-
Sheet-fed Duplex Scanner
1
-
Federal Communications Commission (FCC) compliance
3
-
IBM compatible PC 586, Pentium or higher
5
-
Table of Contents
6
-
Scanner Main Unit
9
-
2. Scanner Installation
10
-
2.1 Installing the ADF Paper Tray
11
-
2.2 Installing the ADF Output Paper Tray
12
-
2.3 Installing Front Paper Tray
13
-
Turning on the Power
15
-
Place the supplied CD-ROM onto your CD-ROM drive.
16
-
View Manual: Click “View Manual” to view or
17
-
3. Completing Your First
19
-
3.1.2 Placing Your Document in the ADF Paper Tray
20
-
3.1.3 Placing Your Document On the Front Tray
21
-
Verifying Your Scanner Installation
22
-
Save File Path
23
-
Fit Page View
25
-
Using the Scanner
27
-
4.1 Buttons on the Scanner Properties Dialog Box
28
-
The following table shows the default settings：
29
-
4.2 The Image Tab
30
-
4.2.1 The Image Selection Box
31
-
Example 2：Scanning a two-sided color document, one
32
-
Front/Rear Auto Color Detection:
33
-
4.2.2 Other Image Options
34
-
Fixed Processing: Used for black-and-
35
-
Error Diffusion Image
36
-
Used to convert a grayscale image to a
37
-
Document Type: Choice: Normal, Photo, Document
38
-
Adjusts the lightness or darkness of an
40
-
A good control of the resolution results a
41
-
Reverses the brightness and the colors in the
42
-
Auto Document Feeder: Used to scan
43
-
The purpose of Color Matching is getting the
44
-
4.2.4 Scanning grayscale images
45
-
4.2.6 Editing Profiles
46
-
To load a profile,
47
-
To rename a profile,
48
-
4.3 The Compression Tab
49
-
The Compression tab dialog box
50
-
The Color Dropout Tab
51
-
The Color Dropout dialog box
52
-
4.4.2 Other Color Dropout Options
53
-
Remove Blue, Threshold: 20, Background:
54
-
4.5 The Paper Tab
55
-
4.5.2 Other Paper Selection
58
-
The Multi-Feed Detection Tab
61
-
Additional Length Detection
62
-
Clear the Multi-Fed Paper:
67
-
How to add the sound alarm：
68
-
4.6.1 Relative to Document
69
-
4.7 The Preview Tab
72
-
4.8 The Options Tab
73
-
Select “fanfold” to rotate the image
74
-
Choose the rotation angle from the drop
75
-
Check if you wish to remove the blank page
76
-
This option allows you to set your scan
80
-
4.9 The Setting Tab
81
-
Mode: None, Page Number, Memory
82
-
Check and the scanning progress bar
83
-
4.10 The Imprinter Tab
84
-
Check Print All to automatically print the
85
-
Choice: Normal, Rotated (180 degrees)
86
-
4.11 The Information Tab
87
-
The “Reset Pad Count” button」：
88
-
5. ISIS Interface Operation
89
-
Using the Buttons
90
-
6.3 Scanning From One Touch of the Buttons
93
-
7.1 Cleaning the ADF
94
-
7.2 Cleaning the Calibration Area
95
-
7.3 Replacing the Snap-in Pad Module
96
-
7.4 Replacing the ADF Roller
97
-
4. Remove the ADF roller from the shaft.
98
-
8.1 Clearing a Paper Jam
99
-
8.2 Questions and Answers
101
-
8.3 Technical Service
103
-
Additional Length Detection, 4-
105
-
Multi-Feed Detection, 4-31
106
