Aurora AU-CH102 Manuals

Aurora Lighting Inc., 12035 34th St N, Suite 2, St Petersburg, FL 33716 USA Document Version - IS_AU-CH102-103 V2 Website: www.auroralighting.com Email: [email protected] LED STRIP PROFILE PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION LEAVE A COPY FOR THE USER / MAINTENANCE ENGINEER FOR FUTURE REFERENCE IMPORTANT INSTALLATION INFORMATION WARNING RISK OF ELECTRIC SHOCK • Disconnect power before performing installation or maintenance • Verify that supply voltage is correct by comparing it with LED strip label information. • Make all electrical grounded connections in accordance with the latest edition of the National Electric Code (NEC) and applicable local code requirements. • If the supply wire is damaged. It must be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. • All wiring connections should be capped with UL approved wire connections. WARNING CAUTION • If electrical appliances are disposed of in landfill or dumps, hazardous substances can be damaging to health and well-being. • The LED strip used with this profile is not intended for use with emergency exit fixtures or emergency exit lights. • Improper Installation will VOID warranty WARNING RISK OF BURNS • Do not exceed maximum wattage on LED strip label used with this profile. • Follow all manufacturer’s warnings and recommendations for the driver type, mounting position, methods, replacements and recycling. WARNING RISK OF FIRE • Operating Temperature is -4°F to 122°F / -20°C to 50°C “Keep LED Strip out of direct sunlight” • Incorrect installation may result in electrical shock or a risk of a fire FOR MODEL: AU-CH102&AU-CH103 For indoor applications: grooves (profile can fit slim design and thin furniture pieces, wall surfaces and drywall). Installation Guide: 1. Make sure that groove is deep enough to take the entire depth of the profile (Figure 1). Figure 1