Atak A5BS Manuals

CHARGING THE BATTERY Before using the A5BS, fully charge the speaker by plugging the Micro USB end of the supplied USB cable into the MICRO USB PORT on the rear of the speaker. Then plug the Standard USB end into a USB port on a computer or USB wall charger. • The LED INDICATOR on the speaker will turn RED when the speaker is charging • The LED INDICATOR will turn OFF when the speaker is fully charged. PAIRING TO A BLUETOOTH DEVICE 1. Turn your Bluetooth device OFF entirely and then turn it back ON to refresh the device’s Bluetooth memory. 2. Find the Bluetooth menu in your device and make sure the Bluetooth function is turned ON (refer to your device’s user manual for instructions on finding the Bluetooth menu). 3. Turn the A5BS ON using the ON / OFF SWITCH. The LED INDICATOR will blink BLUE about 2 times per second, indicating the speaker is ready to be paired. 4. On your device, perform a Bluetooth “device discovery” to add the A5BS as a new device. 5. When the speaker is discovered your device will display “A5BS” in the Bluetooth menu. 6. If your Bluetooth device asks for a password, enter “0000” and the device will now pair with the speaker and be ready to use. • NOTE: The LED INDICATOR will flash BLUE about once every 3 seconds when the speaker has successfully paired with your device. 7. If supported by your device’s menu, set the A5BS as “set as authorized” or “add to trusted devices”. • NOTE: Keep the Bluetooth function on your device ON, to insure the speaker can automatically pair with your device the next time the speaker is turned ON. PLAYING MUSIC After successfully pairing the speaker with your Bluetooth device, you can begin playing music simply by choosing the song you wish to hear on your device’s menu system (refer to your device’s user manual for instructions on playing music). All Volume & Playback controls (Play, Pause, Skip + / -, etc.) are controlled directly on your Bluetooth device. USING NON-BLUETOOTH DEVICES If you wish to use a device that does not have Bluetooth functionality with the A5BS, simply connect one end of the supplied 3.5mm Audio Cable into the Headphone Jack of your device and the other end into the 3.5mm AUDIO INPUT on the A5BS. NOTE: When using the 3.5mm AUDIO INPUT the Bluetooth functions of the A5BS are not available and the LED INDICATOR will turn OFF. To resume Bluetooth operations simply unplug the cable from the 3.5mm AUDIO INPUT and the A5BS will automatically re-pair with your Bluetooth device. ON / OFF SWITCH LED INDICATOR MICRO USB PORT 3.5mm AUDIO INPUT A5BS BLUETOOTH SPEAKER INSTRUCTION MANUAL