AWS TL-330 (330lb x 0.2lb) Manuals

American Weigh Scales TL-330 (330lb x 0.2lb) TL-440 (440lb x 0.5lb) User Manual TL-Series Copyright © 2012 American Weigh Scales, Inc. All rights reserved. Rev. 2.0 TL-Series Manual Thank you for purchasing the American Weigh TL-Series hanging scale. Please read all operating instructions carefully before use. Scales are precision measuring devices and should always be handled with proper care. To ensure years of reliable service, keep these simple tips in mind: • Do not exceed the scale’s maximum capacity. • Store your scale in a clean, dry location. Dust, dirt, and moisture can accumulate on the weighing sensors and electronics causing inaccuracy or malfunction. • Avoid using your scale in close proximity to strong radio wave emitting devices such as cordless phones. • Suspend the scale from a stable point free from vibration. • Do not drop items onto the weighing hook. This may cause damage to the load sensor. • Avoid dropping your scale. The warranty does not cover damage due to rough treatment or overload. • Check the batteries first if you are having any trouble with your scale. This simple step can remedy most scale issues. • Calibration is performed at the factory. Only experienced users should perform calibration when the scale requires it. I. Part List 1. Scale 2. S-Hook and Shackle 3. AAA Batteries (x2) II. Key Description 1. ON/OFF/TARE - Tap to turn the scale on or re-zero the scale. Hold to turn the scale off. 2. UNIT Key - Tap to change the unit between LB, OZ, or KG. Hold to change auto-off setting (see V). 3. HOLD Key - Tap to change the scale’s display hold mode between Auto Hold, Peak Hold, and No Hold (see VII). III. Battery Installation lb oz kg AAA AAA ON/OFF TARE UNIT HOLD N lb oz kg AAA AAA ON/OFF TARE UNIT HOLD N 2. 1. 3. TL-Series Manual 1. Before using the scale for the first time, check the battery compartment and remove any plastic insulation strips or packaging that may be in place to prevent battery drainage during shipping/storage. 2. If you are replacing the batteries, make sure the positive and negative contacts are properly aligned. IV. Operation 1. Press the ON/OFF/TARE key to turn the scale on. 2. Wait for the display to display zero. 3. Hang the item to be weighed from the weighing hook. 4. Observe the weight on the display. 5. To re-zero the scale, tap the ON/OFF/TARE key. 6. To turn the scale off, hold the ON/OFF/TARE key. V. Auto-Off Setting This scale has a selectable auto-off feature. 1. Press and hold the UNIT key to toggle the auto-off setting on or off. A message will display on the screen to indicate your selection: AUTO: Auto-Off is Enabled. Scale will turn off after 2 minutes of non-use. OFF: Auto-Off is Disabled. Scale will remain on until turned off manually. VI. Changing the Unit of Measure This scale can read in LB, OZ, or KG. To change the weighing unit, follow these instructions: 1. Tap the UNIT key until the desired weighing unit is indicated on the right side of the display.