BDI vertica Manuals

3 pdf manual(s) BDI vertica for free download (Document Types: Assembly instructions, Assembly instructions manual)

BDI vertica Assembly instructions [PDF] (4 pages)

  • Identifier: id-2007021
  • Brand: BDI
  • Device: vertica Furniture
  • Type: PDF
  • Key Aspects: Environmental Factors and Restrictions, Performance Optimization Tips, Efficiency and Calibration Tips
  • UPD Date: 06.06.2026
  • Source File: 2280837.pdf
  • Pages: 4
  • Description: Operation guide for the BDI vertica.
Pages Preview:
  • 2 a s s e m b l y i n s t r u c t i o n s bdiusa.com customerservice@bdiusa.com vertica 8559 home theater Step 4 Align Cam Bolt (D) and Wood Dowel (F) of Side Legs (G) into their respective holes in Base Stretcher (H). Step 3 Carefully lay Cabinet (C) on its back. Attach Base Stretcher (H) to bottom of Cabinet (C) using Screw (J). Only hand tighten screws at this point. TWO PERSON ASSEMBLY J x 3 J J J H C G G H H D F G
  • 3 a s s e m b l y i n s t r u c t i o n s bdiusa.com customerservice@bdiusa.com vertica 8559 home theater Step 6 Using Hex Wrench (B1) attach Side Legs (G) and Center Leg (I) with Screws (K). Fully tighten Base Stretcher (H) screws that were left loose in Step 3 using Hex Wrench (B1). Step 5 Insert Cam Fittings (E) into holes of Base Stretcher (H) with the arrow of the Cam Fitting (E) pointing outward on each end of the Stretcher. Tighten each Cam Fit
  • 4 a s s e m b l y i n s t r u c t i o n s bdiusa.com customerservice@bdiusa.com vertica 8559 home theater Adjustable Shelves The shelf pins located inside all three cabinet spaces may be repositioned using Phillips Screwdriver (A), allowing you to raise or lower both Adjustable Shelf (L) and Large Adjustable Shelf (M) to the desired level. Step 7 Position Cabinet right side up and install Back Panel (N) to the backside of the Cabinet (C) by inserting
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 Vertica is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Placement and Maintenance Vertica is designed for indoor use on level floors. Clean wood veneer with a moist cloth. Step 1 Unpack and Identify Unpack and identify the components at left. Note that some components are shipped inside the cabinet. The assembly workspace should be a non- marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at [email protected]. For all other concerns, please contact your BDI Retailer. Component List Designed by Matthew Weatherly. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. BDI are trademarks of Becker Designed, Inc. All Rights reserved. ©2014, BDI Made in China. 8559REV012315v2 Step 2 Install and tighten Cam Bolts (D) into Side Legs (G) using Phillips Screwdriver (A). Insert Wood Dowels (F) into corresponding holes of Side Legs (G). B2 - Leveler Wrench x 1 A - Phillips Screwdriver x 1 B1 - Hex Wrench x 1 C - Cabinet x 1 F - Wood Dowel x 2 E - Cam Fitting x 2 D - Cam Bolt x 2 H - Base Stretcher x 1 I - Center Leg x 1 G - Side Legs x 2 L - Adjustable Shelf x 2 N - Back Panel x 2 M - Large Adjustable Shelf x 1 K - 1/4-20 x 100 mm Machine Screw x 6 J - 1/4-20 x 60 mm Machine Screw x 3 F D G F F D D G G vertica 8559 home theater a s s e m b l y i n s t r u c t i o n s bdiusa.com [email protected] TWO PERSON ASSEMBLY J

BDI vertica Assembly instructions manual [PDF] (7 pages)

