Azden 1200BT Manuals

User’s Guide 1200URX/AB • 1200URX/VM • 1200URX/Si 1200BT • 1200XT ENHANCED BROADCAST PERFORMANCE UHF WIRELESS SYSTEM Azden Corporation, 147 New Hyde Park Road, P.O. Box 10, Franklin Square, NY 11010 tel - 516.328.7500 • fax - 516.328.7506 • email - [email protected] © 2008 Azden Corporation P1030-01 Printed in USA SPECIFICATIONS 1200URX/AB - 1200URX/Si - 1200URX/VM RF Carrier Frequency Range 188 steps ~ 638.125 - 661.875 MHz MicroComputer Controlled PLL Synth. Noise Reduction Expander (THAT) Effective Operating Range 200 - 300 ft ~ 60 - 100m Frequency Response 50 - 15kHz (± 1.5dB) RF Sensitivity (12dB SINAD) 1.2μμμμμV Adjacent Channel Selectivity > 70dB (± 250kHz) Image Rejection > 93dB IF Rejection > 93dB Audio THD < 0.8% Audio Output 40dBm ± 40kHz Deviation (-20dBm ± 40kHz Deviation for 1200URX\Si) Output Impedance 600Ω ( Ω ( Ω ( Ω ( Ω (300ΩΩΩΩΩ for 1200URX\Si) Signal/Noise Ratio > 62dB (± 5kHz Deviation) “A” Weighted Power Requirements 11 - 15V DC @ 220mA (10 - 17V DC @ 200mA for 1200URX\Si) Dimensions 68W x 84H x 18D mm- 1200URX/Si insertion 93W x 119H x 49D mm - 1200URX/AB 82W x 150H x 60D mm - 1200URX/VM Operating Temperature Range -500 - +1220 F ~ -100 - +500 C Weight 8.8 ounces ~ 250g for 1200URX/Si 15.87ounces ~ 450g for 1200URX/AB 26.45ounces ~ 750g for 1200URX/VM 1200BT Output Power 25mW Max Modulation Sensitivity -4dBm MIC Level / Imped. -60dBm / 2.2kΩ Ω Ω Ω Ω (± 5kHz Deviation) Power Requirements 3V DC (2 “AA” Alkaline) @ < 150mA Dimensions 2.48 (W) x 3.86 (H) x 1.12 (D) inches 63 (W) x 98 (H) x 28.5 (D) mm Weight w/Battery 6.35 ounces ~ 180g 1200XT Output Power 25mW Max Modulation Sensitivity +20dBM ~ 0dBm MIC Level / Imped. (Dynamic) -60dBm / 2.2kΩ Ω Ω Ω Ω (± 5kHz Dev.) Phantom Power 48V ±2V @ 2mA Power Requirements 3V DC (2 “AA” Alkaline) @ < 180mA - 290 mA w/Phantom Power ON Dimensions 1.57 (W) x 4.49 (H) x 1.57 (D) inches 40 (W) x 114 (H) x 40 (D) mm Weight w/Battery 6.35 ounces ~ 180g Due to constant improvements, specifications are subject to change without notice. Licensing Licensing of this, or any Azden wireless equipment is the user’s responsibility. The ability to receive a license depends largely on the user’s classification, application and frequency. Contact the appropriate agency (FCC in the USA) for further information.

User’s Guide 1200URX/AB • 1200URX/VM • 1200URX/Si 1200BT • 1200XT ENHANCED BROADCAST PERFORMANCE UHF WIRELESS SYSTEM Azden Corporation, 147 New Hyde Park Road, P.O. Box 10, Franklin Square, NY 11010 tel - 516.328.7500 • fax - 516.328.7506 • email - [email protected] © 2008 Azden Corporation P1030-01 Printed in USA SPECIFICATIONS 1200URX/AB - 1200URX/Si - 1200URX/VM RF Carrier Frequency Range 188 steps ~ 638.125 - 661.875 MHz MicroComputer Controlled PLL Synth. Noise Reduction Expander (THAT) Effective Operating Range 200 - 300 ft ~ 60 - 100m Frequency Response 50 - 15kHz (± 1.5dB) RF Sensitivity (12dB SINAD) 1.2μμμμμV Adjacent Channel Selectivity > 70dB (± 250kHz) Image Rejection > 93dB IF Rejection > 93dB Audio THD < 0.8% Audio Output 40dBm ± 40kHz Deviation (-20dBm ± 40kHz Deviation for 1200URX\Si) Output Impedance 600Ω ( Ω ( Ω ( Ω ( Ω (300ΩΩΩΩΩ for 1200URX\Si) Signal/Noise Ratio > 62dB (± 5kHz Deviation) “A” Weighted Power Requirements 11 - 15V DC @ 220mA (10 - 17V DC @ 200mA for 1200URX\Si) Dimensions 68W x 84H x 18D mm- 1200URX/Si insertion 93W x 119H x 49D mm - 1200URX/AB 82W x 150H x 60D mm - 1200URX/VM Operating Temperature Range -500 - +1220 F ~ -100 - +500 C Weight 8.8 ounces ~ 250g for 1200URX/Si 15.87ounces ~ 450g for 1200URX/AB 26.45ounces ~ 750g for 1200URX/VM 1200BT Output Power 25mW Max Modulation Sensitivity -4dBm MIC Level / Imped. -60dBm / 2.2kΩ Ω Ω Ω Ω (± 5kHz Deviation) Power Requirements 3V DC (2 “AA” Alkaline) @ < 150mA Dimensions 2.48 (W) x 3.86 (H) x 1.12 (D) inches 63 (W) x 98 (H) x 28.5 (D) mm Weight w/Battery 6.35 ounces ~ 180g 1200XT Output Power 25mW Max Modulation Sensitivity +20dBM ~ 0dBm MIC Level / Imped. (Dynamic) -60dBm / 2.2kΩ Ω Ω Ω Ω (± 5kHz Dev.) Phantom Power 48V ±2V @ 2mA Power Requirements 3V DC (2 “AA” Alkaline) @ < 180mA - 290 mA w/Phantom Power ON Dimensions 1.57 (W) x 4.49 (H) x 1.57 (D) inches 40 (W) x 114 (H) x 40 (D) mm Weight w/Battery 6.35 ounces ~ 180g Due to constant improvements, specifications are subject to change without notice. Licensing Licensing of this, or any Azden wireless equipment is the user ’s responsibility. The ability to receive a license depends largely on the user’s classification, application and frequency. Contact the appropriate agency (FCC in the USA) for further information.