ARB 3444070 Manuals

1 pdf manual(s) ARB 3444070 for free download (Document Types: Fitting instructions)

ARB 3444070 Fitting instructions [PDF] (4 pages)

  • Identifier: id-1841104
  • Brand: ARB
  • Device: 3444070 Automobile Accessories
  • Type: PDF
  • Key Aspects: Periodic Inspection Checklists, Basic Configuration Guidelines, Critical Operational Precautions
  • UPD Date: 13.07.2026
  • Source File: 1881659.pdf
  • Pages: 4
  • Description: Comprehensive instruction manual for the ARB 3444070.
Pages Preview:
  • 6-5-99 Page 2 of 4 3782586 BULL BAR FITTING KIT No 6171299 USE PART No QTY DESCRIPTION CHASSIS BRACKET TO 3751747R 1 CHASSIS BRACKET (RHS) VEHICLE 3751747L 1 CHASSIS BRACKET (LHS) 6151096 4 M12 X 40mm BOLT 4581050 4 M12 SPRING WASHER 4581049 4 M12 FLAT WASHER 6151135 2 M12 NUT 4581057 2 CRESCENT MOON WASHER 4581008 2 OFFSET WASHERS 5846277 4 PACKER PIN BULL BAR TO VEHICLE 6151087 2 M10 X 25mm BOLT 4581040 4 M10 FLAT WASHER 4581048 2 M10 SPRING WASHER 6151
  • 25/1/02 Page 3 of 4 3782586 DIAGRAM 1 DIAGRAM 2 3. To place the winch motor in the correct location the winch motor must be rotated 90 degrees, in a clockwise direction when viewed from the motor end. Place the winch on its end and remove the two motor retaining bolts. Gently raise the motor just enough to rotate it. Do not completely remove the motor and avoid damaging the gasket. Refit all bolts and tighten. (Refer to diagram 2.) 4. The roller fairlead m
  • 25/1/02 Page 4 of 4 3782586 FITTING THE BULL BAR TO THE VEHICLE 10. Remove the bumper from the vehicle. 11. Fit the chassis brackets (Part No. 3751747 L&R) to both sides of the vehicle using two M10 x 25mm bolts and four M12 x 40mm bolts, crescent moon washers, offset washers, flat washers, spring washers and nuts. (Refer to diagram 4.) Fit two 6mm spacers between inside of chassis bracket and on outside of vehicle chassis rail and align with 12mm captive
Document Preview & Text Transcription (Main Page)
Click to expand and read text
27/10/05 Page 1 of 4 3782586 ARB WINCH BULL BAR TO SUIT HOLDEN JACKAROO STD, SE & MONTEREY 1998-2001 HOLDEN JACKAROO STD 2001 ON No 3444060 ARB WINCH BULL BAR TO SUIT HOLDEN JACKAROO WIDE BODY SE & MONTEREY 2001 ON No 3444070 WARNING FOR VEHICLES EQUIPPED WITH SRS AIRBAG WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT PROTECTION BAR DOES NOT AFFECT OPERATION OF THE SRS AIRBAG. TAKE NOTE OF THE FOLLOWING: • THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE INSTRUCTIONS USING ONLY THE HARDWARE SUPPLIED. • DO NOT USE THIS PRODUCT FOR ANY VEHICLE MAKE OR MODEL, OTHER THAN THOSE SPECIFIED BY ARB. • DO NOT REMOVE LABELS FROM THIS BULL BAR. • THIS PRODUCT OR ITS FIXING MUST NOT BE MODIFIED IN ANY WAY.

ARB 3444070: Automobile Accessories Category Related Instructions

PY0105P
Peiying PY0105P
01.05.2026 40 pages

Owner’s manual Instrukcja obsługI bedIenungsanleItung manual de utilizare DE EN PL RO ReaR view cameRa in licence plate fRame with paRking sensoRs py0105p Product usage guide for the Peiying PY0105P Automobile Accessories. The manual elaborates on features and service procedures, device instructions, internal layout, hardware instructions.

MIR-ACT
CrimeStopper MIR-ACT
23.04.2026 40 pages

1230-62520-01-B Rear View Mirror CONGRATULATIONS on your choice of a CrimeStopper Universal Rear View Mirror. This booklet contains all of the necessary information for connecting and using your mirror. If any questions should arise, contact your installation User support manual for the CrimeStopper MIR-ACT Automobile Accessories. This guide explains the features and calibration steps, connectivity options, firmware installation, repair references.

ProClip 855038
Brodit ProClip 855038
10.08.2026 2 pages

29 January, 2015, www.brodit.com, © 2015 Brodit AB Product 855038 855038 ProClip Center mount The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Reference manual for the Brodit ProClip 855038 Automobile Accessories. It outlines the setup and software configuration, regulatory notices, device calibration.

K891W
Whispbar K891W
17.08.2026 15 pages

K891W Fitting Kit EN Fitting Instructions for Basic Carrier x 1 x 1 x 1 x 1 x 1 x 1 x 1 x 1 x 2 x 2 Revision No: 3C 1 User support manual for the Whispbar K891W Automobile Accessories. It explains maintenance and system checks, error handling, wiring setup.