Audiovox 5BCR07 Manuals

1 pdf manual(s) Audiovox 5BCR07 for free download (Document Types: Programming manual)

Audiovox 5BCR07 Programming manual [PDF] (8 pages)

  • Identifier: id-139565
  • Brand: Audiovox
  • Device: 5BCR07 Car Alarm
  • Type: PDF
  • Key Aspects: Risk Mitigation and Accident Prevention, Routine Functionality Testing, Warranty and Service Information
  • UPD Date: 18.06.2026
  • Source File: 47174.pdf
  • Pages: 8
  • Description: Device technical manual for the Audiovox 5BCR07.
Pages Preview:
  • 128-6799C 2 of 8 2 programming with the default button configurations for the first four chan- nels will be complete. TO ENTER THE PROGRAM MODE: 1. Turn the ignition switch to the “ON” position. 2. Within 10 seconds, Press and release the valet/program switch three times. Note: Some systems may use a combination push-button LED switch. In these systems the push-button and the dash mounted LED are one and the same. (Siren emits 1 short chirp indicating
  • 128-6799C 3 of 8 3 10. Within 10 seconds, press and release the valet program switch one time. (Siren emits 5 short chirps indicating channel 5 has been entered) 11. Within 10 Seconds, Press and hold any unused button(s) of the first transmitter you wish to control Channel 5 output, (Auxiliary Output 2) until a long chirp is heard from the siren. (Repeat this for each transmitter you wish to operate the Channel 5 output) 12. Within 10 seconds, press and re
  • 128-6799C 4 of 8 4 to use, and all others are erased, you will have to fill all four receiver slots. If in step 3 you identified one transmitter, you will have to fill the additional 3 slots. If in step 3 you identified two transmitters, you will have to fill the additional two slots, etc... 4. Press and hold any unused button or combination of buttons until a long chirp is heard from the siren. Release and press the button or button combination again an
  • 128-6799C 5 of 8 5 To replace the transmitter battery: 1. Slide back the lock tab on the back side of the transmitter case in the direction shown. 2. Slide back the battery case cover in the direction shown. 3. Remove the discharged battery, making note of the location of the + and - contacts shown, and replace with a new type alkaline 1.5 volt AAA Battery. 4. Making note of the location of the (+) and (-) contacts, insert a new AAA battery alkaline 1.5
Document Preview & Text Transcription (Main Page)
Click to expand and read text
128-6799C 1 of 8 1 Your Alarm and or Remote Start unit has a configurable receiver that allows the transmitter to be programmed to operate the Lock Unlock functions with one transmitter button or with two transmitter buttons (separate Lock/ Unlock). In addition, the receiver also allows driver priority function. This driver priority function takes place when ever a particular transmitter is used to unlock the vehicle regardless of the selection of one button or two button operation. The following indicates the receiver programmable slots. 1 Lock/Unlock or Lock 2 Unlock if Programmed 3 Trunk Release & or Remote Start (Optional on some models) 4 Auxiliary Output 5 Auxiliary Output 6 Driver 1 Priority or Sperate Output 7 Driver 2 Priority or Separate Output Receiver channels 6 or 7 will accept the programming of transmitter channel 1 if used as the Lock/Unlock button, or Channel 2 when separate Lock Unlock buttons are programmed. In this way, whenever the transmit- ter is used to unlock the vehicle, channel 6 or 7, when programmed, will provide a pulsed ground output. This output can be connecter to the driver priority function of the vehicle to reset preset user features. Please consult with your installation centers technician to see if this feature is available in your vehicle. NOTE: A total of 4 transmitters may be programmed into any receiver channel. Force programming a transmitter, removing a transmitter, or reprioritizing a transmitter is covered later in this manual. Also, if you do not program a transmitter button into channel 2 which is the separate unlock/disarm channel, then whatever button is programmed into channel 1 will serve as both lock/arm & unlock/disarm. Note: The RED Button serves as a function button in combination with other buttons explained in your owners manual. This button may not be used to operate a receiver channel. NOTE: The Option Button is predetermined and programmed for access to Time Start, and Temperature Start & Check so it cannot be used for multiple button operation of any other feature. It will however operate for any single button programming. This transmitter is also capable of one button programming for certain model Audiovox Alarms. If your alarm is one of these models, then when step 3 is completed on the following page, you can turn the ignition switch off and Rev B to show use of PBLED 6/06 Rev C to add 5BCR07, 5/07 Model 5BCR/5BCR03/ 5BCR05/5BCR07 Programming Guide

Audiovox 5BCR07: Car Alarm Category Related Instructions

M-374
Molpir M-374
07.06.2026 40 pages

M-374 Dvojcestný auto alarm 12V Dvoucestný auto alarm 12V 2-way car alarm 12V Montážny návod Instalační příručka Installations manual Objednávacie číslo Objednací číslo Ordering code M-374 Česky Slovensky English Device instruction manual for the Molpir M-374 Car Alarm. This manual details installation, component overview, installation procedures, testing procedures.

DXL_5000L
Pandora DXL_5000L
05.09.2026 64 pages

1 USER MANUAL Pandora would like to thank you for choosing our service-security system Pandora Professional is a premium car service-security system, built for cars with on-board voltage of 12V. It is a complex engineering solution which includes car security Product usage guide for the Pandora DXL_5000L Car Alarm. This documentation covers device features, installation support, usage recommendations.

30SL
Silencer 30SL
30.08.2026 12 pages

INSTALLATION MANUAL This unit is designed for professional installation only and must be installed by an authorized Silencer dealer. For Warranty information: Please visit our website at www.magnadyne.com Complete instruction guide for the Silencer 30SL Security System. This documentation details system checks, error codes, user instructions, installation support.

Marksman Extreme Series X9
Marksman Marksman Extreme Series X9
12.04.2026 28 pages

Installation Manual Model: X9 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including int Product operation guide for the Marksman Marksman Extreme Series X9 TV Antenna. The document provides guidance on safety and functional overview, configuration options, diagnostic information.