Atom AT4110 Manuals

IMPORTANT INFORMATION • This product must only be installed by a licensed electrician. • Before commencing installation turn off and isolate the electrical supply. • No user serviceable / replaceable parts inside. • Do not attempt to service other parts of the unit as this will void the warranty. PIR sensor 12 m - wall mount - IP44 - black INSTruction MANUAL AT4110/PIR/BLK PIR SENSOR Product Specification Sensors PIR, ambient light Supply voltage 220 V ~ 50 Hz Output load 1200W incandescent 300W inductive 150W LED Operating temperature -20 to 40°C Field of view 180° Detection range Max. 12 m (< 24 °C) Detection motion speed 0.6 - 1.5 m/s Time delay Min. 10 sec ± 3 sec Max. 7 min ± 2 min Ambient light < 3 - 2000 lux (adjustable) Ingress protection IP44 Material PC UV stabilised Mounting Mounting options Wall mount Mounting centres 60 x 48 mm Installation height 1.8 - 2.5 mm Dimensions 100 / 87 / 79 mm 79 87 100 Installation Remove the product from the box and inspect it for any damage. If you believe the product to be damaged or otherwise unsound, do not install the product. Please return it to the place of purchase for replacement. If the product is satisfactory, proceed with the installation: 1. Remove both screws from the front of the product and detach the terminal block cover. 2. Feed the mains cable through the gasket on the terminal block cover. Connect the mains cable into the terminal block, as per the wiring diagram below. 3. Fix the terminal block cover to the wall in the desired position. 4. Reattach the sensor to the terminal block cover and fix screw in position. Wiring diagram Detection pattern Detection Zone Range ø Height Max 12 m 2.5 m 2 2 4 4 6 6 10% 25% 50% 75% 100% 6 2 8 10 12 4 1 2 terminal block cover gasket mounting screws N Blue N L’ Red Load L Brown IN~ L