Ashly MX-406 Manuals

MX-406 Stereo Microphone/Line Mixer Operating Manual ASHLY AUDIO INC. 847 Holt Road Webster, NY 14580-9103 Phone: (585) 872-0010 Toll-Free: (800) 828-6308 Fax: (585) 872-0739 www.ashly.com

All Rights Reserved MX-406 Stereo Microphone/Line Mixer Operating Manual Ashly Audio Inc. 847 Holt Road, Webster, NY 14580-9103 Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739 www.ashly.com All Trademarks referred to herein, are the property of their respective owners. R-042707

MX-406 Stereo Microphone/Line Mixer Operating Manual ASHLY AUDIO INC. 847 Holt Road Webster, NY 14580-9103 Phone: (585) 872-0010 Toll-Free: (800) 828-6308 Fax: (585) 872-0739 www.ashly.com

MX-406 Stereo Microphone/Line Mixer Operating Manual ASHLY AUDIO INC. 847 Holt Road Webster, NY 14580-9103 Phone: (585) 872-0010 Toll-Free: (800) 828-6308 Fax: (585) 872-0739 www.ashly.com
                     
                             !    "#  
                           $%&  %% '(            
                    
 $%& 
                    
! $%& 
                    
" $%& 
                    
# $%& 
                    
$ $%&                    )% *+, )% *+, )% *+, )% *+, )% *+, )% *+,

MX-406 The unit shall be a six input stereo mixer having separate balanced outputs for both left and right channels. There shall be a transformer balanced mono-summed output with separate front panel level control. Each input channel shall have level and stereo-balance controls on one concentric pot. An Aux send shall be on each channel factory wired pre-fader /EQ. The Aux send shall be configurable for Pre/Post EQ via circuit board jumper connection. Each input channel shall have a two-band equaliza- tion control on one concentric pot located on the front panel. The equalization shall consist of high and low shelving points being fixed at 70Hz and 8KHz with a cut/boost range of +/- 12dB. Each input channel shall have 40dB of available attenuation on the front panel, as well as a 20dB mic input pad on the rear panel. Each input channel shall have an in/out insert point on a single TRS 1/4” phone connection, and a combination 1/4”-- XLR con- nector for balanced microphone and line input sources. Phantom power of +48VDC for each input must be available via a single rear panel switch. There shall be one Master Aux Output control provided on the front panel. A 1/4” TRS Aux Master Output Jack shall be located on the rear panel. There shall be an additional stereo CD/Tape input on RCA jacks with level control. Separate stereo RCA tape outputs must also be provided. A TRS 1/4” Headphone Output and Level Control to monitor both Left and Right must be provided on the front panel. Overall gain available from Mic Input to Master Output shall be 84dB, and the Mono Output level shall be +23dBu into 600 ohms. There shall be an eleven stage LED ladder output VU meter located on the front panel indicating signal levels from -21VU to +6VU and clip when the signal level is 3dB below actual clipping. Each individual channel shall have a clip indicator as well. The mixer unit shall be no higher than two rack spaces and must be fully covered under a five year warranty. The mixer shall have an internal power sup- ply with the power switch located on the rear panel. The mixer must be manufactured in The United States of America, with a shipping weight of 15 pounds. The mixer shall be the model MX-406, manufactured by Ashly Audio, Inc. No other unit shall be acceptable unless data submit- ted from an independent test laboratory verifies that the above size/performance specifications are met. Features: • Six Balanced 1/4” - XLR Inputs • Low-Noise Mic Preamp Circuitry • High Gain (92dB Channel Input to Program Output) Ensures Full Output with Low Level or Distant Mics • Two-Band EQ on Each Input • Input Level and Pan Controls on Each Input • Clip LED’s on Each Input • Eleven-Step LED Output Level Metering • 48V Phantom Power for Condenser Mics • Six Channel Inserts • Aux Send Controls • Balanced 1/4” Stereo Outputs • Transformer Balanced XLR Mono Output • Stereo Headphone Jack with Level Control • Auxiliary Tape/CD Inputs and Outputs • Three Position Input Gain Switch • 20dB Microphone Pad Switch • Stereo Aux Input Control • Aux Master Output Control • Internal Power Supply • Safety/Compliance: cTUVus/CE, RoHS Technical Notes & Specifications MX-406 Six Input Stereo Mic/Line Mixer Architects Specifications