Artecta POWERdrive 45D Manuals

Architainment A9950040 POWERdrive DC45W Constant Current RGB(W) LED driver/controller The POWERdrive 45D is a highly integrated, enclosed and easy-to-configure constant current driver/ controller with multiple current sources for high-brightness, indoor LED lighting applications requiring up to 45 watts 200mA-500mA. The POWERdrive 45D can be integrated in a network or used as standalone devices and is DMX, DALI and LedSync compatible, the latter allowing 15-bit dimming and colour control and bidirectional communication for driver configuration and temperature readout. Technical specifications: LED current settings:200-500mA (in 50mA steps) Power output range: 0-45 Watt Operating supply: 12V-32V DC (Efficiency up to 95%) Current max.: 2.2A Independed LED groups: up to 4 Environmental rat.: Ta range: -20°C to +50°C (-4°F to +122°F) Tc max. 65°C (149°F) T heatsink max: 60°C (140°F) Cooling: Passive (integrated heat spreader) Relative huminity: non condensing Network input: USITT DMX-512, LedSync Network output: USITT DMX-512, LedSync Network resolution: 8 bit (4 Network channels used by driver) or 16 bit (8 Network channels used by driver) Certifications: CE: IEC 61347, EN 55015, IEC61003, EN 61547 Mode Settings: Color (stand-alone with speed and intensity), Show (9-20 sequences), DMX DMX control mode: a. 1-1L 1-DMX-channels for LED group 1) (group 2+3+4 are disabled) b. 2-2L 2-DMX-channels for LEDgroup 1+2) (group 3+4 are disabled) c. 3-3L 3-DMX-channels for LED group 1+2+3) (group 4 is disabled) d. 4-4L 1-DMX-channels for LED group 1+2+3+4) e. 2-4L 2-DMX-channels for 2 LED groups 1+2 & 3+4) f. 1-4L 1-DMX-channels (4 groups 1+2+3+4) g. RGB 3-DMX-channels for 3 LED groups (Red & Green & Blue) h. RGBW 4-DMX-channels for 4 LED groups (Red & Green & Blue & White) i. RGBA 4-DMX-channels for 4 LED groups (Red & Green & Blue & Amber) j. RRGB 3-DMX-channels for 4 LED groups (2x Red & Green & Blue) k. RGGB 3-DMX-channels for 4 LED groups (1x Red & 2x Green & 1xBlue) l. CCWW 2-DMX-channels for 4 LED groups (2x same color & 2x White) m. CWWW 2-DMX-channels for 4 LED groups (1-group & 3-groups) KG 0.196 Dimensions Class III IP-20 L W 50 mm H 23 mm 192 mm Operat. Power Class 12-32V DC Dimensions in mm 50 23 192 150 30 Bottom view Mounting: 4x M4 screws M + - LED technology THE ART OF LIGHTING 12V-32V DC IN POWERdrive 45D VDC- VDC+ Ext IN + Ext IN - DMX IN + DALI IN + DALI OUT + DALI IN - DALI OUT - DMX IN - DMX IN shield LED-Sync OUT + LED-Sync OUT - LED-Sync shield Group NTC+ NTC- 1+ 2+ 3+ 4+ 1- 2- 3- 4- 12-32V / 45W Constant current LED driver Quick Start Guide POWERdrive 45 Connecting and configuring the POWERdrive 45 A Removing the cover B Removing the strain reliefs C Connecting LED wires D Connecting power supply wires E Optional: Connecting external control device or network cabling F Fastening the strain reliefs G Configuring the ECOdrive 1 2 ECOdrive Intelligent LED Driver/Controller IEC61347 EN55015, IEC61003, EN61547 130 M SELV-equivalent : 96% typ t a: -20°C to + 50°C : +65°C Tc Ext in + Ext in DMX in + DMX in - DMX in shield LedSync thru + LedSync thru - TC NTC NTC ECOdrive 45D - 12-32V / 45W Constant current LED driver 1 2 3 4 Group Group Group Group TC NTC NTC COdrive 45D 45W Constant current LED driver 1 2 3 4 Group Group Group Group 1 2 2 Ext in + Ext in DMX in + DMX in - DMX in shield LedSync thru + LedSync thru - LedSync shield - TC 1 2 3 4 Group Group Group Group M 1 2 Ext in + Ext in DMX in + DMX in - DMX in shield LedSync thru + LedSync thru - LedSync shield - M 1 Ext in + Ext in DMX in + DMX in - DMX in shield LedSync thru + LedSync thru - TC NTC NTC ECOdrive 45D - 12-32V / 45W Constant current LED driver 1 2 3 4 Group Group Group Group Ext in + Ext in DMX in + DMX in - DMX in shield LedSync thru + LedSync thru - LedSync shield TC NTC NTC ECOdrive 30D - 12-32V / 30W Constant current LED driver 1 2 3 4 Group Group Group Group Constant current LED Driver Quick Start Guide POWERdrive 45 Constant current LED Driver Manual configuration 1. Select mode of operation: 2. Set LED current and LED groups: 3. Standalone Standalone Networked operation or operation or operation - Colour*- - Show - - DMX or DALI - * The colour menu depends on the LED group settings you have selected in step 2. M SHOW display off COLR DMX DALI (5 sec) M + - / Set mode MODE SET M CUR1 M M + - / + - / Group 1 output current Group 2 output current CUR2 + 200 mA + 50 mA 200 mA + 50 mA M + - / CUR3 200 mA + 50 mA M + - / 200 mA + 50 mA M + - / LED groups LED 1-1L 2-2L 3-3L 4-4L 2-4L 1-4L RGB RGBW RGBA RRGB RGGB M + - / NTC temperature 0-150°C TEMP Group 3 output current Group 4 output current CUR4 + CCWW CWWW OFF POTM 10V SWIT display off M + - / External input EXT INP + - / LOG LIN Dimming curve M DIM CURV + - / OFF VID COLR WHIT GLOW M M M M + - / + - / 1...512 Network resolution DMX address 8 BT 16 BT ADDR DMX RES NETW Interpolation + - / AUTO MANU display off M NETW Network setup SET + - / YES NO DMX termination TERM M INTERPOL 00...20 M display off SHOW M M M -99...99 0...255 + - / + - / + - / Intensity Speed Show SPD INT M HUE M HUE White WHIT M M + - / Intensity 0...255 INT display off + - / 0...1535 + - / 0...255 M ADDR NO SET ADDR M M display off Nr. of ballasts No address Address set X BAL M Other features Locking the configuration Visual test run Reset to factory defaults + - / display off M LOCK M + Lock driver (5 sec) + NO SOFT HARD M display off TEST - + Test + + R 1 sec G 1 sec B 1 sec W 1 sec RGBW 1 sec R 1 sec G 1 sec B 1 sec W 1 sec RGBW 1 sec M display off RE - SET - + Reset + + (5 sec) M Press menu PRES MENU