AT&T CL84350 Manuals

Telephone base installation This quick start guide provides you with basic instructions only. For more detailed instructions, refer to your Abridged user’s manual provided in the package, or see the online Complete user’s manual at www.telephones.att.com/manuals. Battery installation Install the battery as shown below. Charge your handset(s) before initial use. The battery is fully charged after 16 hours of continuous charging. Quick start guide CL84100/CL84200/CL84250/CL84300/CL84350 Use only the supplied rechargeable battery or replacement battery (model BT166342). Caution: Use only the power adapter provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Quick reference guide - handset Step 1 Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label. Insert the supplied battery with the label THIS SIDE UP facing up as indicated. Step 2 Align the cover flat against the battery compartment, then slide it upwards until it clicks into place. Step 3 Charge a cordless handset by placing it face forward in the charger. The CHARGE light on the top of the handset is on during charging. CHARGE light CHARGE indicator On when the handset is charging. • /SPEA�ER SPEA�ER Press to switch between the speakerphone and the handset. • # (pound key) Press repeatedly to display other dialing options when reviewing a caller ID log entry. • OFF/CLEAR During a call, press to hang up. While in a menu, press to cancel an operation, back up to the previous menu, or exit the menu display. Press and hold while the telephone is not in use to erase the missed call indicator. • • • MENU/SELECT When the handset is not in use, press to show the menu. While in the menu, press to select an item or save an entry or setting. • • pDIR/VOLUME+ Press pDIR to show directory entries when the handset is not in use. Press to scroll up while in menus. While entering names or numbers, press to move the cursor to the right. Press to increase the listening volume when on a call, or to increase the message playback volume. • • • • TONE Press to switch to tone dialing temporarily during a call if you have pulse dialing. • REDIAL/PAUSE Press repeatedly to view the last 20 numbers dialed. While entering numbers, press and hold to insert a dialing pause. • • EQ During an outside call, intercom call, message or announcement playback, press to change the audio quality to best suit your hearing. • 1 While reviewing a caller ID log entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory. • MUTE/DELETE During a call, press to mute the microphone. While reviewing the caller ID history, the directory or the redial memory, press to delete an individual entry. While predialing, press to delete digits. • • • PHONE/FLASH Press to make or answer a call. During a call, press to answer an incoming call when you receive a call waiting alert. • • qCID/-VOLUME Press qCID to show caller ID history when the handset is not in use. Press to scroll down while in menus. While entering names or numbers, press to move the cursor to the left. Press to decrease the listening volume when on a call, or to decrease the message playback volume. • • • • Initial settings We recommend you program your telephone system before use. The following are a few examples of common features to set before using the telephone. Refer to the Handset and telephone base settings and Answering system settings in the Abridged user’s manual or the online Complete user’s manual for detailed instructions on setting all telephone features. Set date/time Set the date/time before using the answering system. Using a cordless handset or the telephone base: 1. MENU -> q or p -> Settings -> SELECT. 2. q or p -> Set date/time -> SELECT. 3. q or p -> Date & time -> SELECT. 4. Enter the month, day and year using the dialing keys -> SELECT. 5. Enter the hour and minute using the dialing keys. 6. q or p to choose AM or PM -> SELECT. Record your own announcement Your outgoing announcement plays when calls are answered by the answering system. You can use the preset announcement to answer calls, or replace it with your own recorded announcement. Using a cordless handset or the telephone base: 1. MENU -> q or p -> Answering sys -> SELECT. 2. SELECT to select Announcement. 3. Press 7. After the tone, speak towards the handset or telephone base to record your announcement. 4. Press 5 to end recording. Number of rings You can set the answering system to answer an incoming call after two, four, or six rings, or toll saver. If you choose toll saver, the answering system answers a call after two rings if you have new messages, or after four rings when there are no new messages. If you want the built-in answering system instead of the voicemail to answer a call, you should set the answering system to answer a call at least two rings before the voicemail is set to answer. Contact your telephone service provider for information on your voicemail settings. Using a cordless handset or the telephone base: 1. MENU -> q or p -> Answering sys -> SELECT. 2. q or p -> Ans sys setup -> SELECT. 3. q or p -> # of rings -> SELECT. 4. q or p -> Choose among 2, 4, 6 or Toll Saver -> SELECT. Ringer volume You can set the ringer volume level to one of the six levels or turn the ringer off. Using a cordless handset or the telephone base: 1. MENU -> q or p -> Ringers -> SELECT. 2. SELECT to select Ringer volume. 3. q or p to choose the desired level -> SELECT. Language If you want to change the display language, or you have accidentally changed the language and want to switch it back to English, follow the below steps. Using a cordless handset or the telephone base: 1. MENU -> q 5 times -> SELECT twice. 2. q or p to choose the desired language, or choose English if you want to change the display language to English -> SELECT. PRESS TO RELEASE PRESS TO RELEASE Plug the small end of the AC power adapter into the power jack on the bottom of the telephone base. • Plug one end of the telephone line cord into the telephone jack on the bottom of the telephone base. • Place the cords into the channels. • Plug the other end of the telephone line cord into a telephone jack or a DSL filter. • Plug the other end of the coiled handset cord into the jack at the left side of the telephone base. • Raise the antenna. • Plug the large end of the AC power adapter into a power outlet not controlled by a wall switch. • If you have DSL high-speed Internet service, a DSL filter (not included) is required. INT Press to begin an intercom conversation or to transfer a call. • Handset Handset side view IN USE indicator On when the telephone is in use, or when the answering system is answering an incoming call. On during the handset registration process. Flashes when another telephone is in use on the same line. Flashes when there is an incoming call or when the system is deregistering handset(s). LOCATOR When the phone is idle, press to page all handsets. FLASH During a call, press to answer an incoming call when you receive a call waiting alert. CANCEL While using menus, press to cancel an operation, back up to the previous menu or exit the menu display. q/CID Press when the phone is idle to display the call history. Press to scroll down while in menus and lists. While entering numbers or characters, press to move the cursor to the left. MENU/SELECT Press to show the menu. While in the menu, press to select an item or save an entry or setting. p/DIR Press when the phone is idle to display the directory. Press to scroll up while in menus and lists. While entering or modifying names, press to move the cursor to the right. INTERCOM When the phone is idle, press to initiate an intercom call. /ANSWER ON Press to turn the built-in answering system on or off. /PLAY/STOP Press to start or stop message playback. Flashes when there are new messages or memos in the answering system. X/DELETE Press to delete the message currently playing. When in idle mode, press twice to delete all old messages. /REPEAT Press to repeat the message; press twice to play the previous message. /S�IP Press to skip the message. qp/VOLUME During message playback, press to adjust the listening volume. While in idle mode, press to adjust the base ringer volume. REDIAL/PAUSE Press to access the last 20 numbers dialed. While predialing or entering numbers into your directory, press and hold to insert a dialing pause. MUTE Press to turn off the microphone; press again to resume your conversation. SPEA�ER Press to switch between speakerphone and corded handset. TONE If you have pulse dialing, press during a call to switch to tone dialing temporarily. Quick reference guide - telephone base Telephone base Charger installation Plug the large end of the AC power adapter into a power outlet not controlled by a wall switch. •

User’s manual CL84100/CL84200/ CL84250/CL84300/ CL84350 DECT 6.0 corded/cordless telephone/answering system with caller ID/call waiting