AT&T TL96271 Manuals

User’s manual TL90031/TL90041/TL90051/ TL90061/TL90071 DECT 6.0 expansion handset for use with AT&T models TL92271/TL92321/TL92371/ TL92421/TL92471/TL96151/ TL96271/TL96371/TL96451/ TL96471 with B�U��OO�H® �����������c�����gy BLUETOOTH®������������c�����gy wireless technology

Telephone base and charger installation This quick start guide provides you with basic instructions only. For more complete instructions, refer to your user’s manual provided in the package, or see the online user’s manual at www.telephones.att.com/manuals. Battery installation Install the battery as shown below. Charge your handset(s) before initial use. The battery is fully charged after 16 hours of continuous charging. Quick start guide TL96151/TL96271/TL96371/TL96451/TL96471 Use only the supplied rechargeable battery or replacement battery (model BT166342). Caution: Use only the power adapter provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Quick reference guide - handset Raise the antenna. Plug the power cord and the telephone line cord into the jacks. Route the power adapter cord through this slot. Plug one end of the telephone line cord into a telephone jack or a DSL filter. A DSL filter (not included) is required if you have DSL high-speed Internet service. The DSL filter must be plugged into the telephone wall jack. Route the telephone line cord through this slot. Step 1 Plug the battery connector securely into the socket inside the handset battery compartment. Insert the supplied battery with the label THIS SIDE UP facing up as indicated. Step 2 Align the cover flat against the battery compartment, then slide it upwards until it clicks into place. Step 3 Charge the handset by placing it face forward in the telephone base or charger. The CHARGE light on the top of the handset is on during charging. CHARGE light PUSH TO TALK Press to display the PTT menu to begin a PTT call. Press and hold to begin a one-to-group broadcast when the handset is not in use. • • Initial settings We recommend you program your telephone system before use. The following are a few examples of common features to set before using the telephone. Refer to the Handset and telephone base settings and Answering system settings in the user’s manual for detailed instructions on setting all telephone features. Set date/time Set the date/time before using the answering system. Using a cordless handset or the telephone base: 1. MENU -> q or p -> Set date/time -> SELECT. 2. Enter the month, day and year using the dialing keys -> SET. 3. Enter the hour and minute using the dialing keys. 4. q or p to choose AM or PM -> SET. Record your own announcement Your outgoing announcement plays when calls are answered by the answering system. You can use the preset announcement to answer calls, or replace it with your own recorded announcement. Using a cordless handset or the telephone base: 1. MENU -> q or p -> Answering sys -> SELECT. 2. SELECT to select Announcement -> RECORD. 3. Facing the handset or telephone base, record your announcement and press STOP to end recording. Number of rings You can set the answering system to answer an incoming call after 2, 3, 4, 5 or 6 rings, or toll saver. If you choose toll saver, the answering system answers a call after two rings if you have new messages, or after four rings when there are no new messages. If you want the built-in answering system instead of the voicemail to answer a call, you should set the answering system to answer a call at least two rings before the voicemail is set to answer. Contact your telephone service provider for information on your voicemail settings. Using a cordless handset or the telephone base: 1. MENU -> q or p -> Answering sys -> SELECT. 2. q or p -> Ans sys setup -> SELECT. 3. q or p -> # of rings -> SELECT. 4. q or p -> choose among 6, 5, 4, 3, 2 or Toll saver -> SET. Ringer volume You can set the ringer volume level to one of the six levels or turn the ringer off. Using a cordless handset or the telephone base: 1. MENU -> q or p -> Ringers -> SELECT. 2. SELECT to select Ringer volume. 3. q or p -> All lines, Home, Cell-D1 or Cell-D2 -> SELECT. 