Austrian Audio OC707 Manuals

OC707 True Condenser Vocal Microphone Owner’s Manual Introduction and Safety Instructions Please read, understand, and follow all instructions in this manual before using this product. This product was made for professional users and we ask you to follow a few restrictions to guarantee a hassle-free workflow for you, and to keep the product in perfect working condition: • Please do not operate this product in other than the intended use cases. • Do not use if the product is defective • Always keep and operate the product in a dry and safe place • Do not expose it to excessive heat (for example, do not leave it in your car parked in the sun) • If you need to bring the product inside from the cold, please give it time to reach adequate temperature before use (allowed storage temperature range: -25 °C to 60 °C). • It’s not recommended to operate the microphone outside the specified working temperature range: 0 °C to 55 °C. • Do not use this product in a wet or in humid environment. • Do not drop. • When used upside down (for example in the OCH1) make sure that a tight fit is achieved and do not operate it upside down right above personnel. • This product requires a phantom power source of 48 V (+/-4 V), max draw is 2,4 mA. • Please keep this product away from small children and persons who are not able to operate professional audio equipment (like light technicians and drunken roadies). • If you need to clean the product, do this only with a soft dry cloth • Please do not use any third-party accessories unless otherwise stated • Do not disassemble the product, as there are no user-serviceable parts inside (but plenty of components to mess up). • The length of the XLR cable must not exceed 30 m. • Do not remove the stickers (if applicable). Thank you for reading the instructions so far and thank you for putting your trust in Austrian Audio.