Bauhn APVK-1221 Manuals

Control and Buttons Have you got everything? A. Switch between phone/camera mode B. USB-C charging port C. Button: increase brightness D. Charging LED Indicator E. Button: decrease brightness F. On/Off Switch: slide to switch the LED video light unit on/off Condenser Microphone LED Video Light Bluetooth® Remote A. Foldable Tripod B. Condenser Microphone C. LED Video Light D. Bluetooth® Remote E. Phone Holder F. USB-C Charging Cable G. User Guide H. Warranty Certificate User Guide Model: APVK-1221 Portable Phone Vlogging Kit A B C D E F G H I J K L G. Mode Button: change brightness setting H. Power LED Indicator I. Power Button: press to turn the light on/off J. LED Light Indicator K. Capture Button L. On/Off Switch: slide to turn the remote on/off Operation Setting Up • Set up the tripod to the desired height using the adjustment locks. • Screw the phone holder onto the tripod as illustrated, ensuring it is securely screwed in. • Extend the phone holder and slide your phone in. The phone holder will automatically lock and hold you phone in place. • Slide the condenser microphone into the LED video light to securely lock it in place. • Once the condenser microphone and LED video light are connected, slide it onto the phone holder as illustrated, ensuring it is securely locked in. • Use the handle on the tripod to adjust the angle of your photo/video. Using The Condenser Microphone • Connect the condenser microphones 3.5mm audio cable to your phones earphone port. • Slide to switch up for phone mode. Slide the switch down for camera mode (you camera must support the 3.5mm MIC input. • Note: you will need to buy a lighting to 3.5mm adaptor for iOS smart phones that do not have an earphone port. Using The LED Video Light • Slide the On/Off switch to On to turn the LED video light unit on. The power LED indicator will light up blue. • Press the Power button to turn the light on/off. The power LED indicator will turn off once the video light is on. Press again to turn off the light and the power LED indicator will light up blue again. • Use the / buttons to adjust the brightness level. • Press the Mode button to change brightness settings. • Slide the On/Off switch to Off to turn the LED video light unit off. The power LED indicator will also turn off. Using The Remote • Slide the On/Off switch to turn the remote on until the LED indicator starts flashing. • Turn on your phones Bluetooth® and select “SelfieCom” from the list of found devices. Once connected, the LED indicator will stop flashing. (The remote will automatically turn off after 5 minutes if not paired). • Press the capture button to remotely take a picture. • Slide the On/Off switch again to turn the remote off. Charging • LED Video Light: Connect the supplied USB-C charging cable to the USB-C port on the LED video light. The charging LED indicator will light up red. Once fully charged, the charging LED indicator will light up green. • Remote: Connect the supplied USB-C charging cable to the USB-C port on the remote. The charging LED indicator will light up red. Once fully charged, the charging LED indicator will turn off.