4. q or p to choose the desired level -> SET. Quick reference guide - telephone base Plug the power adapter into a power outlet not controlled by a wall switch. Softkeys (2) Show the menu. Select an item or save an entry or setting. CHARGE light On when the handset is charging. CELLULAR Make or answer a cell call. Answer a call waiting call during a cell call. HOME/FLASH Make or answer a home call. Answer a call waiting call during a home call. 1 Press repeatedly to add or remove 1 in front of the call log entry before dialing or saving it to the directory. TONE Switch to tone dialing temporarily during a call if you have pulse service. Toggle the name order when saving a caller ID log entry into directory. /SPEAKER Make or answer a home or cell call using the speakerphone. Switch between the speakerphone and the handset. REDIAL/PAUSE Press repeatedly to view the last 10 numbers dialed. Press and hold to insert a dialing pause while entering numbers. EQ During an outside call, intercom call, message or announcement playback, press to change the quality of the audio to best suit your hearing. • • • • • • • • • • • • • • • DIR /VOLUME Scroll up in menus. Increase listening volume when on a call or message playback. Show directory entries. Move the cursor to the left while entering names or numbers. MUTE/DELETE Mute the microphone during a call. Delete digits while predialing. Delete an individual entry while reviewing the redial list, directory or caller ID history. Erase a digit or character while entering or editing a directory entry. Silence the ringer temporarily. Delete a message or announcement during message or announcement playback. OFF/CANCEL Cancel an operation, back up to the previous menu, or exit the menu display while using menus. Press and hold to return to idle mode. Hang up a call. Press and hold to erase all the Missed calls or Download fail messages. Silence the ringer temporarily. CID /VOLUME Scroll down in menus. Decrease listening volume when on a call or message playback. Show caller ID history. Move the cursor to the right while entering names or numbers in the directory. # (pound key) Press repeatedly to display other dialing options when reviewing a caller ID history entry. • • • • • • • • • • • • • • • • • • • • VOLUME Adjust the volume during message playback. Adjust the volume during a call. Adjust the telephone base ringer volume for all lines when in idle mode. • • • TONE Switch to tone dialing temporarily during a call if you have pulse service. • REDIAL/PAUSE Press repeatedly to view the last 10 numbers dialed. While entering numbers, press and hold to insert a dialing pause. • • /HANDSET LOCATOR Press the button to page all system handsets. Press and hold to begin handset deregistration. • • PTT Display the PTT menu to begin a PTT call. Press and hold to begin a one-to- group broadcast when the handset is not in use. • • 1 While reviewing a caller ID history entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in a directory. • CANCEL While in a menu, press to exit without making changes or press and hold to return to idle mode. Press and hold to erase the displayed messages. • • DEVICE 1/DEVICE 2 lights On when the telephone base is paired and connected with a Bluetooth device. • CID Press to scroll down while in a menu. Press to review the caller ID log. While entering names or numbers, press to move the cursor to the left. • • • DIR Press to scroll up while in a menu. Press to show directory entries when the telephone is not in use. While entering names or numbers, press to move the cursor to the right. • • • Softkeys (2) Press to select the menu item displayed above the key. • /SKIP Press to skip to the next message. • /REPEAT Press to repeat a message or press twice to play the previous message. • /ANS ON Press to turn the answering system on or off. • /PLAY/STOP Press to start or stop message playback. • DELETE/X Press to delete the message currently playing. Press twice to delete all previously reviewed messages. While entering names or numbers, press to delete a digit or a character. While reviewing the redial list, directory or caller ID history, press to delete an individual entry. • • • • HOME (Speakerphone) Press to make or answer a home call. • FLASH Answer a call waiting call during a call. • MUTE Mute the microphone during a call. Silence the ringer temporarily. • • CELLULAR Make or answer a cell call. Answer a call waiting call during a cell call. • • HEADSET Transfer a call from the telephone base to a connected Bluetooth headset. Press to use a connected Bluetooth headset. Press to end a call while you are using the Bluetooth headset. • • •

Quick start guide TL96271/TL96371/TL96471 DECT 6.0 cordless telephone/ answering system with BLUETOOTH® wireless technology