  • Identifier: id-1200993
  • Brand: BDI
  • Device: vertica Indoor Furnishing
  • Type: PDF
  • Key Aspects: Package Contents and Accessories List, Hardware Setup Instructions, Emergency Shutdown Procedures
  • UPD Date: 16.08.2026
  • Source File: 957286.pdf
  • Pages: 7
  • Description: Stepwise user guide for the BDI vertica.
Pages Preview:
  • 2 a s s e m b l y i n s t r u c t i o n s bdiusa.com customerservice@bdiusa.com vertica 8556 home theater Step 4 Align Cam Bolt (D) and Wood Dowel (F) of Side Legs (G) into their respective holes in Base Stretcher (H). Step 3 Carefully lay Cabinet (C) on its back. Attach Base Stretcher (H) to bottom of Cabinet (C) using Screw (J). Only hand tighten screws at this point. J J J H C J x 3 G G H TWO PERSON ASSEMBLY H D F G
  • 3 a s s e m b l y i n s t r u c t i o n s bdiusa.com customerservice@bdiusa.com vertica 8556 home theater Step 6 Using Hex Wrench (B1) attach Side Legs (G) and Center Leg (I) to bottom of Cabinet (C) with Screws (K). Fully tighten Base Stretcher (H) screws that were left loose in Step 3 using Hex Wrench (B1). Step 5 Insert Cam Fittings (E) into holes of Base Stretcher (H) with the arrow of the Cam Fitting (E) pointing outward on each end of the Stretc
  • 4 a s s e m b l y i n s t r u c t i o n s bdiusa.com customerservice@bdiusa.com vertica 8556 home theater Step 7 Position Cabinet right side up while carefully supporting drawer fronts to prevent drawers from sliding open. Install Back Panel (M) to the backside of the Cabinet (C) by inserting top edge in upper channel then tipping bottom edge forward and into lower channel. 2 C M 1 The shelf pins located inside the outer cabinet spaces may be repositi
  • 5 a s s e m b l y i n s t r u c t i o n s bdiusa.com customerservice@bdiusa.com vertica 8556 home theater Step 8 Drawer Position Options Two (2) adjustment mechanisms are found on underside of each Vertica drawer, at left and at right. All drawer position adjustments require removal of indicated screw on both adjustment mechanisms. Save screws for re-installation prior to any future cabinet shipment. OUT DOWN IN UP Front-to-Back Adjustment: Turn Black
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 Vertica is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Placement and Maintenance Vertica is designed for indoor use on level floors. Clean wood veneer with a moist cloth. Step 1 Unpack and Identify Unpack and identify the components at left. Note that some components are shipped inside the cabinet. The assembly workspace should be a non- marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at [email protected]. For all other concerns, please contact your BDI Retailer. Component List Designed by Matthew Weatherly. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. BDI are trademarks of Becker Designed, Inc. All Rights reserved. ©2014, BDI Made in China. 8556REV100815v3 Step 2 Install and tighten Cam Bolts (D) into Side Legs (G) using Phillips Screwdriver (A). Insert Wood Dowels (F) into corresponding holes of Side Legs (G). B2 - Leveler Wrench x 1 A - Phillips Screwdriver x 1 B1 - Hex Wrench x 1 C - Cabinet x 1 F - Wood Dowel x 2 E - Cam Fitting x 2 D - Cam Bolt x 2 H - Base Stretcher x 1 I - Center Leg x 1 G - Side Legs x 2 L - Adjustable Shelf x 1 M - Back Panel x 1 K - 1/4-20 x 100 mm Machine Screw x 6 J - 1/4-20 x 60 mm Machine Screw x 3 F D G F F D D G G vertica 8556 home theater a s s e m b l y i n s t r u c t i o n s bdiusa.com [email protected] TWO PERSON ASSEMBLY

BDI vertica Assembly instructions manual [PDF] (7 pages)

