Avid Technology VENUE Manuals

VENUE | Stage 64 Rack Ears 1 VENUE | Stage 64 Rack Ears This guide shows you how to attach the included rack ears to the VENUE | Stage 64 I/O rack and mount the rack into a flight case, furniture or other rack housing. The ears can be installed on the front or the back of the rack depending on the desired orientation. Components Mounting the Stage 64 utilizes the following components: • (2) Stage 64 rack ears • (18) Rack ear mounting screws (nine per rack ear) and washers • (8) Rack screws and washers (four per side) • Flight case, furniture or other enclosure (not included) Attaching the Rack Ears The included rack ears can be installed on the front or the back of the Stage 64. The front of the rack is where all the I/O connectors are located, and the back of the rack is where the power switches and associated AC connectors are located. To attach the rack ears to Stage 64: 1 Locate the rack ears and the rack ear mounting screws, in- cluded in the Stage 64 box. 2 For forward mounting, do the following: • Position one of the rack ears at the front of the rack, making sure it is oriented correctly for right-front or left-front loca- tion, as appropriate. • Insert nine rack ear screws with washers in the positions in- dicated in the figure below, and tighten to secure the rack ear to the rack. • Repeat the same procedure to attach the other rack ear to the other side of the rack using the other nine screws. Avoid overheating. Be sure to maintain proper air ventila- tion when installing the device in a rack, and do not block the Stage 64 fans while operating the device. Stage 64 rack ear Rack ears attached to the front of Stage 64 (right side shown) © 2015 Avid Technology, Inc 9320-65322-00 REV A

9322-62809-00 REV A 08/10 VENUE Profile Guide and VENUE Software 2.9