Baxton Studio 339C Manuals

ASSEMBLY INSTRUCTION MODEL : 339C Read this instruction carefully. Remove all wrapping material, staples and straps from the carton. See hardware and furniture part list For guidance. Be sure you have all wooden furniture parts on a clean and flat soft surface, such as a carpet or rug, to prevent from being scratched.Follow the figure to start assembling. CAUTION : 1. Do not FULLY - TIGHTEN the nut or screw untill all is ready to assemble. 2. Do not OVER - TIGHTEN the nut or screw to avoid causing damages to the thread. 3. Keep all hardware part out reach of children. PART LIST NO QTY A BACK REST B FRONT LEG C SIDE RAIL 2 PCS D CUSHION SEAT 1 PC 1 PC 1 PC 5 1 4 DESRIPTION NO QTY 1 2 3 4 5 JCBC SCREW M6 X 50MM WOOD DOWEL Ø8 x 30MM CSK SCREW M4 x 30MM SPRNG WASHER M6 M4 ALLEN KEY 6 PCS 4 PCS 3 PCS 6 PCS 1 PC COMPELETE ASSEMBLE STEP 1 Attached C to B according to the hole and tighten it using hardware number 1,2,4, and 5 . C C B 2 4 1 5 STEP 2 Align the whole part from STEP1 to A . Tighten the part of C and A using hardware number 1,4 and 5 . C A STEP 3 Stick D to the whole assemble part and fully-tighten it with hardware number 3 . STEP 4 C A D 3 X 3PCS

ASSEMBLY INSTRUCTION MODEL : 339C Read this instruction carefully. Remove all wrapping material, staples and straps from the carton. See hardware and furniture part list For guidance. Be sure you have all wooden furniture parts on a clean and flat soft surface, such as a carpet or rug, to prevent from being scratched.Follow the figure to start assembling. CAUTION : 1. Do not FULLY - TIGHTEN the nut or screw untill all is ready to assemble. 2. Do not OVER - TIGHTEN the nut or screw to avoid causing damages to the thread. 3. Keep all hardware part out reach of children. PART LIST NO QTY A BACK REST B FRONT LEG C SIDE RAIL 2 PCS D WOODEN SEAT WITH SCOOP 1 PC 1 PC 1 PC 5 1 4 DESRIPTION NO QTY 1 2 3 4 5 JCBC SCREW M6 X 50MM WOOD DOWEL Ø8 x 30MM CSK SCREW M4 x 30MM SPRNG WASHER M6 M4 ALLEN KEY 6 PCS 4 PCS 3 PCS 6 PCS 1 PC COMPELETE ASSEMBLE STEP 1 Attached C to B according to the hole and tighten it using hardware number 1,2,4, and 5 . C C B 2 4 1 5 STEP 2 Align the whole part from STEP1 to A . Tighten the part of C and A using hardware number 1,4 and 5 . C A STEP 3 Stick D to the whole assemble part and fully-tighten it with hardware number 3 . STEP 4 C A D 3 X 3PCS