SDI Input 1. Power Adapter Fastener 2. 5V 1A Power Input 3. Output 4 (Terminator should be applied when not in use) 4. Output 3 (ASI compatible) 5. Output 2 (Terminator should be applied when not in use) 6. Output 1 (ASI compatible) 1. Status Indicator - Turns Green when powered on, turns amber when SDI signal is locked on. DA-8HD TOP VIEW DA-8HD REAR VIEW Troubleshooting Q & A There is no image on my SDI mon- itor. If your source is 1080p, your monitor may only support 1080i, but not 1080p. There is no image on my SDI mon- itor. Check the color of the status indicator. If it is green, it means there is power but no input source is detected. Please check your source. The status indica- tor will turn amber if the source is locked on. There is no image on my SDI mon- itor. The length of your cable may too long. DA-8HD is tested with Belden 1694A, 120 meters for 3G, 140 for HD-SDI. © 2012 APANTAC LLC, All rights reserved 7556 SW BRIDGEPORT ROAD PORTLAND, OR 97224, USA PHONE +1 503 968 3000 FAX +1 503 389 7921 The content of this document is provided in connection with Apantac LLC (“Apantac”) products. Apantac makes no representation or warranties with respect to the accu- racy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice.