Asus ZenWiFi XP4 Manuals

ASUS ZenWiFi XP4 AX1800 + AV1300 Dual-band Powerline Mesh WiFi6 System Model: XP4R/XP4N Quick Start Guide Hardware Explanations ZenWiFi XP4 Overview WAN port Connect your modem to this port with a network cable. LAN ports 1-2 Connect your PC to a LAN port with a network cable. ASUS Router App AiMesh Setup Steps Download free ASUS Router APP to set up and manage your router(s). 01 Find your AiMesh router and AiMesh node, and place them within 3 meters of each other during the setup process. Connect your AiMesh router to the AiMesh node via the following ways. 02 03 Specifications AC power connector Reset button LAN ports 1-2 WAN port USB 3.1 Gen 1 port AC power connector Reset button LAN ports 1-2 XP4R XP4N AC power connector Connect one end of the bundled power cord to this connector and the other end to a wall socket. Reset button Press this button to reset or restore the system to its factory settings. USB 3.1 Gen 1 port Insert a USB 3.1 Gen 1/ USB 2.0 device such as a USB disk or USB 3G/4G modem into this port. XP4R/XP4N WPS/PLC combo button WPS/PLC combo button Press this button to start WPS or PLC pairing. WPS pairing: Press the buttons on one of XP4 devices and a new wireless client to establish WiFi connection. PLC pairing: Press the buttons on one of XP4 devices in the existing Mesh System and a new XP4 device. After a short time, the new XP4 device will be integrated into your existing Mesh System. Solid blue Your AiMesh router or node is ready for setup. Solid white Your AiMesh router or node is online and works well. Solid amber The signal between your AiMesh router and the node is weak. Solid red Your AiMesh router has no Internet connection. Your AiMesh node is disconnected from the router. Blinking blue Your AiMesh router is applying new settings. Blinking amber Your AiMesh router or node is resetting. Solid purple Your AiMesh router or node is in rescue mode. Solid green Your AiMesh router or node is switching to another channel caused by system rebooting or radar signals detected on the current channel. ZenWiFi Hybrid XP4 LED indications A. WiFi Backhaul connection (Skip to Step 02). B. Ethernet Backhaul connection: Connect an Ethernet cable from the LAN port of the AiMesh router to the LAN port of the AiMesh node. C. Powerline Backhaul connection (Skip to Step 02). AiMesh Router AiMesh Node LAN B C A Power Power Connect the AiMesh router and AiMesh node to wall sockets using the bundled power cords. NOTES: • Do not use power extension cords to avoid degrading HomePlug signal and reducing data transfer speeds. • To minimize powerline interference, connect the power cords to wall sockets directly. • Plug the power cords to 3-prong outlets instead of 2-prong ones for higher data transfer speeds. Use a network cable to connect your modem to the WAN port of the AiMesh router. 04 Wait until both LEDs turn solid blue indicating that devices are ready for the setup. 05 Enable Bluetooth on your phone and launch ASUS Router APP, and then follow the onscreen instructions to finish the AiMesh setup. NOTES: • By default, the AiMesh router is paired with the AiMesh node, allowing you to quickly complete the setup. If the auto pairing during the initial installation fails, you can manually pair the AiMesh router with the node by launching ASUS Router App or pressing the WPS/PLC combo button. • To set the AiMesh router as the access point mode, go to web GUI (http://router. asus.com), and go to the page Administration > Operation Mode. E16714 / First Edition / August 2020 AC Power input 100 - 240V AC +50/60Hz, 1A Operating Temperature 0~40oC Storage 0~70oC Operating Humidity 50~90% Storage 20~90%