  • Identifier: id-2007022
  • Brand: BDI
  • Device: vertica Furniture
  • Type: PDF
  • Key Aspects: System Connectivity and Wiring Basics, Glossary of Technical Terms, System Limitations and Considerations
  • UPD Date: 23.08.2026
  • Source File: 2280836.pdf
  • Pages: 7
  • Description: Instructions for safe usage of the BDI vertica.
Pages Preview:
  • 2 a s s e m b l y i n s t r u c t i o n s bdiusa.com customerservice@bdiusa.com vertica 8558 home theater Step 3 Carefully lay Cabinet (C) on its back. Attach Base Stretcher (H) to bottom of Cabinet (C) using Screw (J). Only hand tighten screws at this point. TWO PERSON ASSEMBLY J J J H C C J x 3 Step 4 Align Cam Bolt (D) and Wood Dowel (F) of Side Legs (G) into their respective holes in Base Stretcher (H). G G H H D F G
  • 3 a s s e m b l y i n s t r u c t i o n s bdiusa.com customerservice@bdiusa.com vertica 8558 home theater K K K K K K I G G E E H A Step 5 Insert Cam Fittings (E) into holes of Base Stretcher (H) with the arrow of the Cam Fitting (E) pointing outward on each end of the Stretcher. Tighten each Cam Fitting (E) clockwise using Phillips Screwdriver (A) until it no longer rotates. Step 6 Using Hex Wrench (B1) attach Side Legs (G) and Center Leg (I) to bott
  • 4 a s s e m b l y i n s t r u c t i o n s bdiusa.com customerservice@bdiusa.com vertica 8558 home theater 1 2 C M The shelf pins located inside the outer cabinet spaces may be repositioned, allowing you to raise and lower the Adjustable Shelf (L) to the desired level. Step 7 Position Cabinet right side up while carefully supporting drawer fronts to prevent drawers from sliding open. Install Back Panel (M) to the backside of the Cabinet (C) by insertin
  • 5 a s s e m b l y i n s t r u c t i o n s bdiusa.com customerservice@bdiusa.com vertica 8558 home theater Step 8 Drawer Position Options Two (2) adjustment mechanisms are found on underside of each Vertica drawer, at left and at right. All drawer position adjustments require removal of indicated screw on both adjustment mechanisms. Save screws for re-installation prior to any future cabinet shipment. OUT DOWN IN UP Front-to-Back Adjustment: Turn Black
  • 6 a s s e m b l y i n s t r u c t i o n s bdiusa.com customerservice@bdiusa.com vertica 8558 home theater Fine tuning your new BDI Vertica Home Theater Furniture These steps are to be followed after you have unpacked and completed the simple assembly instructions for your Vertica AV cabinet. Due to jostling in freight or perhaps an uneven floor, the door on your Vertica cabinet may not appear to be in perfect alignment. Making a few minor adjustments
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 Vertica is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Placement and Maintenance Vertica is designed for indoor use on level floors. Clean wood veneer with a moist cloth. Step 1 Unpack and Identify Unpack and identify the components at left. Note that some components are shipped inside the cabinet. The assembly workspace should be a non- marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at [email protected]. For all other concerns, please contact your BDI Retailer. Component List Designed by Matthew Weatherly. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. BDI are trademarks of Becker Designed, Inc. All Rights reserved. ©2014, BDI Made in China. 8558REV101215v3 Step 2 Install and tighten Cam Bolts (D) into Side Legs (G) using Phillips Screwdriver (A). Insert Wood Dowels (F) into corresponding holes of Side Legs (G). B2 - Leveler Wrench x 1 A - Phillips Screwdriver x 1 B1 - Hex Wrench x 1 C - Cabinet x 1 F - Wood Dowel x 2 E - Cam Fitting x 2 D - Cam Bolt x 2 H - Base Stretcher x 1 I - Center Leg x 1 G - Side Legs x 2 L - Adjustable Shelf x 4 M - Back Panel x 2 K - 1/4-20 x 100 mm Machine Screw x 6 J - 1/4-20 x 60 mm Machine Screw x 3 F D G F F D D G G vertica 8558 home theater a s s e m b l y i n s t r u c t i o n s bdiusa.com [email protected] TWO PERSON ASSEMBLY

BDI vertica: Furniture, Indoor Furnishing Category Related Instructions

3119
South Shore 3119
29.08.2026 12 pages

ASSEMBLY INSTRUCTIONS INSTRUCTIONS D’ASSEMBLAGE INSTRUCCIONES DE ENSAMBLAJE - - 270 Model/ / Modelo Modèle Article/ / Articulo Item 10013785 Rev.:Ci2 25/09 2013 / 1-800-290-0465 Headboard 54”/60” Tête de lit 137/152 cm Cabecera 54”/60” 3119-3126-31 User instructions for the South Shore 3119 Racks & Stands. The manual outlines system configuration and internal layout, operating conditions, component replacement.

Tate
Crate&Barrel Tate
08.08.2026 5 pages

x 39 Not Included Non Inclus No Incluido 1/5 800.967.6696 | crateandbarrel.com Made in USA - 02 ! English This page lists the contents included in the box. Please take time to identify the hardware as well as the individual components of the product. As you u Device setup manual for the Crate&Barrel Tate Indoor Furnishing. It describes maintenance tasks and device overview, setup tips, hardware instructions.

859229
Next 859229
18.03.2026 11 pages

Need Help? With: Assembly instructions Missing or damaged parts CALL: 0333 777 8999 IMPORTANT - RETAIN FOR FUTURE REFERENCE RUBIX BED DOUBLE 859229 Assembly instructions Produced in Poland for Next Retail Ltd 859229-2014-V1 Actual product size H95 x W Instruction manual for the Next 859229 Indoor Furnishing. The manual provides information on firmware updates, error handling, troubleshooting guides, user instructions.

Maxine
Crate&Barrel Maxine
20.06.2026 7 pages

1/7 800.967.6696 | crateandbarrel.com Made in Phillipines - r05 English This page lists the contents included in the box. Please take time to identify the hardware as well as the individual components of the product. As you unpack and prepare for assembly, p User operation guide for the Crate&Barrel Maxine Indoor Furnishing. This manual describes setup, usage, and assembly reference, technical overview, software installation, interface navigation.