Bachmann E-Z Command Dynamis Manuals

Dynamis Digital trainset set up - please read before using your trainset Step 1: Getting Started Connect the Basestation to power supply. Insert batteries into handset and turn on. Press the Stop Key if the indicator is ‘ON’. The IR Receiver LEDs will flash for a few seconds as connection is made. From new, your train has a default address of 3, Dynamis powers on ready to operate a train with an address of 3. Dynamis has a context menu. A list of the meanings of each item is shown overleaf. Step 2: Turning the headlights on Press headlight key to turn headlights ON/OFF Step 5. Running another train Press [LOCO] and enter the address of the loco / train to be run. If there is already a roster entry this will be shown, otherwise a new roster record is created with the default name of ‘Locomotive X’ where X was the address entered. This can be changed to be a more representative name (step 3 on left). Keypad for direct control of up to 21 functions, accessory hotkeys and alpha numerical keypad for loco and accessory address entry Handset features Action keys Left hand is MODE key to switch between locomotive and accessory control Emergency stop Infrared receiver / transmitter Screen Direction Battery compartment ON/OFF switch Lanyard fixing Joystick Battery compartment Headlights Step 4. Changing the handset roster information To change the name press - MENU EDIT NAME Use to delete default name Enter a new name eg CLASS 150 DMU using the keypad To change the Icon press - MENU [SCROLL] EDIT SYMBOL choose one of the icons, or none. Thank you for your choice of the Bachmann Branchline Dynamis Digital Trainset. Please take a few moments to familiarise yourself with the system. Please also refer to the enclosed general train set User Guide, although some set contents may differ. The tape under the Basestation should only be removed to expand the system with the separately available ProBox. Step 3: Changing the address of your train Each digital train has an address - a number between 1 and 9999 - that it will respond to The address can be changed as often as desired, but when carrying out this procedure the train being addressed must be the only train on the track connected to the Dynamis Use WRITE ADDRESS ON SERVICE TRACK option in the Program menu press MENU [SCROLL] PROGRAM [SCROLL] WRITE ADDR ON SERVICE TRACK Use to delete existing address then, enter the new address and press [PROG] The train will move momentarily during programming. Shift key to access F11 to F20