Arkray Glucocard 01 Manuals

Code No. (F-2, 3 or 4) Expiration date F- 4 7 0018 F-4 QUICK START • If Test Averaging has been turned on, the average result will appear first. mg/dL mg/dL mg/dL mg/dL Orange/Up Arrow Gray/Down Arrow 1. Performing a Blood Glucose Test 2. Recalling Results/Entering Memory Mode Step 1: Insert test strip as shown in diagram. A beep will sound and the meter will turn on automatically. Verify that all symbols appear on the screen. Step 2: The beep will sound again. The Apply Blood symbol and the code number (F-2, F-3, or F-4) will alternate on the screen. Verify that the code number on the screen matches the code number printed on the bottle. Step 3: Obtain a blood drop. Apply blood to the end of the test strip. Capillary action will pull the blood into the strip. The meter will beep when it detects that blood has been applied. If it takes longer than 20 seconds to obtain a blood sample and to touch the test strip to the blood drop, repeat Step 3. Do not add blood on top of the test strip, as you may receive an inaccurate result. Step 4: The meter counts down and displays result in 7 seconds. The result is stored in memory. The GLUCOCARD™ 01 stores up to 360 test results. When more than 360 test results have been performed, the meter drops the oldest result each time you add a new result. Step 1: Press the Orange/Up Arrow button for 2 seconds. A beep sounds and the test meter turns on. The meter next shows the year, date, and time. After 2 seconds, either the Test Average or the most recent test result will appear. • If Test Averaging has been set to “Off”, the display will briefly flash the number “1” at the bottom of the screen. Then, the most recent test result appears with the date and time of the test. “MEM” will display at the top of the screen. Step 2: Press the Orange/Up Arrow button to scroll through memory. Press and hold the Orange/Up Arrow button to move through the results quickly. Press the Gray/Down Arrow button to move backwards through results in memory. Either “14d” or “30d”will show at the bottom of the screen for either a 14-day or 30-day average. “AVE” will appear above “14d” or “30d”.