Appro LC-7411 Manuals

Before trying to connect or operate this product, please read this manual completely INSTALLATION & OPERATION MANUAL IP CAMERA LC-7411 / LC-7421 / LC-7431 / LC-7451

The 1.3 Megapixel & WDR IP Box Camera Description of the device 1. Front Panel & Rear Panel 1. Light Sensor: Registers the quality of light in the camera’s environment, and controls the iris shuttle to provide better information concerning the light. 2. MICROPHONE: The IP Camera has an additional audio function. The device has a microphone built into its front panel which records sound. 3. POWER indicator: Indicates the power status of the unit. 4. Plug Inlet: A DC 12V inlet that connects to an external power supply. 5. Plug Inlet: An AC 24V inlet that connects to an external power supply. 6. ETHERNET 10/100 Connector: This is a standard RJ-45 connector for 10/100 Mbps Ethernet networks. PoE (Power over Ethernet) function: Provides power to the device via the same cable as used for the network connection. 7. RESET: Recover to factory default. 8. VIDEO OUT Connector: The connector provides the unit’s composite video signals to a monitor. 9. USB port: The user can use a USB device cable to connect the IP camera to the USB port on the PC. 10. LED indicator: The green light indicates the unit is activating and the SD card cannot be removed. 11. AUDIO IN: The connector is used to connect the audio output from other devices to the camera. 1 3 2 1/4＂-20UNC 12. SD/ SDHC CARD slot: This is used for system software updating and archiving / accessing critical images. 13. ALARM I/O: This is a 6-PIN connector including the ALARM IN/OUT, RS-485, DC OUTPUT and GROUND items for connecting with external devices. 14. AUDIO OUT: Provides the camera’s audio signal to a speaker or stereo. 2. Flank Panel 1. IRIS: Auto iris connector. This camera works with a DC drive auto iris lens. Please refer to the pin assignment marked on the camera when connecting the auto iris lens IRIS 1. AES 2. DC IRIS 3. DHCP 4. STATIC IP 1 2 3 4 1.ALM-OUT A 2.ALM-OUT B 3.ALM-IN + 4.ALM-IN - 5.ALM-RST + 6.ALM-RST - 7.RS-485:D+ 8.RS-485:D- 9.DC-OUT(5V) 10.GND 11.AUDIO-IN 12.AUDIO-OUT 1 2 2. DIP Switch: (1) AES: Auto electric shutter. (2) DC IRIS: Use an auto iris (DC drive) (3) DHCP: Turn On / Turn Off to use the DHCP protocol. If the switch points upwards, the device can obtain an IP address from the DHCP server via the network. (4) STATIC IP: If the switch points down, the device can’t obtain an IP address from the DHCP server. This option is needed to configure the network communication settings. 1 RMN0100440