Automationdirect.com Productivity 2000 P2-04DA Manuals

1 Sales 800-633-0405 www.productivity2000.com Terminal Block sold separately, (see wiring options on page 5). Warranty: Thirty-day money-back guarantee. Two-year limited replacement. (See www.productivity2000.com for details). 1+0.100V 2 4.00 3 13.78 4-4.741V 2000 WARNING: To minimize the risk of potential safety problems, you should follow all applicable local and national codes that regulate the installation and operation of your equipment. These codes vary from area to area and it is your responsibility to determine which codes should be followed, and to verify that the equipment, installation, and operation are in compliance with the latest revision of these codes. Equipment damage or serious injury to personnel can result from the failure to follow all applicable codes and standards. We do not guar- antee the products described in this publication are suitable for your particular application, nor do we assume any responsibility for your product design, installation, or operation. If you have any questions concerning the installation or operation of this equipment, or if you need additional information, please call Technical Support at 770-844-4200. This publication is based on information that was available at the time it was printed. At AutomationDirect.com® we constantly strive to improve our products and services, so we reserve the right to make changes to the products and/or publications at any time without notice and without any obligation. This publication may also discuss features that may not be available in certain revisions of the product. Removable Terminal Block Specifications Part Number P2-RTB P2-RTB-1 Number of positions 18 Screw Terminals 18 Spring Clamp Terminals Wire Range 30 - 16 AWG (0.051 - 1.31 mm²) Solid / Stranded Conductor 3/64 in. (1.2 mm) Insulation Maximum 1/4 in (6 - 7 mm) Strip Length 28-16 AWG (0.081 - 1.31 mm²) Solid / Stranded Conductor 3/64 in (1.2 mm) Insulation Maximum 19/64 in (7 - 8 mm) Strip Length Conductors “USE COPPER CONDUCTORS, 75ºC” or equivalent. Screw Driver Width 1/8 in (3.8 mm) Maximum Screw Size M2 N/A Screw Torque 2.5 lb·in (0.28 N·m) N/A P2-04DA Analog Output The P2-04DA Voltage/Current Analog Output Module provides four channels of ±10VDC or 4-20 mA sink/source selectable outputs for use with the Productivity2000 System Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Removable Terminal Block Specifications. . . . . . . . 1 General Specifications . . . . . . . . . . . . . . . . . . . . . . 2 Output Specifications . . . . . . . . . . . . . . . . . . . . . . . 2 Wiring Diagram and Schematic . . . . . . . . . . . . . . . . 3 Module Installation Procedure . . . . . . . . . . . . . . . . . 4 QR Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hot Swap Information . . . . . . . . . . . . . . . . . . . . . . . 4 Wiring Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Module Configuration . . . . . . . . . . . . . . . . . . . . . . . 5 Linear Scaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Non-Linear Scaling . . . . . . . . . . . . . . . . . . . . . . . . . 6 OLED Panel Display Menus . . . . . . . . . . . . . . . . . . 7