ARABLE Mark 2 Bridge Manuals

solar cable analog pulse SDI-12 to Mark 2 Scan the QR code for the digital Bridge guide ARABLE BRIDGE FOR MARK 2

Safe removal and storage of your Arable Mark 2 04/2021 Arable Labs. Inc. www.arable.com @ArableLabs Uninstall Mark Remove Mark 2 from mount. Remove the device by loosening the mounting screw and carefully lifting the device off the mounting pole. 1 Undeploy Mark To undeploy, press and hold the top button for 5 seconds. The top four LEDs will begin blinking blue and then turn off one-by-one in a counter-clockwise direction. 2 5 SEC Confirm Undeployment Verify by pressing the top button for 1 second, then check the LED on the bottom of the Mark. If yellow, the device has successfully undeployed. 3 Uninstall Mounting Equipment Remove pole and ground anchor, if using. Don’t forget a metal rod to unscrew the anchor. Make sure to hold on to the eye bolts. 4 Remove Bird Spikes Remove bird-deterrent spikes. Pinch the ends of each spike, and push back through the slots. It may be helpful to have a small pair of pliers nearby. 5 Wipe Clean Clean the exterior of the device with a soft cloth. Take special care with the clear dome and the white area over the spectrometer and radiometers. 6

ARABLE MARK 2 QUICK START GUIDE Languages included in this manual: DE ES FR HU PL PT RU UK 中文