Apollo A01/XL2000 Manuals

? 70 Alpha numeric Canned Messages ? 16 Memory Slots ? Back-light Display ? Slide Switch Select Beep or Vibration ? Date and Time Display ? Message Time stamping ? Message Lock ? Erase Message ? Memory Retention ? Lithium Battery Backup ? Reminder Alert ? Low Battery Indicator ? Duplicate Message Features A01/ XL2000 Operation Manual LCD Display Beep Mode Lock Message Clear All Message A,B,C,D, Tone. Duplicate Message Low Battery Indicator Out Of Service Next Page OPERATING YOUR PAGER POWER ON Slide the "A" button to " " or " " to turn on the pager. Slide the "A" button to "O" to turn off the pager. When you turn off the pager, the pager will not receive any messages, but the time and date clock will keep running. Slide the "A" button to select alert mode. " " is set in vibration mode; " " is set in beep mode TURN ON THE BACK-LIGHT FOR LCD Push in the "A" button to turn on the back-light. If you want to turn off the back-light, push the "A" button again or wait 8 second for the automatic turn off. SELECT "VIBRATION" OR "BEEP" MODE READING MESSAGES? When a message is received, the LED will flash and alert by beep or vibration. You will see "1 PAgE" on your LCD. It means you have one message that has not been read. If "2 PAgES" shows, it means there are two unread messages etc.. You push the "C" button to read the messages. PAGE OVER The LCD will show "Page Over" when there are over 16 unread messages. If you do not read the messages and/or delete them then the LCD will read "page over" indicating that you have too many unread messages. MEMORY FULL The LCD will show MEMORY FULL when the pager has 16 read or unread messages total in memory. SETTING TIME & DATE 1. Push the "B" button to show "SET TIME?" on the LCD. 2. Push the "C" button to set the time mode. 3. Push the "C" button to change the number, push the "B" button to move the cursor. When the cursor moves to the end, push the "A" button to save your setting. CLEARING ALL MESSAGES 1. Push the "B" button to show "CLEAr ALL?" And " "on your LCD. 2. Push the "C" button to clear all message that you have read and unlock. This will not clear any unread and locked messages. 3. Push the "A" button to return to stand by and not clear the messages. **If there is no message in your pager then "CLEAr ALL?" would not show on the LCD. LOCKING MESSAGE When you are reading messages, push "B" button and the " " will be appear on the screen to lock the message. HOLD DOWN FULLY When you lock over 8 messages, "HOLD FULL" will display on LCD.