Auto Meter POSI-160 Manuals

12
POSI-160 Operator Manual The POSI-160 is the ultimate black box. It is the store’s answer for gathering and printing battery and electrical system testing and charging data from the store’s XTC-160 and BVA-230/BVA-260. 2650-1546-00 Rev. A 1/16/13 Auto Meter Products Inc. 413 West Elm Street Sycamore, IL 60178 Service (815) 899-0801 Toll Free (866) 833-TEST (8378) www.autometer.com/test Test Equipment 2 11 NOTES NOTES 10 3 LIMITED WARRANTY CONGRATULATIONS! You have purchased the Auto Meter Battery Testing & Charging Interface Hub that gathers, stores, and allows printing of test results to the printer from the XTC-160 (XTC) and BVA-230/BVA-260 (BVA). If you should have any questions about your POSI-160, see the last page of this booklet for contact information. POSI-160 Max. No. of XTC Connected................................................................ 4 Max. No. of BVA Connected................................................................. 2 Input Power .....................................................................100-240 VAC, 50-60 Hz (Power Supply Input), 12 VDC 5A(Power Supply Output) Cooling........................................................................................ Vented Size (Battery Testing & Charging Interface)..............7-1/2” x 8-1/2” x 3” Weight (Battery Testing & Charging Interface) �������������������������������4 lbs Size (IR Interface).....................................................2-3/4” x 4” x 1-1/2” Weight (IR Interface).....................................................................3.2 oz IR Interface Connection.................................................................. DB-9 Max. Recommend IR Print Distance.............................................. 15 ft. 12 MONTHS FROM DATE OF PURCHASE The manufacturer warrants to the consumer that this product will be free from defects in material or workmanship for a period of twelve (12) months from the date of original purchase. Products that fail within this 12 month warranty period will be repaired or replaced at the manufacturer's option to the consumer, when determined by the manufacturer that the product failed due to defects in material or workmanship. This warranty is limited to the repair or replacement of parts and the necessary labor by the manufacturer to effect the repair or replacement of the product. In no event shall the manufacturer be responsible for special, incidental or consequential damages or costs incurred due to the failure of this product. Improper use, accident, water damage, abuse, unauthorized repairs or alterations voids this warranty. The manufacturer disclaims any liability or consequential damages due to breach of any written or implied warranty on its test equipment. WARRANTY AND SERVICE INFORMATION Warranty claims to the manufacturer's service department must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser and is non-transferable. Shipper damage incurred during return shipments is not covered under this warranty. It is the responsibility of the shipper (the customer returning the Test Equipment) to package the tester properly to prevent any damage during return shipment. Repair costs for such damages will be charged back to shipper (customer returning the Test Equipment). Protect the product By shipping in original carton or add plenty of over-pack cushioning such as crumpled up newspaper.