ARB 3432050 Manuals

1 pdf manual(s) ARB 3432050 for free download (Document Types: Fitting instructions manual)

ARB 3432050 Fitting instructions manual [PDF] (6 pages)

  • Identifier: id-1841107
  • Brand: ARB
  • Device: 3432050 Automobile Accessories
  • Type: PDF
  • Key Aspects: Advanced Configuration Methods, FAQ Section for Common Queries, Detailed Installation Instructions
  • UPD Date: 31.08.2026
  • Source File: 1881656.pdf
  • Pages: 6
  • Description: Comprehensive operating guide for the ARB 3432050.
Pages Preview:
  • 25-9-98 Page 2 of 6 3782513 FITTING KIT (TO SUIT BOTH BULL BARS) No. 6171239 PART No QTY DESCRIPTION USE 3500080 1 INDICATOR KIT (contains L and R) TURN SIGNAL INDICATORS 6151017 2 M6 X 16mm BOLT NUMBER PLATE TO BULL BAR 6151046 2 M6 FLAT WASHER 6151128 2 M6 FLANGE NUT 3500200 1 BUFFER KIT RUBBER BUFFER TO BULL BAR 3751627L 1 IMPACT ABSORBER (LHS) IMPACT ABSORBERS AND 3751627R 1 IMPACT ABSORBER (RHS) MOUNT ASSEMBLY TO CHASSIS 5846273 2 CHASSIS PACKER INSID
  • 25-9-98 Page 3 of 6 3782513 TOOLS REQUIRED Basic tool kit, level, tape measure, drill and 1/2” drill bit. FITTING PROCEDURE 1. Disconnect the headlight washers at the T piece by cutting the tube, take care as the T piece is fragile. NOTE: First temporarily block the tube to prevent loss of washer fluid. 2. Remove the bumper bar. 3. Remove the headlight washers and tubing from the bumper bar and fit to the bull bar. Make sure the tubing is fed through the
  • 25-9-98 Page 4 of 6 3782513 B. To place the winch clutch handle in a convenient location, the winch gearbox must be rotated 2 hole spacings, 72 degrees, in a clockwise direction when viewed from the gearbox end. Place the winch on its end and remove all gearbox bolts. Gently raise the gearbox just enough to rotate it. Do not completely remove the gearbox and avoid damaging the gasket. Refit all bolts and tighten. DIAGRAM 2A DIAGRAM 2B DIAG
  • 25-9-98 Page 5 of 6 3782513 to chassis rail width variations packers (numbers: 5846273 & 5846274), with fitting tabs, may need to be inserted between the “Impact Absorbers” and chassis rails. DIAGRAM 3 10. Using a level and a tape measure, adjust both Impact Absorbers so that they are parallel to each other, horizontal, and have an overall width of between 805mm and 808mm, then tighten the bolts. Refer to diagram 4. 11. WINCH BARS ONLY:
  • 25-9-98 Page 6 of 6 3782513 A) Lift the winch into place and using the washers supplied in the fitting kit (3/8” for 8 or 9,000lb and 7/16” for 10,000lb) and the bolts and spring washers supplied with the winch, bolt securely into position. NOTE: The gearbox is on the LHS for the 8 & 9,000 winches and on the RHS for the 10,000lb winch. The winch cable spools from the bottom for all three winches. B) Wire the winch in accordance with the Warn fitting in
Document Preview & Text Transcription (Main Page)
Click to expand and read text
DEC 2001 Page 1 of 6 3782513 If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state. Head Office – ARB Corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807 WA: (08) 9244 3553 NSW: (02) 9821 3633 ACT: (02) 6280 7475 SA: (08) 8244 5001 QLD: (07) 3872 3872 NT: (08) 8947 2262 TAS: (03) 6331 4190 LAND ROVER DISCOVERY No 32/3432050 DELUXE AND WINCH BULL BARS (JANUARY 1995 ONWARD) WARNING FOR VEHICLES EQUIPPED WITH SRS AIRBAG WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT PROTECTION BAR DOES NOT AFFECT OPERATION OF THE SRS AIRBAG. TAKE NOTE OF THE FOLLOWING: • THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE INSTRUCTIONS USING ONLY THE HARDWARE SUPPLIED. • DO NOT USE THIS PRODUCT FOR ANY VEHICLE MAKE OR MODEL, OTHER THAN THOSE SPECIFIED BY ARB. • DO NOT REMOVE LABELS FROM THIS BULL BAR. • THIS PRODUCT OR ITS FIXING MUST NOT BE MODIFIED IN ANY WAY.

ARB 3432050: Automobile Accessories Category Related Instructions

Neoprene Style Seat Cover
4x4 TOUGH Neoprene Style Seat Cover
18.08.2026 4 pages

MODEL: 19-50081 53714 08/2019 1300 883 104 [email protected] www.4x4tough.com.au AIRBAG CERTIFIED NEOPRENE STYLE SEAT COVERS AIRBAG CERTIFIED NEOPRENE STYLE SEAT COVERS INSTRUCTIONS AND PURCHASE REGISTRATION Product documentation for the 4x4 TOUGH Neoprene Style Seat Cover Automobile Accessories. It explains troubleshooting and operating guidelines, maintenance guidelines, network configuration.

LED Mirror-Beam MBLT98
Whelen Engineering Company LED Mirror-Beam MBLT98
23.04.2026 4 pages

Page 1 Installation Guide: LED Mirror-Beam™ Models: MBLT98, MBMT98 and MBPS00 1992-98 Chevy Tahoe & Suburban ©1999 Whelen Engineering Company Inc. Form No.13448J (121606) For warranty information regarding this product, visit www.whelen.com/warranty • P Reference manual for the Whelen Engineering Company LED Mirror-Beam MBLT98 Automobile Accessories. It describes maintenance tasks and usage procedures, device features, system checks.

Quick-Fit
Heritage Quick-Fit
13.06.2026 2 pages

Instructions: Quick-Fit Bench Seat Cover Mode d’emploi: Protecteur de banquette à installation rapide P E D I G R E E S E R I E S Contents: Contenu: 4 3 Attach strap around headrest • Fixez les sangles en les passant autour de l'appui-tête Installation Device guide for the Heritage Quick-Fit Automobile Accessories. It offers details on menu navigation, technical specifications, maintenance guidelines, safety protocols.

45-3550
Westin 45-3550
19.04.2026 2 pages

INSTRUCTIONS—INSTRUCCIONES—CONSIGNES Westin Automotive Products, Inc. 5200 N. Irwindale Ave. Ste 220 Irwindale, Ca 91706 Thank You for choosing Westin products For additional installation assistance please call Customer Service (800)793-7846 AUTOMOTIVE PR Product operation manual for the Westin 45-3550 Automobile Accessories. The manual elaborates on features and technical specifications, hardware components, energy usage.